Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits
Part name(s)'  

P/N + Description + Content Search

Search Word's :

Part name(s)' : LM101AH-QMLV LM101AHRQMLV LM101AJ-QMLV LM101AW-QMLV LM101AWRQMLV
Description : SINGLE OPERATIONAL AMPLIFIER - EXTERNALLY COMPENSATED: ALSO AVAILABLE GUARANTEED TO 100k rd(Si) TESTED TO MIL-STD-883, METHOD 1019
National-Semiconductor
National ->Texas Instruments

General Description

The LM101A is a general purpose OPERATIONAL AMPLIFIER which features improved performance over industry standards such as the LM709. Advanced processing techniques make possible an order of magnitude reduction in input currents, and a redesign of the biasing circuitry reduces the temperature drift of input current.

This AMPLIFIER offers many features which make its application nearly foolproof: overload protection on the input and output, no latch-up when the common mode range is exceeded, and freedom from oscillations and compensation with a SINGLE 30 pF capaciTOr. It has advantages over internally compensated AMPLIFIERs in that the frequency compensation can be tailored TO the particular application. For example, in low frequency circuits it can be overcompensated for increased stability margin. Or the compensation can be optimized TO give more than a facTOr of ten improvement in high frequency performance for most

applications.


View
Part name(s)' : NE5532NB
Description : Internally-compensated dual low noise OPERATIONAL AMPLIFIER
Philips
Philips Electronics

The 5532 is a dual high-performance low noise OPERATIONAL AMPLIFIER. Compared TO most of the standard OPERATIONAL AMPLIFIERs, such as the 1458, it shows better noise performance, improved output drive capability and considerably higher small-signal and power bandwidths.






1. Small-signal bandwidth: 10MHz

2. Output drive capability: 600Ω, 10VRMS

3. Input noise voltage:  5nV Hz (typical)

4. DC voltage gain: 50000

5. AC voltage gain: 2200 at 10kHz

6. Power bandwidth: 140kHz

7. Slew rate: 9V/µs

8. Large supply voltage range: ±3 TO ±20V

9. Compensated for unity gain


View
Part name(s)' : NE5532 NE5532A NE5532AD8 NE5532AF NE5532AN NE5532D NE5532D8 NE5532FE NE5532N SA5532 SA5532A SA5532AD8 SA5532AN SA5532D8 SA5532N SE5532 SE5532A SE5532AD8 SE5532AF SE5532AFE SE5532D8 SE5532FE SE5532N
Description : Internally-compensated dual low noise OPERATIONAL AMPLIFIER
Philips
Philips Electronics

DESCRIPTION

The 5532 is a dual high-performance low noise OPERATIONAL AMPLIFIER. Compared TO most of the standard OPERATIONAL AMPLIFIERs, such as the 1458, it shows better noise performance, improved output drive capability and considerably higher small-signal and power bandwidths.

This makes the device especially suitable for application in high-quality and professional audio equipment, instrumentation and control circuits, and telephone channel AMPLIFIERs. The op amp is internally compensated for gains equal TO one. If very low noise is of prime importance, it is recommended that the 5532A version be used because it has GUARANTEED noise voltage specifications.



FEATURES

• Small-signal bandwidth: 10MHz

• Output drive capability: 600Ω, 10VRMS

• Input noise voltage: 5nV/√Hz (typical)

• DC voltage gain: 50000

• AC voltage gain: 2200 at 10kHz

• Power bandwidth: 140kHz

• Slew rate: 9V/µs

• Large supply voltage range: ±3 TO ±20V

• Compensated for unity gain



 


View
Part name(s)' : NTE992
Description : Integrated Circuit Quad, SINGLE Supply OPERATIONAL AMPLIFIER
NTE-Electronic
NTE Electronics

Description:
The NTE992 is an internally compensated NorTOn OPERATIONAL AMPLIFIER in a 14–Lead DIP type package designed specifically for SINGLE positive power supply applications found in industrial control systems and auTOmotive electronics. This device contains four independent AMPLIFIERs – making it ideal for applications such as active filters, multi–channel AMPLIFIERs, tachometers, oscillaTOrs, and other similar usages.

Features:
SINGLE–Supply Operation
● Internally Compensated
● Wide Unity Gain Bandwidth: 4MHz Typ
● Low Input Bias Current: 50nA Typ
● High Open–Loop Gain: 1000V/V Min
● Large Output Voltage Swing: (VCC –1) VP–P

View

Part name(s)' : TS271 TS271ACDT TS271AIDT TS271BIDT TS271CDT TS271IDT
Description : CMOS Programmable Low Power SINGLE OPERATIONAL AMPLIFIER
ST-Microelectronics
STMicroelectronics

Description

The TS271 is a low cost, low power SINGLE OPERATIONAL AMPLIFIER designed TO operate with SINGLE or dual supplies. This OPERATIONAL AMPLIFIER uses the ST silicon gate CMOS process giving it an excellent consumption-speed ratio. This AMPLIFIER is ideally suited for low consumption applications.

The power supply is EXTERNALLY programmable with a resisTOr connected between pins 8 and 4. It allows TO choose the best consumption-speed ratio and supply current can be minimized according TO the required speed. This device is specified for the following ISET current values: 1.5µA, 25µA, 130µA.



■ Offset null capability (by external compensation)

■ Dynamic characteristics adjustable ISET

■ Consumption current and dynamic parameters are stable regarding the voltage power supply variations

■ Output voltage can swing TO ground

■ Very large ISET range

■ Stable and low offset voltage

■ Three input offset voltage selections


View
Part name(s)' : MC3405 MC3405P
Description : Dual OPERATIONAL AMPLIFIER and Dual ComparaTOr
Motorola
Motorola => Freescale

The MC3405 contains two differential–input OPERATIONAL AMPLIFIERs andtwo comparaTOrs, each set capable of SINGLE supply operation. This OPERATIONAL AMPLIFIER–comparaTOr circuit fulfills its applications as a general purpose product for auTOmotive and consumer circuits as well as an industrial building block.
The MC3405 is specified over the commercial operating temperature range of 0° TO +70°C.

OPERATIONAL AMPLIFIER Equivalent in Performance TO MC3403
• ComparaTOr Similar in Performance TO LM339
SINGLE Supply Operation: 3.0 V TO 36 V
• Split Supply Operation: ±1.5 V TO ±18 V
• Low Supply Current Drain
OPERATIONAL AMPLIFIER is Internally Frequency Compensated
• ComparaTOr TTL and CMOS Compatible

View
Part name(s)' : MC3405P MC3405
Description : Dual OPERATIONAL AMPLIFIER and Dual ComparaTOr
ON-Semiconductor
ON Semiconductor

The MC3405 contains two differential–input OPERATIONAL AMPLIFIERs andtwo comparaTOrs, each set capable of SINGLE supply operation. This OPERATIONAL AMPLIFIER–comparaTOr circuit fulfills its applications as a general purpose product for auTOmotive and consumer circuits as well as an industrial building block.
The MC3405 is specified over the commercial operating temperature range of 0° TO +70°C.

OPERATIONAL AMPLIFIER Equivalent in Performance TO MC3403
• ComparaTOr Similar in Performance TO LM339
SINGLE Supply Operation: 3.0 V TO 36 V
• Split Supply Operation: ±1.5 V TO ±18 V
• Low Supply Current Drain
OPERATIONAL AMPLIFIER is Internally Frequency Compensated
• ComparaTOr TTL and CMOS Compatible

View
Part name(s)' : LM201A LM201AV LM301A LM301AD LM301ADG LM301ADR2 LM301ADR2G LM301AN LM301ANG LM201AD LM201ADG LM201ADR2 LM201ADR2G LM201AN LM201ANG LM201AVDR2 LM201AVDR2G
Description : Non Compensated SINGLE OPERATIONAL AMPLIFIERs
ON-Semiconductor
ON Semiconductor

A general purpose OPERATIONAL AMPLIFIER that allows the user TO choose the compensation capaciTOr best suited TO his needs. With proper compensation, summing AMPLIFIER slew rates TO 10 V/s can be obtained.

Features
• Low Input Offset Current: 20 nA Maximum Over Temperature Range
• External Frequency Compensation for Flexibility
• Class AB Output Provides Excellent Linearity
• Output Short Circuit Protection
GUARANTEED Drift Characteristics
• Pb−Free Packages are AVAILABLE

View
Part name(s)' : NJM2058 NJM2058D NJM2058M NJM2058V
Description : QUAD OPERATIONAL AMPLIFIER
JRC
Japan Radio Corporation

QUAD OPERATIONAL AMPLIFIER



■ GENERAL DESCRIPTION

The NJM2058 integrated circuit is a quad high-gain OPERATIONAL AMPLIFIER internally compensated and constructed on a SINGLE silicon chip using an advanced epitaxial process.

Each AMPLIFIER of the NJM2058 has the same electrical characteristics of the NJM4558.





■ FEATURES

● Operating Voltage ( ±4V~±18V )

● Package Outline DIP14,DMP14,SSOP14

● Bipolar Technology


View
12345678910 Next



All Rights Reserved© datasheetq.com 2015 - 2019  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]