P/N + Description + Content Search

GENERAL DESCRIPTION

The ISD5100 ChipCorder Series provide high quality, fully integrated, SINGLE-CHIP RECORD/PLAYBACK solutions for 1- to 16-minute messaging applications that are ideal for use in cellular phones, automotive communications, GPS/navigation systems and other portable products. The ISD5100 Series products are an enhancement of the ISD5000 architecture, providing: 1) the I2C serial port -address, control and DURATION selection are accomplished through an I2C interface to minimize pin count (ONLY two control lines required); 2) the capability of storing DIGITAL data, in addition to analog data. This feature allows customers to store phone numbers, system configuration parameters and message address locations for message management capability; 3) Various internal circuit blocks can be individually powered-up or -down for power saving.

FEATURES

Fully-Integrated Solution

• SINGLE-CHIP VOICE RECORD/PLAYBACK solution

• Dual STORAGE of DIGITAL and analog data

• DURATIONs

   8 to 16-minute (ISD5116)

   4 to 8-minute (ISD5108)

   2 to 4-minute (ISD5104)

   1 to 2-minute (ISD5102)

Low Power Consumption

• +2.7 to +3.3V (VCC) Supply Voltage

• Supports 2.0V and 3.0V interface logic

• Operating Current:

   ICC Play = 15 mA (typical)

   ICC Rec = 30 mA (typical)

   ICC Feedthrough = 12 mA (typical)

• Standby Current:

   ISB = 1µA (typical)

• Most stages can be individually powered down to minimize power consumption

Enhanced VOICE Features

• One or two-way conversation record

• One or two-way message playback

• VOICE memo record and playback

• Private call screening

• In-terminal answering machine

• Personalized outgoing message

• Private call announce while on call

DIGITAL Memory Features

• Up to 4 Mb available (ISD5116)

• Up to 2 Mb available (ISD5108)

• Up to 1 Mb available (ISD5104)

• Up to 512Kb available (ISD5102)

• STORAGE of phone numbers, system configuration parameters and message address table in cellular application

Easy-to-use and Control

• No compression algorithm development required

• User-controllable sampling rates

• Programmable analog interface

• Standard & Fast mode I2C serial interface (100kHz – 400 kHz)

• Fully addressable for multiple messages

High Quality Solution

• High quality VOICE and music reproduction

• Winbond’s standard 100-year message retention (typical)

• 100K record cycles (typical) for analog data

• 10K record cycles (typical) for DIGITAL data

Options

• Available in die form, TSOP and SOIC and PDIP (ISD5116 Only)

• Temperature: Commercial – Packaged (0 to +70°C) & die (0 to +50°C); Industrial (-40 to +85°C)

GENERAL DESCRIPTION
The ISD MicroTAD-16M ChipCorder¨ Product provides high-quality, 3-volt, SINGLE-CHIP RECORD/PLAYBACK solutions for 16-minute messaging applications which are ideal for telephone answering DEVICES (TADs). The CMOS-based DEVICES include an on-chip oscillator, antialiasing filter, smoothing filter, AutoMute™ feature, audio amplifier, and high density, multilevel Flash STORAGE array. The ISD MicroTAD-16M is designed to be used in a microprocessor- or microcontroller-based system.

FEATURES
• SINGLE-CHIP VOICE RECORD/PLAYBACK solution
• Single +3 volt supply
• Low-power consumption
    - Operating current: ICC Play = 15 mA (typical) ICC Rec = 25 mA (typical)
    - Standby current: 1 µA (typical)
• SINGLE-CHIP DURATION of 16 MINUTES
• 4.0 KHz sample rate
• Typical band pass filter 1.7 KHz
• High-quality, natural VOICE/audio reproduction
• AutoMute feature provides background noise attenuation during periods of silence
• No algorithm development required
• Microcontroller SPI or Microwire™ Serial Interface
• Fully addressable to handle multiple messages
• Nonvolatile message STORAGE
• Power consumption controlled by SPI or Microwire control register
• 100-year message retention (typical)
• 100K record cycles (typical)
• On-chip clock source
• Available in die form, PDIP, SOIC, and TSOP

SINGLE-CHIP VOICE RECORD/PLAYBACK DEVICES 16-and 20-Second DURATIONs

GENERAL DESCRIPTION

Information STORAGE DEVICES’ ISD1000A Chip Corder® Series provides high-quality, SINGLE-CHIP RECORD/PLAYBACK solutions for 16- and 20-second messaging applications. The CMOS DEVICES include an on-chip oscillator, microphone pream plifier, automatic gain control, antialiasing filter, smoothing filter, and speaker amplifier. In addition, the ISD1000A Series is fully microprocessor compatible, allowing complex messaging and addressing to be achieved.

FEATURES

• Easy-to-use SINGLE-CHIP VOICE Record/Play back solution

• High-quality, natural VOICE/audio reproduction

• Manual switch or microcontroller compatible

  – Playback can be edge- or level activated

• SINGLE-CHIP DURATIONs of 16 and 20 seconds

• Directly cascadable for longer DURATIONs

• Power-down mode

  –1 µA standby current (typical)

• Zero-power message STORAGE

  – Eliminates battery backup circuits

• Fully addressable to handle multiple messages

• 100-year message retention (typical)

• 100,000 record cycles (typical)

• On-chip clock source

• No algorithm development required

• Single +5 volt supply

• Available in die form, DIP, and SOIC packaging

• Industrial temperature (-40°C to +85°C) version available

[Winbond]

GENERAL DESCRIPTION
Winbond’s ISD2500 ChipCorder® Series provide high-quality, SINGLE-CHIP, RECORD/PLAYBACK solutions for 60- to 120-second messaging applications. The CMOS DEVICES include an on-chip oscillator, microphone preamplifier, automatic gain control, antialiasing filter, smoothing filter, speaker amplifier, and high density multi-level STORAGE array. In addition, the ISD2500 is microcontroller compatible, allowing complex messaging and addressing to be achieved. Recordings are stored into on-chip nonvolatile memory cells, providing zero-power message STORAGE. This unique, SINGLE-CHIP solution is made possible through Winbond’s patented multilevel STORAGE technology. VOICE and audio signals are stored directly into memory in their natural form, providing high-quality, solid-state VOICE reproduction.

FEATURES
• Easy-to-use SINGLE-CHIP, VOICE RECORD/PLAYBACK solution
• High-quality, natural VOICE/audio reproduction
• SINGLE-CHIP WITH DURATION of 60, 75, 90, or 120 seconds.
• Manual switch or microcontroller compatible
• Playback can be edge- or level-activated
• Directly cascadable for longer DURATIONs
• Automatic power-down (push-button mode)
    - Standby current 1 µA (typical)
• Zero-power message STORAGE
    - Eliminates battery backup circuits
• Fully addressable to handle multiple messages
• 100-year message retention (typical)
• 100,000 record cycles (typical)
• On-chip clock source
• Programmer support for play-only applications
• Single +5 volt power supply
• Available in die form, PDIP, SOIC and TSOP packaging
• Packaged type: leaded and lead-free
• Temperature = die (0°C to +50°C) and package (0°C to +70°C)

SINGLE-CHIP VOICE RECORD/PLAYBACK DEVICES 10- and 12-Second DURATIONs

GENERAL DESCRIPTION

Information STORAGE DEVICES' ISD2500 Chip Corder® Series provides high-quality, SINGLE-CHIP RECORD/PLAYBACK solutions for 32- to 120-second messaging applications. The CMOS DEVICES include an on-chip oscillator, microphone preamplifier, automatic gain control, antialiasing filter, smoothing filter, speaker amplifier, and high density multi-level STORAGE array. In addition, the ISD2500 is microcontroller compatible, allowing complex messaging and addressing to be achieved.

FEATURES

• Easy-to-use SINGLE-CHIP VOICE Record/ Playback solution

• High-quality, natural VOICE/audio reproduction

• Manual switch or microcontroller compatible Playback can be edge- or level activated

• SINGLE-CHIP DURATIONs of 32*, 40*, 48*, 64*,60, 75, 90, and 120 seconds

• Directly cascadable for longer DURATIONs

• Automatic Power-Down (Push-Button Mode)

– Standby current 1 µA (typical)

• Zero-power message STORAGE

– Eliminates battery backup circuits

• Fully addressable to handle multiple messages

• 100-year message retention (typical)

• 100,000 record cycles (typical)

• On-chip clock source

• No algorithm development required

• Single +5 volt power supply

• Available in die form, DIP, SOIC, and TSOP packaging

• Industrial temperature (-40°C to +85°C) versions available

GENERAL DESCRIPTION

Information STORAGE DEVICES’ ISD1000A Chip Corder® Series provides high-quality, SINGLE-CHIP RECORD/PLAYBACK solutions for 16- and 20-second messaging applications. The CMOS DEVICES include an on-chip oscillator, microphone pream plifier, automatic gain control, antialiasing filter, smoothing filter, and speaker amplifier. In addition, the ISD1000A Series is fully microprocessor compatible, allowing complex messaging and addressing to be achieved.

FEATURES

• Easy-to-use SINGLE-CHIP VOICE Record/Play back solution

• High-quality, natural VOICE/audio reproduction

• Manual switch or microcontroller compatible

  – Playback can be edge- or level activated

• SINGLE-CHIP DURATIONs of 16 and 20 seconds

• Directly cascadable for longer DURATIONs

• Power-down mode

  –1 µA standby current (typical)

• Zero-power message STORAGE

  – Eliminates battery backup circuits

• Fully addressable to handle multiple messages

• 100-year message retention (typical)

• 100,000 record cycles (typical)

• On-chip clock source

• No algorithm development required

• Single +5 volt supply

• Available in die form, DIP, and SOIC packaging

• Industrial temperature (-40°C to +85°C) version available

[ISD]

SINGLE-CHIP VOICE RECORD/PLAYBACK DEVICES 16-and 20-Second DURATIONs

GENERAL DESCRIPTION
Winbond’s ISD2500 ChipCorder® Series provide high-quality, SINGLE-CHIP,RECORD/PLAYBACK solutions for 32- to 64-second messaging  applications. The CMOS DEVICES include an on-chip oscillator, microphone preamplifier, automatic gain control, antialiasing filter, smoothing filter, speaker amplifier, and high density multi-level STORAGE array. In addition, the ISD2500 is microcontroller compatible, allowing complex messaging and addressing to be achieved. Recordings are stored into on-chip nonvolatile memory cells, providing zero-power message STORAGE.

FEATURES
• Single 5 volt power supply
• SINGLE-CHIP WITH DURATION of 32, 40, 48, or 64 seconds.
• Easy-to-use SINGLE-CHIP, VOICE RECORD/PLAYBACK solution
• High-quality, natural VOICE/audio reproduction
• Manual switch or microcontroller compatible
• Playback can be edge- or level-activated
• Directly cascadable for longer DURATIONs
• Automatic power-down (push-button mode)
  - Standby current 1 µA (typical)
• Zero-power message STORAGE
  - Eliminates battery backup circuits
• Fully addressable to handle multiple messages
• 100-year message retention (typical)
• 100,000 record cycles (typical)
• On-chip clock source
• Programmer support for play-only applications
• Available in die form, PDIP, SOIC and TSOP packaging
• Temperature options: die (0°C to +50°C) and package (0°C to +70°C)