Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

P/N + Description + Content Search

Search Word's :

Part Name(s) : LME49990 LME49990MA/NOPB LME49990MAX/NOPB L49990MA TI
Texas Instruments
Description : Overture™ E-Series Ultra-low Distortion, Ultra-low Noise Operational Amplifier View

DESCRIPTION
The LME49990 is part of the Ultra-low Distortion, low Noise, high slew rate Operational Amplifier series optimized and fully specified for high performance, high fidelity applications. The LME49990 combines low voltage Noise density (0.9nV/√Hz) with vanishing low THD+N (0.00001%). The LME49990 has a high slew rate of ±22V/μs and an output current capability of ±27mA. It drives 600Ω loads to within 2V of either power supply voltage.

FEATURES
• Easily Drives 600Ω Load
• Output Short Circuit Protection

APPLICATIONS
• Ultra High Quality Audio Signal Processing
• Active Filters
• PreAmplifiers
• Spectrum Analyzers
• Ultrasound PreAmplifiers
• Sigma-Delta ADC/DAC Buffers
• The Exposed Pad (DAP) of Unit Should NOT be Grounded. It is Internally Connected to VEE.

Part Name(s) : NJM2122 NJM2122D NJM2122M JRC
Japan Radio Corporation
Description : ULTRA LOW Noise DUAL Operational Amplifier View

■ GENERAL DESCRIPTION

The NJM2122 is an ultra low Noise dual Operational Amplifier. The features of ultra low Noise, low operating voltage, and low saturation voltage are suitable for microphone Amplifier of digital audio items such as portable MD,DAT,and others.



■ FEATURES

● Operating Voltage ( ±2.0V~±7.0V )

● Ultra Low Noise Voltage ( 1.5nV/√Hz typ.@ f=1kHz )

● Low Saturation Output Voltage ( 0.3V typ. )

● Bipolar Technology

● Package Outline DIP8,DMP8


Part Name(s) : UPC4570 UPC4570C UPC4570G2 UPC4570HA ETC
Unspecified
Description : DUAL ULTRA LOW-Noise, WIDEBAND, Operational Amplifier View

DESCRIPTION

The µPC4570 is an ultra low-Noise, wideband high slew-rate, dual Operational Amplifier. Input equivalent Noise is three times better than the conventional 4558 type op-amps. The gain bandwidth products and the slew-rate are seven times better than 4558. In spite of fast AC performance, the  µPC4570 is extremely stable under voltage-follower circuit conditions. Supply current is also improved compared with conventional wideband op-amps. The µPC4570 is an excellent choice for pre-Amplifiers and active filters in audio, instrumentation, and communication circuits.



FEATURES

• Ultra low Noise : en = 4.5 nV/√Hz

• High slew rate : 7 V/µs

•High gain bandwidth product : GBW = 15 MHz at 100 kHz

•Internal frequency compensation


Part Name(s) : LM833 LM833D LM833N LM833S TGS
Tiger Electronic
Description : Low-Noise Dual Operational Amplifier View

DESCRIPTION
The LM833 is a high performance, low Noise dual Operational Amplifier. This Amplifier features popular pin-out, superior Noise performance, and superior total harmonic distortion. This Amplifier also features guaranteed Noise performance with substantially higher gain-bandwidth product and slew rate, which far exceeds that of the 4558 type Amplifier. The specially designed low Noise input transistors allow the LM833 to be used in very low Noise signal processing applications such as audio preAmplifiers and servo error Amplifier.

FEATURES
● Operating Voltage: ±4V~±18V
● Low Total Harmonic Distortion (0.001%typ.)
● Low Noise Voltage
● High Slew Rate (6V/µs typ.)
● Unity Gain Bandwidth (27MHz@f=10kHz)
● Bipolar Technology


Part Name(s) : OPA2604 OPA2604AP OPA2604APG4 OPA2604AU OPA2604AU/2K5 OPA2604AUE4 OPA2604AUG4 BURR-BROWN
Burr-Brown -> Texas Instruments
Description : Dual FET-Input / Low Distortion Operational Amplifier View

DESCRIPTION

The OPA2604 is a dual, FET-input Operational Amplifier designed for enhanced AC performance. Very low Distortion, low Noise and wide bandwidth provide superior performance in high quality audio and other

applications requiring excellent dynamic performance.



FEATURES

● LOW DISTORTION: 0.0003% at 1kHz

● LOW Noise: 10nV/√Hz

● HIGH SLEW RATE: 25V/µs

● WIDE GAIN-BANDWIDTH: 20MHz

● UNITY-GAIN STABLE

● WIDE SUPPLY RANGE: V

S = ±4.5 to ±24V

● DRIVES 600Ω LOADS



APPLICATIONS

● PROFESSIONAL AUDIO EQUIPMENT

● PCM DAC I/V CONVERTER

● SPECTRAL ANALYSIS EQUIPMENT

● ACTIVE FILTERS

● TRANSDUCER Amplifier

● DATA ACQUISITION


Part Name(s) : OPA2604 OPA2604AP OPA2604APG4 OPA2604AU OPA2604AU/2K5 OPA2604AUE4 OPA2604AUG4 BB
Burr-Brown -> Texas Instruments
Description : Dual FET-Input, Low Distortion Operational Amplifier View

DESCRIPTION

The OPA2604 is a dual, FET-input Operational Amplifier designed for enhanced AC performance. Very low Distortion, low Noise and wide bandwidth provide superior performance in high quality audio and other

applications requiring excellent dynamic performance.



FEATURES

● LOW DISTORTION: 0.0003% at 1kHz

● LOW Noise: 10nV/√Hz

● HIGH SLEW RATE: 25V/µs

● WIDE GAIN-BANDWIDTH: 20MHz

● UNITY-GAIN STABLE

● WIDE SUPPLY RANGE: V

S = ±4.5 to ±24V

● DRIVES 600Ω LOADS



APPLICATIONS

● PROFESSIONAL AUDIO EQUIPMENT

● PCM DAC I/V CONVERTER

● SPECTRAL ANALYSIS EQUIPMENT

● ACTIVE FILTERS

● TRANSDUCER Amplifier

● DATA ACQUISITION


Part Name(s) : OPA2604-Q1 OPA2604IDRQ1 Texas-Instruments
Texas Instruments
Description : DUAL FET-INPUT LOW-DISTORTION Operational Amplifier View

description

The OPA2604 is a dual, FET-input Operational Amplifier designed for enhanced AC performance. Very low Distortion, low Noise and wide bandwidth provide superior performance in high quality audio and other applications requiring excellent dynamic performance.

New circuit techniques and special laser trimming of dynamic circuit performance yield very low harmonic distortion. The result is an op amp with exceptional sound quality. The low-Noise FET input of the OPA2604 provides wide dynamic range, even with high source impedance. Offset voltage is laser-trimmed to minimize the need for interstage coupling capacitors.

The OPA2604 is available in a SO-8 surface-mount package, specified for the −40°C to +85°C temperature range.



features

• Qualification in Accordance With AEC-Q100†

• Qualified for Automotive Applications

• Customer-Specific Configuration Control Can Be Supported Along With Major-Change Approval

• Low Distortion: 0.0003% at 1 khz

• Low Noise: 10 nV/Hz

• High Slew Rate: 25 V/µs

• Wide Gain-Bandwidth: 20 MHz

• Unity-Gain Stable

• Wide Supply Range: VS = ±4.5 to ±24 V

• Drives 600 Ω Loads



applications

• Professional Audio Equipment

• PCM DAC I/V Converter

• Spectral Analysis Equipment

• Active Filters

• Transducer Amplifier

• Data Acquisition



 


Part Name(s) : OPA687 OPA687N OPA687N/250 OPA687N/3K OPA687U OPA687U/2K5 BB
Burr-Brown -> Texas Instruments
Description : SpeedPlus™ Wideband, Ultra-low Noise, Voltage Feedback Operational Amplifier With Power Down View

DESCRIPTION

The OPA687 combines a very high gain bandwidth and large signal performance with an Ultra-low input Noise voltage (0.95nV/√Hz) while dissipating only 18mA supply current. Where power savings is paramount, the OPA687 also includes an optional power down pin that, when pulled low, will disable the Amplifier and decrease the quiescent current to only 1% of its powered up value. This optional feature may be left disconnected to insure normal Amplifier operation when no power-down is required.



FEATURES

● HIGH GAIN BANDWIDTH: 3.8GHz

● LOW INPUT VOLTAGE Noise: 0.95nV/√Hz

● VERY LOW DISTORTION: –95dBc (5MHz)

● LOW DISABLED POWER: 2mW

● VERY HIGH SLEW RATE: 900V/µs

● STABLE FOR G ≥ 12



APPLICATIONS

● LOW DISTORTION ADC DRIVER

● OC-3 FIBER OPTIC RECEIVER

● LOW Noise DIFFERENTIAL AmplifierS

● EQUALIZING RECEIVERS

● ULTRASOUND CHANNEL AmplifierS

● IMPROVED REPLACEMENT FOR THE CLC425



 


Part Name(s) : OPA847 OPA847ID OPA847IDBV OPA847IDBVR OPA847IDBVT OPA847IDR BB
Burr-Brown -> Texas Instruments
Description : Wideband, Ultra-low Noise, Voltage-Feedback Operational Amplifier with Shutdown View

DESCRIPTION

The OPA847 combines very high gain bandwidth and large signal performance with an Ultra-low input Noise voltage (0.85nV/√Hz) while using only 18mA supply current. Where power savings is critical, the OPA847 also includes an optional power shutdown pin that, when pulled low, disables the Amplifier and decreases the supply current to < 1% of the powered-up value. This optional feature may be left disconnected to ensure normal Amplifier operation when no power down is required.



FEATURES

HIGH GAIN BANDWIDTH: 3.9GHz

LOW INPUT VOLTAGE Noise: 0.85nV/√Hz

VERY LOW DISTORTION: –105dBc (5MHz)

HIGH SLEW RATE: 950V/µs

HIGH DC ACCURACY: VIO< ±100µV

LOW SUPPLY CURRENT: 18.1mA

LOW SHUTDOWN POWER: 2mW

STABLE FOR GAINS ≥12



APPLICATIONS

HIGH DYNAMIC RANGE ADC PREAMPS

LOW Noise, WIDEBAND, TRANSIMPEDANCE AmplifierS

WIDEBAND, HIGH GAIN AmplifierS

LOW Noise DIFFERENTIAL RECEIVERS

ULTRASOUND CHANNEL AmplifierS

IMPROVED UPGRADE FOR THE OPA687, CLC425, AND LMH6624


12345678910 Next



All Rights Reserved© datasheetq.com 2015 - 2019  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]