Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

P/N + Description + Content Search

Search Word's :

Part Name(s) : CD4051BC CD4051BCM CD4053 CD4051BCMTC CD4051BCMTCX CD4051BCMX CD4051BCN CD4051BCNX CD4051BCSJ CD4051BCSJX Fairchild
Fairchild Semiconductor
Description : Single 8-Channel Analog Multiplexer/Demultiplexer,Dual 4-Channel Analog Multiplexer/Demultiplexer,Triple 2-Channel Analog Multiplexer/Demultiplexer View

General Description
The CD4051BC, CD4052BC, and CD4053BC Analog multiplexers/demultiplexers are digitally controlled Analog switches having low “ON” impedance and very low “OFF” leakage currents. Control of Analog signals up to 15V p-p can be achieved by digital signal amplitudes of 3−15V. For example, if VDD =5V, VSS =0V and VEE = −5V, Analog signals from −5V to +5V can be controlled by digital inputs of 0−5V. The multiplexer circuits dissipate extremely low quiescent power over the full VDD−VSS and VDD−VEE supply voltage ranges, independent of the logic state of the control signals. When a logical “1” is present at the inhibit input terminal all channels are “OFF”.

Features
■ Wide range of digital and Analog signal levels:
   digital 3 – 15V, Analog to 15Vp-p
■ Low “ON” resistance: 80Ω(typ.) over entire 15Vp-p
   signal-input range for VDD −VEE =15V
■ High “OFF” resistance:
   channel leakage of ±10 pA (typ.) at VDD −VEE =10V
■ Logic level conversion for digital addressing signals of
   3 – 15V (VDD −VSS =3 – 15V) to switch Analog signa
   to 15 Vp-p(VDD −VEE =15V)
■ Matched switch characteristics:
   ∆RON =5Ω(typ.) for VDD −VEE =15V
■ Very low quiescent power dissipation under all
   digital-control input and supply conditions:
   1 µW (typ.) at VDD −VSS =VDD −VEE =10V
■ Binary address decoding on chip

Part Name(s) : CD4052BCCW CD4052BCW CD4051BCCW CD4053BCCW CD4051BCW CD4053BCW Fairchild
Fairchild Semiconductor
Description : Single 8-Channel Analog Multiplexer/DemultiplexerDual 4-Channel Analog Multiplexer/DemultiplexerTriple 2-Channel Analog Multiplexer/Demultiplexer View

General Description
The CD4051BC, CD4052BC, and CD4053BC Analog multiplexers/demultiplexers are digitally controlled Analog switches having low “ON” impedance and very low “OFF” leakage currents.
   
Features
■ Wide range of digital and Analog signal levels:
    digital 3 – 15V, Analog to 15Vp-p
■ Low “ON” resistance: 80Ω (typ.) over entire 15Vp-p
    signal-input range for VDD − VEE = 15V
■ High “OFF” resistance:
    channel leakage of ±10 pA (typ.) at VDD − VEE = 10V
■ Logic level conversion for digital addressing signals of
    3 – 15V (VDD − VSS = 3 – 15V) to switch Analog signals
    to 15 V
    p-p (VDD − VEE = 15V)
■ Matched switch characteristics:
    ∆RON = 5Ω (typ.) for VDD − VEE = 15V
■ Very low quiescent power dissipation under all
    digital-control input and supply conditions:
    1 µ W (typ.) at VDD − VSS = VDD − VEE = 10V
■ Binary address decoding on chip
   

Part Name(s) : HEF4052B HEF4052BP HEF4052BT HEF4052BTT NXP
NXP Semiconductors.
Description : Dual 4-Channel Analog Multiplexer/Demultiplexer View

General description

The HEF4052B is a Dual 4-Channel Analog Multiplexer/Demultiplexer with common channel select logic. Each Multiplexer/Demultiplexer has four independent inputs/outputs (nY0 to nY3) and a common input/output (nZ). The common channel select logic includes two select inputs (S1 and S2) and an active LOW enable input (E). Both multiplexers/demultiplexers contain four bidirectional Analog switches, each with one side connected to an independent input/output (nY0 to nY3) and the other side connected to a common input/output (nZ).



Features and benefits

■ Fully static operation

■ 5 V, 10 V, and 15 V parametric ratings

■ Standardized symmetrical output characteristics

■ Specified from 40 C to +85 C and 40 C to +125 C

■ Complies with JEDEC standard JESD 13-B



Applications

Analog multiplexing and demultiplexing

■ Digital multiplexing and demultiplexing

■ Signal gating



 


Part Name(s) : HD14051B Hitachi
Hitachi -> Renesas Electronics
Description : 8-Channel Analog Multiplexer/Demultiplexer View

8-Channel Analog Multiplexer/Demultiplexer


Part Name(s) : HEF4052B HEF4052BD HEF4052BDB HEF4052BF HEF4052BN HEF4052BP HEF4052BPB HEF4052BT HEF4052BU Philips
Philips Electronics
Description : Dual 4-Channel Analogue Multiplexer/Demultiplexer View

DESCRIPTION

The HEF4052B is a Dual 4-Channel Analogue Multiplexer/Demultiplexer with common channel select logic. Each Multiplexer/Demultiplexer has four independent inputs/outputs (Y0 to Y3) and a common input/output (Z). The common channel select logic includes two address inputs (A0 and A1) and an active LOW enable input(E).

Both multiplexers/demultiplexers contain four bidirectional Analogue switches, each with one side connected to an independent input/output (Y0 to Y3) and the other side connected to a common input/output (Z).



 


Part Name(s) : 74HC4053 74HCT4053 74HC4053N 74HCT4053N 74HC4053D 74HCT4053D 74HC4053DB 74HCT4053DB 74HC4053PW 74HCT4053PW NXP
NXP Semiconductors.
Description : Triple 2-Channel Analog Multiplexer/Demultiplexer View

General description

The 74HC4053; 74HCT4053 is a high-speed Si-gate CMOS device and is pin compatible with the HEF4053B. It is specified in compliance with JEDEC standard no. 7A.

The 74HC4053; 74HCT4053 is Triple 2-Channel Analog Multiplexer/Demultiplexer with a common enable input (E). Each Multiplexer/Demultiplexer has two independent inputs/outputs (nY0 and nY1), a common input/output (nZ) and three digital select inputs (Sn). With E LOW, one of the two switches is selected (low-impedance ON-state) by S1 to S3. With E HIGH, all switches are in the high-impedance OFF-state, independent of S1 to S3.

VCC and GND are the supply voltage pins for the digital control inputs (S0 to S2, and E). The VCC to GND ranges are 2.0 V to 10.0 V for 74HC4053 and 4.5 V to 5.5 V for 74HCT4053. The Analog inputs/outputs (nY0 to nY1, and nZ) can swing between VCC as a positive limit and VEE as a negative limit. VCC  VEE may not exceed 10.0 V.

For operation as a digital Multiplexer/Demultiplexer, VEE is connected to GND (typically ground).



Features and benefits

■ Wide Analog input voltage range from 5 V to +5 V

■ Low ON resistance:

♦ 80 Ω (typical) at VCC - VEE = 4.5 V

♦ 70 Ω (typical) at VCC - VEE = 6.0 V

♦ 60 Ω (typical) at VCC - VEE = 9.0 V

■ Logic level translation: to enable 5 V logic to communicate with ±5 V Analog signals

■ Typical ‘break before make’ built-in

■ ESD protection:

♦ HBM JESD22-A114F exceeds 2000 V

♦ MM JESD22-A115-A exceeds 200 V

♦ CDM JESD22-C101E exceeds 1000 V

■ Multiple package options

■ Specified from 40°C to +85°C and 40°C to +125°C



Applications

Analog multiplexing and demultiplexing

■ Digital multiplexing and demultiplexing

■ Signal gating



 


Part Name(s) : M74HC4053 M74HC4053B1R M74HC4053M1R M74HC4053RM13TR M74HC4053TTR ST-Microelectronics
STMicroelectronics
Description : Triple 2-Channel Analog Multiplexer/Demultiplexer View

DESCRIPTION

The M74HC4053 is a Triple two-channel Analog Multiplexer/Demultiplexer fabricated with silicon gate C2MOS technology and it is pin to pin compatible with the equivalent metal gate CMOS4000B series. It contains 6 bidirectional and digitally controlled Analog switches.



■ LOW POWER DISSIPATION:

  ICC = 4µA(MAX.) at TA=25°C

■ LOGIC LEVEL TRANSLATION TO ENABLE

  5V LOGIC SIGNAL TO COMMUNICATE WITH ±5V Analog SIGNAL

■ LOW "ON" RESISTANCE:

  70Ω TYP. (VCC - VEE = 4.5V)

  50Ω TYP. (VCC - VEE = 9V)

■ WIDE Analog INPUT VOLTAGE RANGE: ±6V

■ FAST SWITCHING:

  tpd = 15ns (TYP.) at TA = 25 °C

■ LOW CROSSTALK BETWEEN SWITCHES

■ HIGH ON/OFF OUTPUT VOLTAGE RATIO

■ WIDE OPERATING SUPPLY VOLTAGE RANGE (VCC - VEE) = 2V TO 12V

■ LOW SINE WAVE DISTORTION:

  0.02% at VCC - VEE = 9V

■ HIGH NOISE IMMUNITY:

  VNIH = VNIL = 28% VCC (MIN.)

■ PIN AND FUNCTION COMPATIBLE WITH 74 SERIES 4053



 


Part Name(s) : M54HC4051 M54HC4051D M54HC4051D1 M54HC4051K M54HC4051K1 ST-Microelectronics
STMicroelectronics
Description : RAD-HARD Single 8-Channel Analog Multiplexer/Demultiplexer View

DESCRIPTION

The M54HC4051 is a Single eight-channel Analog Multiplexer/Demultiplexer fabricated with silicon gate C2MOS technology and it is pin to pin compatible with the equivalent metal gate CMOS4000B series.

It contains 8 bidirectional and digitally controlled Analog switches.

A built-in level shifting is included to allow an input range up to ±6V (peak) for an Analog signal with digital control signal of 0 to 6V.

VEE supply pin is provided for Analog input signals. It has an inhibit (INH) input terminal to disable all the switches when is at high level. For operation as a digital Multiplexer/Demultiplexer, VEE is connected to GND.

A, B and C control inputs select one channel out of eight.

All inputs are equipped with protection circuits against static discharge and transient excess voltage.



■ LOW POWER DISSIPATION:

   ICC = 4µA(MAX.) at TA=25°C

■ LOGIC LEVEL TRANSLATION TO ENABLE

   5V LOGIC SIGNAL TO COMMUNICATE WITH ±5V Analog SIGNAL

■ LOW "ON" RESISTANCE:

   70Ω TYP. (VCC - VEE = 4.5V)

   50Ω TYP. (VCC - VEE = 9V)

■ WIDE Analog INPUT VOLT. RANGE: ±6V

■ FAST SWITCHING:

   tpd = 15ns (TYP.) at TA = 25 °C

■ LOW CROSSTALK BETWEEN SWITCHES

■ HIGH ON/OFF OUTPUT VOLTAGE RATIO

■ WIDE OPERATING SUPPLY VOLTAGE RANGE (VCC - VEE) = 2V TO 12V

■ LOW SINE WAVE DISTORTION:

   0.02% at VCC - VEE = 9V

■ HIGH NOISE IMMUNITY:

   VNIH = VNIL = 28% VCC (MIN.)

■ PIN AND FUNCTION COMPATIBLE WITH 54 SERIES 4051

■ SPACE GRADE-1: ESA SCC QUALIFIED

■ 50 krad QUALIFIED, 100 krad AVAILABLE ON REQUEST

■ NO SEL UNDER HIGH LET HEAVY IONS IRRADIATION

■ DEVICE FULLY COMPLIANT WITH SCC-9408-064



 


Part Name(s) : M74HCT4053 M74HCT4053B1R M74HCT4053M1R M74HCT4053RM13TR M74HCT4053TTR ST-Microelectronics
STMicroelectronics
Description : Triple 2-Channel Analog Multiplexer/Demultiplexer View

DESCRIPTION

The M74HCT4053 is a Triple two-channel Analog Multiplexer/Demultiplexer fabricated with silicon gate C2MOS technology and it is pin to pin compatible with the equivalent metal gate CMOS4000B series.

It contains 6 bidirectional and digitally controlled Analog switches.

A built-in level shifting is included to allow an input range up to ±6V (peak) for an Analog signal with digital control signal of 0 to 6V.



■ LOW POWER DISSIPATION:

   ICC = 4µA (MAX.) at TA=25°C

■ LOGIC LEVEL TRANSLATION TO ENABLE TTL LOGIC SIGNAL TO COMMUNICATE WITH ±5V Analog SIGNAL

■ LOW "ON" RESISTANCE:

   70Ω TYP. (VCC - VEE = 4.5V)

   50Ω TYP. (VCC - VEE = 9V)

■ WIDE Analog INPUT VOLTAGE RANGE: ±6V

■ FAST SWITCHING:

   tpd = 13ns (TYP.) at TA = 25 °C

■ LOW CROSSTALK BETWEEN SWITCHES

■ HIGH ON/OFF OUTPUT VOLTAGE RATIO

■ WIDE OPERATING SUPPLY VOLTAGE RANGE (VCC - VEE) = 2V TO 12V

■ LOW SINE WAVE DISTORTION:

   0.02% at VCC - VEE = 9V

■ COMPATIBLE WITH TTL OUTPUTS:

   VIH = 2V(MIN.) VIL = 0.8V (MAX.)

■ PIN AND FUNCTION COMPATIBLE WITH 74 SERIES 4053



 


12345678910 Next



All Rights Reserved© datasheetq.com 2015 - 2019  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]