Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

P/N + Description + Content Search

Search Word's :

Part Name(s) : LMV931 LMV932 LMV931SQ3T2G LMV931SN3T1G LMV932DMR2G ON-Semiconductor
ON Semiconductor
Description : Single and Dual Low Voltage, Rail-to-Rail Input and Output, Operational Amplifiers View

The LMV931 Single and LMV932 Dual are CMOS Low−voltage Operational Amplifiers which can operate on Single−sided power supplies (1.8 V to 5.0 V) with rail−to−rail Input and output swing. Both devices come in small state−of−the−art packages and require very Low quiescent current making them ideal for battery−operated, portable applications such as notebook computers and hand−held instruments. Rail−to−Rail operation provides improved signal−to−noise performance plus the small packages alLow for closer placement to signal sources thereby reducing noise pickup.
The Single LMV931 is offered in space saving SC70−5 package. The Dual LMV932 is in a Micro8. These small packages are very beneficial for crowded PCB’s.

Features
• Performance Specified on Single−Sided Power Supply: 1.8 V, 2.7 V, and 5 V
• Small Packages:
   LMV931 in a SC−70
   LMV932 in a Micro8
• No Output Crossover Distortion
• Extended Industrial Temperature Range: −40°C to +125°C
Low Quiescent Current 210 A, Max Per Channel
• No Output Phase−Reversal from Overdriven Input
• These are Pb−Free Devices

Typical Applications
• Notebook Computers, Portable Battery−Operated Instruments, PDA’s
• Active Filters, Low−Side Current Monitoring

Part Name(s) : TLV2460Y TLV2461Y TLV2462Y TLV2463Y TLV2464Y TLV2465Y TLV2464CNR TLV2464INR TI
Texas Instruments
Description : FAMILY OF Low-POWER Rail-to-Rail Input/OUTPUT Operational Amplifiers WITH SHUTDOWN View

description
The TLV246x is a family of Low-power Rail-to-Rail Input/output Operational Amplifiers specifically designed for portable applications. The Input common-mode voltage range extends beyond the supply rails for maximum dynamic range in Low-voltage systems. The amplifier output has Rail-to-Rail performance with high-output-drive capability, solving one of the limitations of older Rail-to-Rail Input/output Operational Amplifiers. This Rail-to-Rail dynamic range and high output drive make the TLV246x ideal for buffering analog-to-digital converters.

Input Common-Mode Range Exceeds Both Supply Rails . . . – 0.2V to VDD+ + 0.2V
● Gain Bandwidth Product . . . 6.4MHz
● Supply Current . . . 500µA/channel
Input Offset Voltage . . . 100 µV
Input Noise Voltage . . . 11nV/√Hz
Rail-to-Rail Output Swing
● Slew Rate . . . 1.6 V/µs
● ±90mA Output Drive Capability
● Micropower Shutdown Mode (TLV2460/3/5) . . . 0.3 µA/channel
● Available in 5- or 6-pin SOT23 and 8- or 10-Pin MSOP
● Characterized From TA = –40°C to 125°C
● Universal Op Amp EVM

Part Name(s) : TLV2460A-Q1 TLV2460AQDRQ1 TLV2460AQPWRQ1 TLV2460QDRQ1 TLV2460QPWRQ1 TLV2461A-Q1 TLV2461AQDRQ1 TLV2461AQPWRQ1 TLV2461QDRQ1 TLV2461QPWRQ1 TI
Texas Instruments
Description : FAMILY OF Low-POWER Rail-to-Rail Input/OUTPUT Operational Amplifiers WITH SHUTDOWN View

description

The TLV246x is a family of Low-power Rail-to-Rail Input/output Operational Amplifiers specifically designed for portable applications. The Input common-mode voltage range extends beyond the supply rails for maximum dynamic range in Low-voltage systems. The amplifier output has Rail-to-Rail performance with high-output-drive capability, solving one of the limitations of older Rail-to-Rail Input/output Operational Amplifiers. This Rail-to-Rail dynamic range and high output drive make the TLV246x ideal for buffering analog-to-digital converters.



 


Part Name(s) : LMV321 LMV321SN3T1G LMV321SQ3T2G LMV324 LMV324DR2G LMV324DTBR2G LMV358 LMV358DMR2G LMV358DR2G LMV358MUTAG ON-Semiconductor
ON Semiconductor
Description : Single, Dual, Quad Low-Voltage, Rail-to-Rail Operational Amplifiers View

The LMV321, LMV358, and LMV324 are CMOS Single, Dual, and quad Low voltage Operational Amplifiers with rail−to−rail output swing. These Amplifiers are a cost−effective solution for applications where Low power consumption and space saving packages are critical. Specification tables are provided for operation from power supply voltages at 2.7 V and 5 V. Rail−to−Rail operation provides improved signal−to−noise preformance. Ultra Low quiescent current makes this series of Amplifiers ideal for portable, battery operated equipment. The common mode Input range includes ground making the device useful for Low−side current−shunt measurements. The ultra small packages alLow for placement on the PCB in close proximity to the signal source thereby reducing noise pickup.



Features

• Operation from 2.7 V to 5.0 V Single−Sided Power Supply

• LMV321 Single Available in Ultra Small 5 Pin SC70 Package

• No Output Crossover Distortion

• Industrial temperature Range: −40°C to +85°C

• Rail−to−Rail Output

Low Quiescent Current: LMV358 Dual − 220 A, Max per Channel

• No Output Phase−Reversal from Overdriven Input

• These are Pb−Free Devices



Typical Applications

• Notebook Computers and PDA’s

• Portable Battery−Operated Instruments

• Active Filters



Part Name(s) : AD8571ARMZ AD8574ARZ ADI
Analog Devices
Description : Zero-Drift, Single-Supply, Rail-to-Rail Input/Output Operational Amplifiers View

GENERAL DESCRIPTION
This family of Amplifiers has ultraLow offset, drift, and bias current. The AD8571, AD8572, and AD8574 are Single, Dual, and quad Amplifiers, respectively, featuring Rail-to-Rail Input and output swings. All are guaranteed to operate from 2.7 V to 5 V Single supply.
The AD857x family provides benefits previously found only in expensive auto-zeroing or chopper-stabilized Amplifiers. Using Analog Devices, Inc., topology, these zero-drift Amplifiers combine Low cost with high accuracy. (No external capacitors are required.) Using a patented spread-spectrum, auto-zero technique, the AD857x family eliminates the intermodulation effects from interaction of the chopping function with the signal frequency in ac applications.

FEATURES
   Low offset voltage: 1 μV
   Input offset drift: 0.005 μV/°C
   Rail-to-Rail Input and output swing
   5 V/2.7 V Single-supply operation
   High gain: 145 dB typical
   CMRR: 140 dB typical
   PSRR: 130 dB typical
   UltraLow Input bias current: 10 pA typical
   Low supply current: 750 μA per op amp
   Overload recovery time: 50 μs
   No external capacitors required
  
APPLICATIONS
   Temperature sensors
   Pressure sensors
   Precision current sensing
   Strain gage Amplifiers
   Medical instrumentation
   Thermocouple Amplifiers

Part Name(s) : AD8571 AD8571AR AD8571ARM AD8572 AD8572AR AD8572ARU AD8574 AD8574AR AD8574ARU ETC
Unspecified
Description : Zero-Drift, Single-Supply, Rail-to-Rail Input/Output Operational Amplifiers View

GENERAL DESCRIPTION

This new family of Amplifiers has ultraLow offset, drift and bias current. The AD8571, AD8572 and AD8574 are Single, Dual and quad Amplifiers featuring Rail-to-Rail Input and output swings. All are guaranteed to operate from 2.7 V to 5 V Single supply.

The AD857x family provides the benefits previously found only in expensive autozeroing or chopper-stabilized Amplifiers. Using Analog Devices’ new topology these new zero-drift Amplifiers combine Low cost with high accuracy. (No external capacitors are required.) In addition, using a patented spread-spectrum autozero technique, the AD857x family virtually eliminates the intermodulation effects from interaction of the chopping function with the signal frequency in ac applications.



FEATURES

  Low Offset Voltage: 1 mV

  Input Offset Drift: 0.005 mV/8C

  Rail-to-Rail Input and Output Swing

  5 V/2.7 V Single-Supply Operation

  High Gain, CMRR, PSRR: 130 dB

  UltraLow Input Bias Current: 20 pA

  Low Supply Current: 750 mA/Op Amp

  Overload Recovery Time: 50 ms

  No External Capacitors Required



APPLICATIONS

  Temperature Sensors

  Pressure Sensors

  Precision Current Sensing

  Strain Gage Amplifiers

  Medical Instrumentation

  Thermocouple Amplifiers



 


Part Name(s) : LMV358QPWE4 LMV358QPWG4 TI
Texas Instruments
Description : Low-VOLTAGE Rail-to-Rail OUTPUT Operational Amplifiers View

DESCRIPTION/ORDERING INFORMATION
The LMV321, LMV358, and LMV324/LMV324S are Single, Dual, and quad Low-voltage (2.7 V to 5.5 V) Operational Amplifiers with Rail-to-Rail output swing. The LMV324S, which is a variation of the standard LMV324, includes a power-saving shutdown feature that reduces supply current to a maximum of 5 μA per channel when the Amplifiers are not needed. Channels 1 and 2 together are put in shutdown, as are channels 3 and 4. While in shutdown, the outputs actively are pulled Low.
   
FEATURES
• 2.7-V and 5-V Performance
• –40°C to 125°C Operation
Low-Power Shutdown Mode (LMV324S)
• No Crossover Distortion
Low Supply Current
    – LMV321 . . . 130 μA Typ
    – LMV358 . . . 210 μA Typ
    – LMV324 . . . 410 μA Typ
    – LMV324S . . . 410 μA Typ
Rail-to-Rail Output Swing
• ESD Protection Exceeds JESD 22
    – 2000-V Human-Body Model (A114-A)
    – 1000-V Charged-Device Model (C101)
   

Part Name(s) : OPA2343 OPA2343EA OPA2343UA OPA343 OPA343NA OPA343UA OPA4343 OPA4343EA OPA4343NA OPA4343UA BB
Burr-Brown -> Texas Instruments
Description : Single-SUPPLY, Rail-to-Rail Operational Amplifiers MicroAmplifier ™Series View

DESCRIPTION

OPA343 series Rail-to-Rail CMOS Operational Amplifiers are designed for Low cost, miniature applications. They are optimized for Low Voltage, Single supply operation. Rail-to-Rail Input/output and high speed operation make them ideal for driving sampling analog-to-digital converters. They are also well suited for general purpose and audio applications as well as providing I/V conversion at the output of D/A converters. Single, Dual, and quad versions have identical specifications for design flexibility.



FEATURES

Rail-to-Rail Input/OUTPUT

●MicroSIZE PACKAGES

●WIDE BandWIDTH: 5.5MHz

●HIGH SLEW RATE: 6V/µs

Low THD+NOISE: 0.0007% (f = 1kHz)

Low QUIESCENT CURRENT: 850µA/chan

Single, Dual, and QUAD


Part Name(s) : LMV821 LMV821SQ3T2G LMV822 LMV822DMR2G LMV822DR2G LMV824 LMV824DR2G LMV824DTBR2G ON-Semiconductor
ON Semiconductor
Description : Single, Dual, Quad Low Voltage, Rail-to-Rail Operational Amplifiers View

The LMV821, LMV822, and LMV824 are Operational Amplifiers with Low Input voltage offset and drift vs. temperature. In spite of Low quiescent current requirements these devices have 5 MHz bandwidth and 1.4 V/μs slew rate. In addition they provide rail−to−rail output swing into 600 Ω loads. The Input common−mode voltage range includes ground, and the maximum Input offset voltage is only 3.5 mV. Substantially large capacitive loads can be driven by simply adding a pullup resistor or isolation resistor.



Features

Low Offset Voltage: 3.5 mV

• Very Low Offset Drift: 1.0 μV/°C

• High Bandwidth: 5 MHz

• Rail−to−Rail Output Swing into a 600 Ω load

• Capable of driving highly capacitive loads

• These Devices are Pb−Free and are RoHS Compliant



Typical Applications

• Notebook Computers

• PDAs

• Modem Transmitter/ Receivers



 


12345678910 Next



All Rights Reserved© datasheetq.com 2015 - 2020  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]