Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

P/N + Description + Content Search

Search Word's :

Part Name(s) : UPB-12/2.1-Q12 UPB-12/2.5Q48 UPB-12/3-D24 UPB-12/3.3-D48 UPB-15/1.7-Q12 UPB-15/2-Q48 UPB-15/2.5-D24 UPB-15/2.65-D48 UPB-5/5-Q12 UPB-5/6-Q48 Datel
DATEL Data Acquisition products
Description : Single Output UPB Models High-Efficiency, Smaller-Package 25 - 40Watt, DC/DC Converter View
Part Name(s) : UMP-5/5-Q12 UMP-5/6-Q48 UMP-5/7-D24 UMP-5/8-D48 UMP-12/2.1-Q12 UMP-12/2.5-Q48 UMP-12/3-D24 UMP-12/3.3-D48 UMP-15/1.7-Q12 UMP-15/2-Q48 Datel
DATEL Data Acquisition products
Description : High-Efficiency, Smaller-Package 25-40 Watt, DC/DC Converters View

DATEL’s new UMP Models are fully potted, 25-40 Watt DC/DC Converters designed to meet UL1950 and EN60950 safety standards. The combination of the UMPs higher efficiencies and thermally conductive potting compound enables these devices to achieve higher operating temperatures without derating. The 2" x 3" UMP "footprint" conforms with the standard pinout and pin geometries of most 3" x 3" devices (a 33% space savings) while delivering as much as 60% more power (40W vs. 25W).

Features
■ Higher operating temperatures
■ Fully potted
■ Designed to meet UL1950 and
   EN60950 (basic insulation)
■ CE mark available (75V-input Models)
■ Fully isolated, 1500Vdc guaranteed
25/30/35/40W Output power
■ Standard pinout! Smaller size!
■ New 2" x 3" package fits 3" x 3" footprint
■ 5V, 12V or 15V Outputs
■ Four input voltage ranges:
   10-36V, 18-36V
   18-75V, 36-75V
■ High efficiency (to 85%)
■ Input under and overvoltage lockout
■ VOUT trim and on/off control
■ Modifications and customs for OEMs

Part Name(s) : BMP-5/4-Q12 BMP-5/4-D24 BMP-5/4-Q48 BMP-5/4-D48 BMP-12/1.65-Q12 BMP-12/1.65-D24 BMP-12/1.65-Q48 BMP-12/1.65-D48 BMP-15/1.3-Q12 BMP-15/1.3-D24 Datel
DATEL Data Acquisition products
Description : High-Efficiency, Smaller-Package 25-40 Watt, DC/DC Converters View

Dual Output BMP Models

DATEL’s BMP Models are fully potted, 25-40 Watt, dual-Output DC/DC Converters designed to meet UL1950 and EN60950 safety standards. The combination the BMP’s higher efficiencies and thermally conductive potting compound enables these devices to achieve higher operating temperatures without derating. The 2" x 3" BMP "footprint" conforms to the standard pinout and pin geometries of most 3" x 3" devices (a 33% space savings) while delivering 60% more power (40W vs. 25W).

Features
■ Higher operating temperatures
■ Fully potted
■ Designed to meet UL1950 and EN60950 (basic insulation)
■ CEmark available (75V-input Models)
■ Fully isolated, 1500Vdc guaranteed
25/30/35/40W Output power
■ Standard pinout! Smaller size!
■ New 2" x 3" package fits 3" x 3" footprint
■ ±5V, ±12V or ±15V Outputs
■ Four input voltage ranges: 10-36V, 18-36V 18-75V, 36-75V
■ High efficiencies (to 88%)
■ Fully I/O protected
■ VOUT trim and on/off control
■ Modifications and customs for OEM’s

Part Name(s) : UPB-12/2.5-Q48 Datel
DATEL Data Acquisition products
Description : 12V 25-40W, Single Output DC/DC Converter View

Part Name(s) : TMP-5 TMP-5/5-12/1-D24-C TMP-5/5-12/1-D48 TMP-5/5-12/1-D48-C TMP-5/5-12/1-Q12-C TMP-5/5-12/1-Q48-C TMP-5/5-15/1-D24-C TMP-5/5-15/1-D48 TMP-5/5-15/1-D48-C TMP-5/5-15/1-Q12-C Murata-ps
Murata Power Solutions
Description : Triple Output, High-Effi ciency, Smaller-Package, 25-40 Watt, DC/DC Converters View

Murata Power Solutions’ TMP Models are fully potted, 25-40 Watt, triple-Output DC/DC Converters designed to meet UL 60950-1 and EN60950-1 safety standards. The TMP’s higher effi ciencies and thermally conductive potting compound enable these devices to achieve higher operating temperatures without derating. The 2" x 3" TMP "footprint" conforms to the standard pinout and pin geometries of most 3" x 3" devices (a 33% space savings) while delivering 60% more power (40W vs. 25W).



Applicable to a wide range of telecom, computer and other OEM applications, TMP Model DC/DC’s offer +5V and ±12V or +5V and ±15V Outputs. They operate from four different input voltage ranges with total available Output power being a function of the selected range. "Q12" Models operate from 10-36V and deliver 25W. "Q48" Models operate from 18-75V and deliver 30W. For "D24" and "D48" Models, the input ranges and Output powers are 18-36V at 35W and 36-75V at 40W, respectively.



TMP's employ corrosion-resistant metal cases with plastic headers. Heat-generating ransformer cores and power semiconductors are mounted to the cases, which have threaded inserts for add-on heat sinks. All devices feature input pi fi lters, input overvoltage shutdown, Output overvoltage protection, Output current limiting, and thermal shutdown.


Part Name(s) : LT1300 LT1300CN8 LT1300CS8 Linear
Linear Technology
Description : Micropower High Efficiency 3.3/5V Step-Up DC/DC Converter View

DESCRIPTION
The LT1300 is a micropower step-up DC/DC Converter that
utilizes Burst Mode™ operation. The device can deliver 5V
or 3.3V from a two-cell battery input. It features programmable 5V or 3.3V Output via a logic-controlled input, no
load quiescent current of 120µA and a shutdown pin which
reduces supply current to 10µA. The on-chip power switch
has a low 170mV saturation voltage at a switch current of
1A, a four-fold reduction over prior designs. A 155kHz
internal oscillator allows the use of extremely small surface mount inductors and capacitors. Operation is guaranteed at 1.8V input. This allows more energy to be extracted
from the battery increasing operating life. The ILIM pin can
be used to program peak switch current with a Single
resistor allowing the use of less expensive and smaller
inductors and capacitors in lighter load applications. The
LT1300 is available in an 8-lead SOIC package, minimizing
board space requirements. For a 5V/12V Selectable Output Converter see the LT1301. For increased Output current see the LT1302.

FEATURES
■ Up to 220mA Output Current at 5V from 2V Supply
■ Supply Voltage as Low as 1.8V
■ Up to 88% Efficiency
■ Small Inductor –10µH
■ 120µA Quiescent Current
■ Shutdown to 10µA
■ Programmable 3.3V or 5V Output
■ ILIM Pin Programs Peak Switch Current
■ Low VCESAT Switch: 170mV at 1A Typical
■ Uses Inexpensive Surface Mount Inductors
■ 8-Lead DIP or SOIC Package

APPLICATIOUNS
■ Palmtop Computers
■ Portable Instruments
■ Bar-Code Scanners
DC/DC Converter Module Replacements
■ Battery Backup Supplies
■ Personal Digital Assistants
■ PCMCIA Cards

Part Name(s) : RQD-0505/0.25 RQD-0509/0.25 RQD-051.8/0.25 RQD-0512/0.25 RQD-0515/0.25 RQD-0524/0.25 RQD-053.3/0.25 RQD-0905/0.25 RQD-0909/0.25 RQD-091.8/0.25 Recom
RECOM Electronic GmbH
Description : ECONOLINE - DC/DC-Converter RQS / RQD Series, 0.25 Watt, SMD (Single & Dual Output) View

ECONOLINE - DC/DC-Converter RQS / RQD Series, 0.25 Watt, SMD (Single & Dual Output)



Features

● 1kVDC Isolation

● Efficiency to73%

● UL 94V-0 Package Material

● Toroidal Magnetics

● Internal SMD Construction


Part Name(s) : MD1322F MD1332F Shindengen
Shindengen
Description : High-Efficiency Step Down DC-DC Converter Power Integrated Circuit View

DESCRIPTION

The MD1322F is a high-efficiency step down DC-DC Converter power integrated circuit with main MOSFET switch and Schottky Barrier Diode. The MD1322F can deliver 7.5 watts maximum (5V, 3.0A) with high efficiency over a wide input voltage range. This device has Output voltage digitally selectable from 2.5V to 12V. With the MD1322F you can construct a complete DC-DC Converter

using only a few external components. Featuring an HSOP 28-pin surface mount package, the MD1322F allows you to incorporate a very small and thin power supply on your circuit board.



FEATURES

■ High efficiency

■ Wide input voltage load range

8VDC to 30VDC

Up to 3ADC

Output voltage selectable function 2.5V to 12V

■ Internal Switching power device

Main MOSFET for switch

SBD for rectification

■ Fixed 250kHz PWM frequency Without external resistor and capacitor

■ Overcurrent protection

■ Thermal shutdown function


Part Name(s) : BWR-5/3-3.3/4.25-D12A BWR-5/3-3.3/4.25-D12A-C BWR-5/3-3.3/4.25-D12A-C-C BWR-5/3-3.3/4.25-D12A-Y BWR-5/3-3.3/4.25-D12A-Y-C BWR-5/3-3.3/4.25-D12AL1 BWR-5/3-3.3/4.25-D12AL1-C BWR-5/3-3.3/4.25-D12AL2 BWR-5/3-3.3/4.25-D12AL2-C BWR-5/3-3.3/4.25-D12AN Murata-ps
Murata Power Solutions
Description : Dual Output BWR Models Mixed Voltage, 5V and 3.3V, Independent Dual Output 30 Watt DC/DC Converters View

Murata Power Solutions' BWR series of DC/DC Converters now includes two independent Converters in one 2" x 2" package. The BWR-5/3-3.3/4.25 family provides both 5V at 3 Amps and 3.3V at 4.25 Amps for a combined Output power of 30 Watts from input ranges of 10V to 18V (-D12A), 18 to 36V (-D24A), or 36 to 75V (-D48A).



FEATURES

Independently regulated 5V/3.3V Outputs

5V @ 3A/3.3V @ 4.25A simultaneously delivered

Independent VOUT Trim pins for margining

Independent On/Off Control pins

88% efficiency; 75mV ripple/noise

Input ranges: 10-18V, 18-36V or 36-75V

UL 1950 and EN60950-1 safety approvals

Fully isolated, 1500Vdc guaranteed

Input under and overvoltage shutdown

Independent OVP; short circuit protection

Thermal shutdown


12345678910 Next



All Rights Reserved© datasheetq.com 2015 - 2020  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]