The EN2, EP2, EPI and MR301 series power Relays can meet the requirements of high quality and reliability in automotive eIectronics applications. The EN2 and EP2 series are the twin Relays which have two units in one package and smaller than conventional two Relays. These Relays are divided into two types for different usage. One is H bridge type and the other is separate type. The EN2 series is suitable for heavy load applications (35 A max.). The EP2 series is designed for medium load applications (25 A max.). The EP1 and MR301 series are the 1C contact form Relays. Many of these Relays have been used in automotive electronics applications throughout the world
6 to 12 Amp Miniature Relay 2 or 4 Pole, PCB or Plug-in
Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application.
Features • Sensitive coil (750mW / 0.85VA). • 2 Form C and 4 Form C contacts rated 12A and 6A, respectively. • Advanced design has no braided wire, no welds or solder joints in the contact area and fewer parts for enhanced reliability. • AC and DC coils. • Optional integral LED (green for DC coil, red for AC coil), protection diode, resistor-capacitor network available. • Mounted height is approximately 1.42 in (36 mm). • Environmentally friendly, cadmium-free contacts.
FEATURES 1. Small, slim form factor Facilitating the form factor reduction of devices, the overall height of the relay package is less than half that of our HP relay. 2. High sensitivity The high-efficiency polarized electromagnetic mechanism in conjunction with our exclusive spring alignment method achieves levels of sensitivity higher than Relays that have been available up to now. For both the 2 Form C and 4 Form C single side stable and 2 coil latching types, the 150 mW minimum operating power level allows direct driving by transistor or chip controllers. 3. High reliability and long life With a structure that ensures almost perfectly complete twin contact and minimal contact bounce, you get greater reliability than has so far been provided by power Relays. 4. Latching types also available 1 coil latching and 2 coil latching types are available. In cases where it was formerly unavoidable to use pluralRelays for large power memory, you can now use a single SP relay. 5. Strong resistance to vibration and shock Our balanced armature technology well withstands vibration and shocks. It provides strong resistance to vibration and shock. 6. Terminals and mounting boards are available.
Several types of Reverse Power Relays are available including Relays sensitive to reverse reactive power (KVAR). WILMAR is the leading brand of reverse power Relays. Our rugged sealed construction provides continuous and reliable operation unaffected by shock, vibration or other severe environments. Reverse Power Relays are used for the protection of generator sets operating in parallel.
The NEC TOKIN’s Miniature Relays have evolved in response to various demands.
Communication equipment, measurement instrument, FA equipment, electric home appliances and automotive electronics, and all the rest. In line with the increasing range of functions and downsizing of the various equipments, miniature Relays have to respond to the demands of not only high performance and reliability, but also downsizing, low profile and environment resistance. NEC TOKIN uses the state-of-the-art technologies based on the integration of mechatronics and electronics, and has timely released excellent products. These are Miniature Signal Relays and Power Relays. They are ultra miniature and lightweight, and are suitable for high density packaging. In 2009 NEC TOKIN reached the 4 billion mark in the number of Relays shipped and is updating the record daily now.
NEC TOKIN provides the best-seller products already used for various applications, and variety of products such as a flat type for low profile mounting, a slim type for high density mounting, low power consumption type and excellent environment resistance type.
<Feature> • Compact, lightweight, ultra-low profile with high density • The low power consumption • Extremely durable plastic sealing • Small but high withstanding voltage • Lineup of SMTs (surface mount type) also available
2900 Series Reed Relays Ideally suited to the needs of Automated Test Equipment and RF requirements .The specification tables allow you to select the appropriate relay for your particular applica tion.
Slightly larger than the 2200 Series; these Relays provide maximum versatility with options such as a Form C with electrostatic or co-axial shielding .If your require ments differ, please consult your local representative or Coto’s Factory .
2900 Series Features * Very small, High reliability reed Relays * High Insulation Resistance * High speed switching compared to electromechanical Relays * Hermetically sealed contacts for long life * Epoxy coated steel shell provides magnetic shielding * Optional Electrostatic Shield for reducing capacitive coupling * Optional Coaxial Shield for 50Ω impedance and switching of fast rise time digital pulses * RoHS compliant (except for 2920)
MICROMINIATURE REED Relays Ideally suited to the needs of Automated Test Equipment and RF requirements. The specification tables allow you to select the appropriate relay for your particular application. Slightly larger than the 2200 Series; these Relays provide maximum versatility with options such as electrostatic and coaxial shielding. If your requirements differ, please consult your local representative or Coto’s Factory.
2900 SERIES FEATURES ◆ Very small (0.20 in2), high reliability reed Relays. ◆ High Insulation Resistance - 1012 Ω offered on some models. ◆ High speed switching compared to electromechanical Relays. ◆ Hermetically sealed contacts for long life. ◆ Epoxy coated steel shell provides magnetic shielding. ◆ Optional Electrostatic Shield for reducing capacitive coupling. ◆ Optional Coaxial Shield for 50 Ω impedance and switching of fast rise time digital pulses.
Several types of Reverse Power Relays are available including Relays sensitive to reverse reactive power (KVAR). WILMAR is the leading brand of reverse power Relays. Our rugged sealed construction provides con tinuous and reliable operation unaffected by shock, vibration or other severe environments. Reverse Power Relays are used for the protection of generator sets operating in parallel.
• Line Voltage ........................ Model 710X = 120 V, 220 V or 266 V line to neutral sensing • Line Frequency ................... 50-500 Hz. • Current Requirements ......... 0 to 5 amp max direct or from CT with 5 amp secondary • Trip Adjustment ................... Screwdriver adjustable 4% to 20% (of the 5 amp rating) • Contact Ratings ................... 5 amp resistive at 120 AC or 28 Vdc • Power Consumption ............ Voltage circuit: 2 VA max. Current circuit: 4 VA max.
Description LAA110L is a Dual 1 Form-A solid state relay that has two independently controlled optically coupled MOSFETs with an additional current limiting circuit. The efficient MOSFET switches and photovoltaic die use Clare’s patented OptoMOS architecture to provide 3750 VRMS of input to output isolation. The optically coupled inputs are controlled by highly efficient GaAIAs infrared LEDs. Dual pole OptoMOS Relays provide a more compact design solution than discrete single pole Relays in a variety of applications. The dual pole Relays save board space by incorporating both Relays in a single 8-pin package.
Features • Small 8 Pin DIP Package • Current Limit • Low Drive Power Requirements (TTL/CMOS Compatible) • No Moving Parts • High Reliability • Arc-Free With No Snubbing Circuits • 3750VRMS Input/Output Isolation • No EMI/RFI Generation • Machine Insertable, Wave Solderable • Surface Mount and Tape & Reel Versions Available