Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

P/N + Description + Content Search

Search Word's :

Part Name(s) : 1N5907_03 1N5908_03 1N5907TR_03 1N5908TR_03 Microsemi
Microsemi Corporation
Description : 1500 Watt LOW Voltage Transient Voltage Suppressor View

DESCRIPTION
This pair of unidirectional low Voltage Transient Voltage Suppressor (TVS) devices for the 1N5907 and 1N5908 JEDEC registrations with different packages have the same high Peak Pulse Power rating of 1500 W with extremely fast response times. The 1N5907 is available in a military qualified version as described in the Features section herein. They are most often used for protecting against Transients from inductive switching environments, induced RF effects, or induced secondary lightning effects as found in surge levels of IEC61000-4-5 described herein. They are also very successful in protecting airborne avionics and electrical systems when low Voltage is required. Since their response time is virtually instantaneous, they can also protect from ESD and EFT per IEC61000-4-2 and IEC61000-4-4.

FEATURES
• Unidirectional TVS series for thru-hole MOUNTing
• Suppresses Transients up to 1500 Watts @ 10/1000 µs (Figure 1)
   in less than 100 pico seconds
• Low working Voltage (VWM) of 5 V
• Hermetic sealed DO-13 metal package for 1N5907 and plastic
   “Case 1” for 1N5908
• JAN/TX/TXV military qualification available for 1N5907 per MIL
   PRF-19500/500 by adding JAN, JANTX, or JANTXV prefix, e.g.
   JANTXV1N5907
SURFACE MOUNT equivalent packages also available as SMCJ5.0
   or SMCG5.0 in separate data sheet (consult factory for other
   SURFACE MOUNT options)

APPLICATIONS / BENEFITS  
• Protection from switching Transients and induced RF
• Protects TTL, ECL, DTL, MOS, MSI, and other
   integrated circuits requiring 5.0 V or lower power
   supplies
• Protection from ESD and EFT per IEC 61000-4-2 and
   IEC 61000-4-4
• Secondary lightning protection per IEC61000-4-5 with
   42 Ohms source impedance: Class 1 thru 4
• Secondary lightning protection per IEC61000-4-5 with
   12 Ohms source impedance: Class 1 thru 4
• Secondary lightning protection per IEC61000-4-5 with
   2 Ohms source impedance: Class 2 & 3
• 1N5907 Inherently radiation hard as described in
   Microsemi MicroNote 050

Part Name(s) : 1N5907 1N5907TR 1N5908 1N5908TR JAN1N5907 JAN1N5908 JANTX1N5907 JANTX1N5908 JANTXV1N5907 JANTXV1N5908 Microsemi
Microsemi Corporation
Description : 1500 Watt LOW Voltage Transient Voltage Suppressor View

DESCRIPTION
This pair of unidirectional low Voltage Transient Voltage Suppressor (TVS) devices for the 1N5907 and 1N5908 JEDEC registrations with different packages have the same high Peak Pulse Power rating of 1500 W with extremely fast response times. The 1N5907 is available in a military qualified version as described in the Features section herein. They are most often used for protecting against Transients from inductive switching environments, induced RF effects, or induced secondary lightning effects as found in surge levels of IEC61000-4-5 described herein. They are also very successful in protecting airborne avionics and electrical systems when low Voltage is required. Since their response time is virtually instantaneous, they can also protect from ESD and EFT per IEC61000-4-2 and IEC61000-4-4. Both hermetic seal and molded types are available.

FEATURES
• Unidirectional TVS series for thru-hole MOUNTing
• Suppresses Transients up to 1500 Watts @ 10/1000 µs (Figure 1) in less than 100 pico seconds
• Low working Voltage (VWM) of 5 V
• Hermetic sealed DO-13 metal package for 1N5907 and plastic “Case 1” for 1N5908
• JAN/TX/TXV military qualification available for 1N5907 per MILPRF-19500/500 by adding JAN, JANTX, or JANTXV prefix, e.g. JANTXV1N5907
SURFACE MOUNT equivalent packages also available as SMCJ5.0 or SMCG5.0 in separate data sheet (consult factory for other SURFACE MOUNT options)

APPLICATIONS / BENEFITS
• Protection from switching Transients and induced RF
• Protects TTL, ECL, DTL, MOS, MSI, and other integrated circuits requiring 5.0 V or lower power supplies
• Protection from ESD and EFT per IEC 61000-4-2 and IEC 61000-4-4
• Secondary lightning protection per IEC61000-4-5 with 42 Ohms source impedance: Class 1 thru 4
• Secondary lightning protection per IEC61000-4-5 with 12 Ohms source impedance: Class 1 thru 4
• Secondary lightning protection per IEC61000-4-5 with 2 Ohms source impedance: Class 2 & 3
• 1N5907 Inherently radiation hard as described in Microsemi MicroNote 050

Part Name(s) : SMAJ180A SMAJ180CA SMAJ200A SMAJ200CA SMAJ220A SMAJ220CA SMAJ250A SMAJ250CA SMAJ300A SMAJ300CA MDE-Semiconductor
MDE Semiconductor
Description : SURFACE MOUNT Transient Voltage Suppressor View

SURFACE MOUNT Transient Voltage Suppressor
Voltage-5.0 TO 440 Volts 400 Watt Peak Pulse Power

FEATURES
• For SURFACE MOUNTed applications in order to optimize board space
• Low profile package
• Built-in strain relief
• Glass passivated junction
• Low inductance
• Excellent clamping capability
• Repetition rate (duty cycle):0.01%
• Fast response time: typically less than 1.0 ps from 0 volts to BV for unidirectional types
• Typical IR less than 1µA above 10V
• High temperature soldering: 250°C/10 seconds at terminals
• Plastic package has Underwriters Laboratory
  Flammability Classification 94 V-O

Part Name(s) : 1N5555 1N5555TR 1N5556 1N5556TR 1N5557 1N5557TR 1N5558 1N5558TR JAN1N5555 JAN1N5555TR Microsemi
Microsemi Corporation
Description : 1500 Watt UNIDIRECTIONAL Transient Voltage Suppressor View

DESCRIPTION

This Transient Voltage Suppressor (TVS) series for 1N5555 thru 1N5558 are JEDEC registered selectionsfor unidirectional devices. All have the samehigh  Peak Pulse Power ratingof 1500 W with extremely fast responsetimes. They arealso available in military qualified selectionsas described inthe Featuressection herein. They aremost often usedfor protecting against Transients from  inductive switching environments, induced RF effects, or induced secondary lightningeffects asfound in lower surge levels of IEC61000-4-5. 



Part Name(s) : P6SMB120CAC P6SMB120CC TSC
TSC Corporation
Description : SURFACE MOUNT Transient Voltage Suppressor Voltage Range 6.8 to 200 Volts View

SURFACE MOUNT Transient Voltage Suppressor



Features

For SURFACE MOUNTed application in order to optimize board space

Low profile package 

Built-in strain relief

Glass passivated junction

Excellent clamping capability

Fast response time: Typically less than 1.0ps from 0 volt to BV min.

Typical IRless than 1μA above 10V

High temperature soldering guaranteed: 250OC / 10 seconds at terminals

Plastic material used carries Underwriters Laboratory Flammability Classification 94V-0

600 Watts peak pulse power capability with a 10 x 1000 us waveform by 0.01% duty cycle



Mechanical Data

Case: Molded plastic 

Terminals: Solder plated

Polarity: Indicated by cathode band

Standard packaging: 12mm tape (EIA STD RS-481)

Weight: 0.093gram


Part Name(s) : SM6A27 GE
General Semiconductor
Description : SURFACE MOUNT AUTOMOTIVE Transient Voltage Suppressor View

SURFACE MOUNT AUTOMOTIVE Transient Voltage Suppressor

Zener Voltage -27.0 Volts  Peak Pulse Current - 90.0 Amps



FEATURES

 Ideally suited for load dump protection

 Plastic package has Underwriters Laboratory

  Flammability Classification 94V-0

 High temperature stability due to unique oxide passiva

Exclusive patented PAR™ oxide passivated chip construction

Integrally molded heatsink provides a very low thermal resistance for maximum heat dissipation

Low leakage current at TJ=175°C

Low forward Voltage drop

High temperature soldering guaranteed: 260°C for 10 seconds at terminals


Part Name(s) : SM8A27 General
General Semiconductor
Description : SURFACE MOUNT AUTOMOTIVE Transient Voltage Suppressor View

SURFACE MOUNT AUTOMOTIVE Transient Voltage Suppressor

Zener Voltage -27.0 Volts  Peak Pulse Current - 130.0 Amps



FEATURES

 Ideally suited for load dump protection

 Plastic package has Underwriters Laboratory

   Flammability Classification 94V-0

 High temperature stability due to unique oxide passivation

 Exclusive patented PAR™ oxide passivated chip construction

 Integrally molded heatsink provides a very low thermal resistance for maximum heat dissipation

 Low leakage current at TJ=175°C

 Low forward Voltage drop

 High temperature soldering guaranteed: 260°C for 10 seconds at terminals


Part Name(s) : 1.5SMCJ19 1.5SMCJ19A 1.5SMCJ19C 1.5SMCJ19CA PanJit
PANJIT INTERNATIONAL
Description : SURFACE MOUNT Transient Voltage Suppressor PEAK PULSE POWER 1500 Watts View

STAND-OFF Voltage 5.0 to 220 Volts

FEATURES
• For SURFACE MOUNTed applications in order to optimize board space.
• Low profile package
• Built-in strain relief
• Glass passivated junction
• Low inductance
• Plastic package has Underwriters Laboratory Flammability
   Classification 94V-O
• High temperature soldering : 260°C /10 seconds at terminals
• In compliance with EU RoHS 2002/95/EC directives

Part Name(s) : 1.5KEXXXA 1.5KEXXXAG 1.5KEXXXARL4 1.5KEXXXARL4G 1N6267A07 1N6XXXA 1N6XXXAG 1N6XXXARL4 1N6XXXARL4G ON-Semiconductor
ON Semiconductor
Description : 1500 Watt Mosorb™ Zener Transient Voltage Suppressors View

1500 Watt Mosorb™ Zener Transient Voltage Suppressors Unidirectional*



Mosorb devices are designed to protect Voltage sensitive components from high Voltage, high−energy Transients. They have excellent clamping capability, high surge capability, low zener

impedance and fast response time. These devices are ON Semiconductor’s exclusive, cost-effective, highly reliable Surmeticaxial leaded package and are ideally-suited for use in communication systems, numericalcontrols, process controls, medical equipment, business machines, power supplies and many other industrial/consumer applications, to protect CMOS, MOS and Bipolar integrated circuits.



Features

•Working Peak Reverse Voltage Range − 5.8 V to 214 V

•Peak Power − 1500 Watts @ 1 ms

•ESD Rating of Class 3 (>16 kV) per Human Body Model

•Maximum Clamp Voltage @ Peak Pulse Current

•Low Leakage < 5 A Above 10 V

•UL 497B for Isolated Loop Circuit Protection

•Response Time is Typically < 1 ns

•Pb−Free Packages are Available


12345678910 Next



All Rights Reserved© datasheetq.com 2015 - 2019  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]