P/N + Description + Content Search

SURFACE MOUNT AUTOMOTIVE TRANSIENT VOLTAGE SUPPRESSOR

Zener VOLTAGE -27.0 Volts  Peak Pulse Current - 90.0 Amps

FEATURES

 Ideally suited for load dump protection

 Plastic package has Underwriters Laboratory

  Flammability Classification 94V-0

 High temperature stability due to unique oxide passiva

Exclusive patented PAR™ oxide passivated chip construction

Integrally molded heatsink provides a very low thermal resistance for maximum heat dissipation

Low leakage current at TJ=175°C

Low forward VOLTAGE drop

High temperature soldering guaranteed: 260°C for 10 seconds at terminals

SURFACE MOUNT AUTOMOTIVE TRANSIENT VOLTAGE SUPPRESSOR

Zener VOLTAGE -27.0 Volts  Peak Pulse Current - 130.0 Amps

FEATURES

 Ideally suited for load dump protection

 Plastic package has Underwriters Laboratory

   Flammability Classification 94V-0

 High temperature stability due to unique oxide passivation

 Exclusive patented PAR™ oxide passivated chip construction

 Integrally molded heatsink provides a very low thermal resistance for maximum heat dissipation

 Low leakage current at TJ=175°C

 Low forward VOLTAGE drop

 High temperature soldering guaranteed: 260°C for 10 seconds at terminals

SURFACE MOUNT diode Unidirectional and bidirectional TRANSIENT VOLTAGE SUPPRESSOR diodes

Pulse Power Dissipation: 400 W
Maximum Stand-off VOLTAGE: 5,5...342 V

SURFACE MOUNT unidirectional and bidirectional TRANSIENT VOLTAGE SUPPRESSOR Diodes

 • Peak pulse power dissipation               400 W
 • Nominal breakdown VOLTAGE          6.8...520 V
 • Plastic case MELF                         DO-213AB
 • Weight approx.                                      0.12 g
 • Plastic material has UL classification 94V-0
 • Standard packaging taped and reeled

SURFACE MOUNT unidirectional and bidirectional TRANSIENT VOLTAGE SUPPRESSOR Diodes

 • Pulse power dissipation                   150 W
 • Nominal breakdown VOLTAGE     6.8...200 V
 • Plastic case MiniMELF                  SOD-80
 • Weight approx.                                 0.04 g
 • Plastic material has UL classification 94V-0
 • Standard packaging taped in ammo pack see page 18

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Features

For SURFACE MOUNTed application in order to optimize board space

Low profile package 

Built-in strain relief

Glass passivated junction

Excellent clamping capability

Fast response time: Typically less than 1.0ps from 0 volt to BV min.

Typical IRless than 1μA above 10V

High temperature soldering guaranteed: 250^OC / 10 seconds at terminals

Plastic material used carries Underwriters Laboratory Flammability Classification 94V-0

600 watts peak pulse power capability with a 10 x 1000 us waveform by 0.01% duty cycle



Mechanical Data

Case: Molded plastic 

Terminals: Solder plated

Polarity: Indicated by cathode band

Standard packaging: 12mm tape (EIA STD RS-481)

Weight: 0.093gram

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
VOLTAGE-5.0 TO 440 Volts 400 Watt Peak Pulse Power

FEATURES
• For SURFACE MOUNTed applications in order to optimize board space
• Low profile package
• Built-in strain relief
• Glass passivated junction
• Low inductance
• Excellent clamping capability
• Repetition rate (duty cycle):0.01%
• Fast response time: typically less than 1.0 ps from 0 volts to BV for unidirectional types
• Typical IR less than 1µA above 10V
• High temperature soldering: 250°C/10 seconds at terminals
• Plastic package has Underwriters Laboratory
  Flammability Classification 94 V-O

FEATURES
♦ Ideally suited for load dump protection
♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0
♦ High temperature stability due to unique oxide passivation
♦ Exclusive patented PARª oxide passivated chip construction
♦ Integrally molded heatsink provides a very low thermal resistance for maximum heat dissipation
♦ Low leakage current at TJ=175°C
♦ Low forward VOLTAGE drop
♦ High temperature soldering guaranteed: 260°CC for 10 seconds at terminals

DESCRIPTION:
The CENTRAL SEMICONDUCTOR 1SMC5.0A Series types are SURFACE MOUNT Uni-Directional Glass Passivated Junction TRANSIENT VOLTAGE SUPPRESSORs designed to protect VOLTAGE sensitive components from high VOLTAGE TRANSIENTs.

THIS DEVICE IS MANUFACTURED WITH A GLASS PASSIVATED CHIP FOR OPTIMUM RELIABILITY.
Note: For Bi-directional devices, please refer to the 1SMC5.0CA Series data sheet.

MARKING CODE: SEE ELECTRICAL CHARACTERISTICS TABLE

DESCRIPTION:
The CENTRAL SEMICONDUCTOR 3SMC5.0A Series types are SURFACE MOUNT Uni-Directional Glass Passivated Junction TRANSIENT VOLTAGE SUPPRESSORs designed to protect VOLTAGE sensitive components from high VOLTAGE TRANSIENTs.

THIS DEVICE IS MANUFACTURED WITH A GLASS PASSIVATED CHIP FOR OPTIMUM RELIABILITY.
Note: For Bi-directional devices, please refer to the 3SMC5.0CA Series data sheet.

MARKING CODE: SEE ELECTRICAL CHARACTERISTICS TABLE