Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

P/N + Description + Content Search

Search Word's :
Fairchild
Fairchild Semiconductor
Description : SOLID STATE LED Lamps Subminiature T-1 3/4 (1.9mm)

DESCRIPTION
These Subminiature LED Lamps are intended for high volume, low cost status indication on PCBs, as well as for backlighting keyboards and switches. Choices of “Yoke”, “Z-Bend” or “GullWing” lead bends are available.

FEATURES
Subminiature package
• Low profile package
• Three lead bend options for surface mounting
• Available in tape and reel

Part Name(s) : HLMP-6505-L001L
AVAGO
Avago Technologies
Description : Subminiature LED Lamps

Description
Flat Top Package
The HLMP-Pxxx Series flat top Lamps use an untinted, non-diffused, truncated lens to provide a wide radiation pattern that is necessary for use in backlighting applications The flat top Lamps are also ideal for use as emitters in light pipe applications.

Features
Subminiature flat top package
  –  ideal for backlighting and light piping applications
Subminiature dome package
  –  diffused dome for wide viewing angle
  –  nondiffused dome for high brightness
TTL and LSTTL compatible 5 volt resistor Lamps
Available in six colors
Ideal for space limited applications
Axial leads
Available with lead configurations for surface mount and through hole PC board mounting

Gilway
Gilway Technical Lamp
Description : Subminiature Krypton Lamps with Lens-End

Subminiature Krypton Lamps with Lens-End



Subminiature Krypton Lamps with Clear-End



Subminiature Halogen Lamp



 


Description : Subminiature T-3/4 LED DIFFUSED AND CLEAR Lamps

DESCRIPTION
These T-3/4 Subminiature LED Lamps feature a square base, transfer molded package for surface mount applications. A tinted diffused or water clear epoxy lens — available in AIGaAs red, high-efficiency red, green, and yellow — produces wide-angle beam emission and sharp on/off contrast. They are available with gullwing lead bends for top mounting, as well as yoke lead bends and Z-bends for mounting to the back of a PCB.

FEATURES
Subminiature T-3/4 transfer molded
• Low package profile
• Axial leads
• Wide viewing angle
• SMT versions

QT
QT Optoelectronics => Fairchildsemi
Description : Subminiature T-3/4 LED DIFFUSED and CLEAR Lamps

DESCRIPTION
The QT Optoelectronics family of T-3/4 Subminiature LED Lamps feature a square-base, transfer molded package for surface mount applications. A tinted diffused or water clear epoxy lens —available in AIGaAs red, high-efficiency red, green, and yellow — produces wide-angle beam emission and sharp on/off contrast. The LEDs are offered with gullwing lead bends for top mounting,as well as yoke lead bends and Z-bends for mounting to the back of a PCB.

FEATURES
Subminiature T-3/4 transfer molded
■ Low package profile
■ Axial leads
■ Wide viewing angle
■ SMT versions

HP
HP => Agilent Technologies
Description : Subminiature LED Lamps

Description
Flat Top Package
The HLMP-Pxxx Series flat top Lamps use an untinted, nondiffused, truncated lens to provide a wide radiation pattern that is necessary for use in backlighting applications. The flat top Lamps are also ideal for use as emitters in light pipe applications.

Features
Subminiature flat top package
    – ideal for backlighting and light piping applications
Subminiature dome package
    – diffused dome for wide viewing angle
    – nondiffused dome for high brightness
• TTL and LSTTL compatible 5 volt resistor Lamps
• Available in six colors
• Ideal for space limited applications
• Axial leads
• Available with lead configurations for surface mount and through hole PC board mounting

Description : Subminiature SOLID STATE Lamps

Subminiature SOLID STATE Lamps

Description : Subminiature SOLID STATE Lamps

Subminiature SOLID STATE Lamps

Description : Subminiature SOLID STATE Lamps

Subminiature SOLID STATE Lamps

Description : Subminiature High Performance TS AlGaAs Red LED Lamps

Description
Flat Top Package
The HLMP-Pxxx Series flat top Lamps use an untinted, non-diffused, truncated lens to provide a wide radiation pattern that is necessary for use in backlighting applications. The flat top Lamps are also ideal for use as emitters in light pipe applications.

Dome Packages
The HLMP-Qxxx Series dome Lamps, for use as indicators, use a tinted, diffused lens to provide a wide viewing angle with high on-off contrast ratio. High brightness Lamps use an untinted, nondiffused lens to provide a high luminous inten sity within a narrow radiation pattern.

Features
Subminiature flat top package
   Ideal for backlighting and light piping applications
Subminiature dome package
   Diffused dome for wide viewing angle
   Non-diffused dome for high brightness
● Wide range of drive currents 500 A to 50 mA
● Ideal for space limited applications
● Axial leads
● Available with lead confgurations for surface mount
   and through hole PC board mounting

12345678910 Next



All Rights Reserved© datasheetq.com  [Privacy Policy ] [ Request Datasheet] [Contact Us]