Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

P/N + Description + Content Search

Search Word's :

Part Name(s) : ISDMICROTAD-16ME ISDMICROTAD-16MP ISDMICROTAD-16MS ISDMICROTAD-16MX ISDMICROTAD-16M ISD
Information Storage Devices
Description : Single-Chip Voice Record/Playback Device 16-Minute Duration View

GENERAL DESCRIPTION
The ISD MicroTAD-16M ChipCorder¨ Product provides high-quality, 3-volt, Single-Chip Record/Playback solutions for 16-Minute messaging applications which are ideal for telephone answering Devices (TADs). The CMOS-based Devices include an on-chip oscillator, antialiasing filter, smoothing filter, AutoMute™ feature, audio amplifier, and high density, multilevel Flash storage array. The ISD MicroTAD-16M is designed to be used in a microprocessor- or microcontroller-based system.

FEATURES
Single-Chip Voice Record/Playback solution
• Single +3 volt supply
• Low-power consumption
    - Operating current: ICC Play = 15 mA (typical) ICC Rec = 25 mA (typical)
    - Standby current: 1 µA (typical)
Single-Chip Duration of 16 minutes
• 4.0 KHz sample rate
• Typical band pass filter 1.7 KHz
• High-quality, natural Voice/audio reproduction
• AutoMute feature provides background noise attenuation during periods of silence
• No algorithm development required
• Microcontroller SPI or Microwire™ Serial Interface
• Fully addressable to handle multiple messages
• Nonvolatile message storage
• Power consumption controlled by SPI or Microwire control register
• 100-year message retention (typical)
• 100K record cycles (typical)
• On-chip clock source
• Available in die form, PDIP, SOIC, and TSOP

Part Name(s) : ISD2590ER ETC
Unspecified
Description : Single-Chip, MULTIPLE-MESSAGES, Voice Record/Playback Device 60-, 75-, 90-, AND 120-SECOND Duration View

[Winbond]

GENERAL DESCRIPTION
Winbond’s ISD2500 ChipCorder® Series provide high-quality, Single-Chip, Record/Playback solutions for 60- to 120-second messaging applications. The CMOS Devices include an on-chip oscillator, microphone preamplifier, automatic gain control, antialiasing filter, smoothing filter, speaker amplifier, and high density multi-level storage array. In addition, the ISD2500 is microcontroller compatible, allowing complex messaging and addressing to be achieved. Recordings are stored into on-chip nonvolatile memory cells, providing zero-power message storage. This unique, Single-Chip solution is made possible through Winbond’s patented multilevel storage technology. Voice and audio signals are stored directly into memory in their natural form, providing high-quality, solid-state Voice reproduction.

FEATURES
• Easy-to-use Single-Chip, Voice Record/Playback solution
• High-quality, natural Voice/audio reproduction
Single-Chip with Duration of 60, 75, 90, or 120 seconds.
• Manual switch or microcontroller compatible
• Playback can be edge- or level-activated
• Directly cascadable for longer Durations
• Automatic power-down (push-button mode)
    - Standby current 1 µA (typical)
• Zero-power message storage
    - Eliminates battery backup circuits
• Fully addressable to handle multiple messages
• 100-year message retention (typical)
• 100,000 record cycles (typical)
• On-chip clock source
• Programmer support for play-only applications
• Single +5 volt power supply
• Available in die form, PDIP, SOIC and TSOP packaging
• Packaged type: leaded and lead-free
• Temperature = die (0°C to +50°C) and package (0°C to +70°C)

Part Name(s) : ISD5102 ISD5104 ISD5108 ISD5116 Winbond
Winbond
Description : Single-Chip 1 TO 16 MINUTES Duration Voice Record/Playback DeviceS WITH DIGITAL STORAGE CAPABILITY View

GENERAL DESCRIPTION

The ISD5100 ChipCorder Series provide high quality, fully integrated, Single-Chip Record/Playback solutions for 1- to 16-Minute messaging applications that are ideal for use in cellular phones, automotive communications, GPS/navigation systems and other portable products. The ISD5100 Series products are an enhancement of the ISD5000 architecture, providing: 1) the I2C serial port -address, control and Duration selection are accomplished through an I2C interface to minimize pin count (ONLY two control lines required); 2) the capability of storing digital data, in addition to analog data. This feature allows customers to store phone numbers, system configuration parameters and message address locations for message management capability; 3) Various internal circuit blocks can be individually powered-up or -down for power saving.



FEATURES

Fully-Integrated Solution

Single-Chip Voice Record/Playback solution

• Dual storage of digital and analog data

Durations

   8 to 16-Minute (ISD5116)

   4 to 8-minute (ISD5108)

   2 to 4-minute (ISD5104)

   1 to 2-minute (ISD5102)



Low Power Consumption

• +2.7 to +3.3V (VCC) Supply Voltage

• Supports 2.0V and 3.0V interface logic

• Operating Current:

   ICC Play = 15 mA (typical)

   ICC Rec = 30 mA (typical)

   ICC Feedthrough = 12 mA (typical)

• Standby Current:

   ISB = 1µA (typical)

• Most stages can be individually powered down to minimize power consumption



Enhanced Voice Features

• One or two-way conversation record

• One or two-way message playback

Voice memo record and playback

• Private call screening

• In-terminal answering machine

• Personalized outgoing message

• Private call announce while on call



Digital Memory Features

• Up to 4 Mb available (ISD5116)

• Up to 2 Mb available (ISD5108)

• Up to 1 Mb available (ISD5104)

• Up to 512Kb available (ISD5102)

• Storage of phone numbers, system configuration parameters and message address table in cellular application



Easy-to-use and Control

• No compression algorithm development required

• User-controllable sampling rates

• Programmable analog interface

• Standard & Fast mode I2C serial interface (100kHz – 400 kHz)

• Fully addressable for multiple messages



High Quality Solution

• High quality Voice and music reproduction

• Winbond’s standard 100-year message retention (typical)

• 100K record cycles (typical) for analog data

• 10K record cycles (typical) for digital data



Options

• Available in die form, TSOP and SOIC and PDIP (ISD5116 Only)

• Temperature: Commercial – Packaged (0 to +70°C) & die (0 to +50°C); Industrial (-40 to +85°C)



 


Part Name(s) : ISD4003 ETC1
Unspecified
Description : Single-Chip Voice Record/Playback Devices 4-, 5-, 6-, and 8-Minute Durations View

GENERAL DESCRIPTION

The ISD4003 ChipCorder® Products provide high quality, 3-volt, Single-Chip Record/Playback solutions for 4- to 8-minute messaging applications which are ideal for cellular phones and other portable products. The CMOS-based Devices include an on-chip oscillator, antialiasing filter, smoothing filter, AutoMute™ feature, audio amplifier, and high density, multilevel Flash storage array. The ISD4003 series is designed to be used in a micro processor- or microcontroller-based system. Address and control are accomplished through a Serial Peripheral Interface (SPI) or Microwire Serial Interface to minimize pin count.



FEATURES

Single-Chip Voice Record/Playback solution

• Single +3 volt supply

• Low-power consumption

– Operating current:

   ICC Play = 15 mA (typical)

  ICC Rec = 25 mA (typical)

– Standby current: 1 µA (typical)

Single-Chip Durations of 4, 5, 6, and 8 minutes

• High-quality, natural Voice/audio reproduction

• AutoMute feature provides background noise attenuation during periods of silence

• No algorithm development required

• Microcontroller SPI or Microwire™ Serial Interface

• Fully addressable to handle multiple messages

• Nonvolatile message storage

• Power consumption controlled by SPI or Microwire control register

• 100-year message retention (typical)

• 100K record cycles (typical)

• On-chip clock source

• Available in die form, PDIP, SOIC, TSOP, and chip scale packaging (CSP)

• Extended temperature (–20°C to + 70°C) and industrial temperature (–40°C to +85°C) versions available



Part Name(s) : ISD1400 ISD1416 ISD1416P ISD1416PI ISD1416S ISD1416SI ISD1416X ISD1416XI ISD1420 ISD1420P ISD
Information Storage Devices
Description : Single-Chip Voice Record/Playback Devices 16-and 20-Second Durations View

Single-Chip Voice Record/Playback Devices 16-and 20-Second Durations


Part Name(s) : ISD5008 ISD5008-E ISD5008-ED ISD5008-EI ISD5008-P ISD5008-PD ISD5008-PI ISD5008-S ISD5008-SD ISD5008-SI ETC
Unspecified
Description : Single-Chip, Voice RECORD / PLAYBACK Device 4-, 5-, 6- AND 8-SECOND Duration View

[Winbond]



ISD5008 PRODUCT SUMMARY

The ISD5008 ChipCorder product is a fully-inte grated, Single-Chip solution which provides seamless integration of enhanced Voice record and playback features for digital cellular phones (GSM, CDMA, TDMA, PDC, and PHS), automotive communications, GPS/navigation systems, and portable communication products. This low-power, 3-volt product enables customers to quickly and easily integrate 4 to 8 minutes of Voice storage features such as one-way and two-way (full duplex) call record, Voice memo record, and call screening/answering machine functionality.



ISD5008 FEATURES

FULLY-INTEGRATED SOLUTION

Single-Chip Voice Record/Playback solution

• Integrated sampling clock, anti-aliasing and smoothing filters, and multi-level storage array

• Integrated analog features such as automatic

   gain control (AGC), audio gating switches,

   speaker driver (23mW with 8 ohm load),

   summing amplifiers, volume control, and an

   AUX IN/AUX OUT interface (e.g., for car kits).



LOW-POWER CONSUMPTION

• Single +3 volt supply

• Operating current:

   ICC Play = 15 mA (typical)

   ICC Rec = 25 mA (typical)

   ICC Feedthru = 12 mA (typical)

• Standby current: ISB = 1 µA

• Power consumption controlled by SPI or Microwire control register

• Most stages can be individually powered down for minimum power consumption



ENHANCED Voice FEATURES

• One or two-way (full duplex) conversation record (record signal summation)

• One- or two-way (full duplex) message playback (while on a call)

Voice memo record and playback

• Private call screening

• In-terminal answering machine

• Personalized outgoing message (given caller ID information from host chip set)

• Private call announce while on call (given CIDCW information from host chip set)



EASY-TO-USE AND CONTROL

• No compression algorithm development required

• User-controllable sample rates of 8.0 kHz, 6.4 kHz, 5.3 kHz, or 4.0 kHz providing up to 8 minutes of Voice storage.

• Microcontroller SPI or Microwire™ Serial Interface

• Fully addressable to handle multiple messages in 1200 rows



HIGH QUALITY SOLUTION

• High quality Voice and music reproduction

• ISD’s standard 100-year message retention (typical)

• 100,000 record cycles (typical)



OPTIONS

• Available in die form, PDIP, SOIC, TSOP, and chip scale packaging (CSP)

• Compact µBGA chip scale package available for portable applications

• Extended temperature (-20 to +70°C) and industrial temperature (-40 to +85°C) versions available


Part Name(s) : ISD5008 ISD5008-E ISD5008-ED ISD5008-EI ISD5008-P ISD5008-PD ISD5008-PI ISD5008-S ISD5008-SD ISD5008-SI Winbond
Winbond
Description : Single-Chip, Voice RECORD / PLAYBACK Device 4-, 5-, 6- AND 8-SECOND Duration View

ISD5008 PRODUCT SUMMARY

The ISD5008 ChipCorder product is a fully-inte grated, Single-Chip solution which provides seamless integration of enhanced Voice record and playback features for digital cellular phones (GSM, CDMA, TDMA, PDC, and PHS), automotive communications, GPS/navigation systems, and portable communication products. This low-power, 3-volt product enables customers to quickly and easily integrate 4 to 8 minutes of Voice storage features such as one-way and two-way (full duplex) call record, Voice memo record, and call screening/answering machine functionality.



ISD5008 FEATURES

FULLY-INTEGRATED SOLUTION

Single-Chip Voice Record/Playback solution

• Integrated sampling clock, anti-aliasing and smoothing filters, and multi-level storage array

• Integrated analog features such as automatic

   gain control (AGC), audio gating switches,

   speaker driver (23mW with 8 ohm load),

   summing amplifiers, volume control, and an

   AUX IN/AUX OUT interface (e.g., for car kits).



LOW-POWER CONSUMPTION

• Single +3 volt supply

• Operating current:

   ICC Play = 15 mA (typical)

   ICC Rec = 25 mA (typical)

   ICC Feedthru = 12 mA (typical)

• Standby current: ISB = 1 µA

• Power consumption controlled by SPI or Microwire control register

• Most stages can be individually powered down for minimum power consumption



ENHANCED Voice FEATURES

• One or two-way (full duplex) conversation record (record signal summation)

• One- or two-way (full duplex) message playback (while on a call)

Voice memo record and playback

• Private call screening

• In-terminal answering machine

• Personalized outgoing message (given caller ID information from host chip set)

• Private call announce while on call (given CIDCW information from host chip set)



EASY-TO-USE AND CONTROL

• No compression algorithm development required

• User-controllable sample rates of 8.0 kHz, 6.4 kHz, 5.3 kHz, or 4.0 kHz providing up to 8 minutes of Voice storage.

• Microcontroller SPI or Microwire™ Serial Interface

• Fully addressable to handle multiple messages in 1200 rows



HIGH QUALITY SOLUTION

• High quality Voice and music reproduction

• ISD’s standard 100-year message retention (typical)

• 100,000 record cycles (typical)



OPTIONS

• Available in die form, PDIP, SOIC, TSOP, and chip scale packaging (CSP)

• Compact µBGA chip scale package available for portable applications

• Extended temperature (-20 to +70°C) and industrial temperature (-40 to +85°C) versions available





 


Part Name(s) : ISD1000A ISD1016A ISD1016AG ISD1016AGI ISD1016AP ISD1016API ISD1016AX ISD1020A ISD1020AG ISD1020AGI ETC
Unspecified
Description : Single-Chip Voice Record/Playback Devices 16- and 20-Second Durations View

GENERAL DESCRIPTION

Information Storage Devices’ ISD1000A Chip Corder® Series provides high-quality, Single-Chip Record/Playback solutions for 16- and 20-second messaging applications. The CMOS Devices include an on-chip oscillator, microphone pream plifier, automatic gain control, antialiasing filter, smoothing filter, and speaker amplifier. In addition, the ISD1000A Series is fully microprocessor compatible, allowing complex messaging and addressing to be achieved.



FEATURES

• Easy-to-use Single-Chip Voice Record/Play back solution

• High-quality, natural Voice/audio reproduction

• Manual switch or microcontroller compatible

  – Playback can be edge- or level activated

Single-Chip Durations of 16 and 20 seconds

• Directly cascadable for longer Durations

• Power-down mode

  –1 µA standby current (typical)

• Zero-power message storage

  – Eliminates battery backup circuits

• Fully addressable to handle multiple messages

• 100-year message retention (typical)

• 100,000 record cycles (typical)

• On-chip clock source

• No algorithm development required

• Single +5 volt supply

• Available in die form, DIP, and SOIC packaging

• Industrial temperature (-40°C to +85°C) version available


Part Name(s) : I5216 I5216-DE I5216-DP I5216-DS I5216-DX I5216-E I5216-IE I5216-IP I5216-IS I5216-IX Winbond
Winbond
Description : 8 TO 16 MINUTE Voice Record/Playback SYSTEM WITH INTEGRATED CODEC View

GENERAL DESCRIPTION

The ChipCorder I5216 is an 8 to 16 minute Voice and Data Record and Playback system with integrated Voice band CODEC. The Device works on a single 2.7V to 3.3V supply, and has fully integrated system functions, including: AGC, microphone preamplifier, speaker driver, memory and CODEC. The CODEC meets the PCM conformance specification of the G.714 recommendation. Its µ-Law and A-law compander meets the specification of the ITU-T G.711 recommendation.



FEATURES

• Single Supply 2.7 to 3.3 Volt operation

Voice and digital data record and playback system on a single chip

• Industry-leading sound quality

• Low voltage operation

• Message management

• Fully integrated system functions

• Flexible architecture

• Nonvolatile message storage

• Configurable ChipCorder sampling rates of 4 kHz, 5.3kHz, 6.4 kHz and 8kHz

• 8, 10, 12 and 16 minutes Duration

• External or internal Voice recorder clock

• I2C serial interface (400kHz)

• Configurable analog paths

• 2.2V Microphone Bias Pin

• 100 year message retention (typical)

• 100K analog record cycles (typical)

• 10K digital record cycles (typical)

• Full-duplex (not in I2S mode) single channel speech CODEC with :

    o External 13.824 MHz, 27.648 MHz, 20.48 MHz or 40.96 MHz master clock

    o I2S and PCM digital audio interface ports

    o Serial transfer data rate from 64 to 3072 Kbps

    o Short and Long frame sync formats

    o 2s complement and signed magnitude data format

    o Complete µ-Law and A-Law companding

    o Linear 14 bit ∆Σ PCM CODEC-filter for A/D and D/A converter

    o 8 kHz or 44.1 kHz – 48 kHz digital audio sampling rate options

    o Analog receive and transmit gain adjust

    o Configurable setup through the I2C interface



 


12345678910 Next



All Rights Reserved© datasheetq.com 2015 - 2020  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]