Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

P/N + Description + Content Search

Search Word's :
Part Name(s) : 1.5SMC220CA
CENTRAL
Central Semiconductor Corp
Description : Surface Mount SILICON BI-DIRECTIONAL GLASS PASSIVATED JUNCTION Transient Voltage Suppressors

DESCRIPTION:
The CENTRAL SEMICONDUCTOR 1.5SMC6.8CA series devices are Surface Mount bi-directional glass passivated junction Transient Voltage Suppressors designed to protect Voltage sensitive components from high Voltage Transients.

THIS DEVICE IS MANUFACTURED WITH A GLASS PASSIVATED CHIP FOR OPTIMUM RELIABILITY

MARKING CODE: SEE ELECTRICAL CHARACTERISTICS TABLE

Description : Surface Mount Transient Voltage Suppressors

Surface Mount Transient Voltage Suppressors
Voltage RANGE 5.0 to 170 Volts 400 Watts Peak Power

FEATURES
* For Surface Mount application 1.0ps from 0 volt to BV min.
* High temperature soldering guaranteed: 260oC / 10 seconds at terminals
* Typical I  less than 1 A above 10V R m
* Fast response time: Typically less than
* Built-in strain relief
* Excellent clamping capability
* Low profile package

Part Name(s) : 1.5SMC36CA-E3/57T
ETC
Unspecified
Description : Surface Mount TRANSZORB® Transient Voltage Suppressors

[Vishay]

FEATURES
• Low profile package
• Ideal for automated placement
• Glass passivated chip junction
• Available in uni-directional and bi-directional
• 1500 W peak pulse power capability with a
    10/1000 μs waveform, repetitive rate
    (duty cycle): 0.01 %
• Excellent clamping capability
• Very fast response time
• Low incremental surge resistance
• Meets MSL level 1, per J-STD-020, LF maximum peak of
    260 °C
• AEC-Q101 qualified
• Material categorization: For definitions of compliance
    please see www.vishay.com/doc?99912
   
TYPICAL APPLICATIONS
    Use in sensitive electronics protection against Voltage
    Transients induced by inductive load switching and lighting
    on ICs, MOSFET, signal lines of sensor units for consumer,
    computer, industrial, automotive, and telecommunication.
   

Part Name(s) : SMAJ5.0A(
Vishay
Vishay Semiconductors
Description : (SMAJ Series) Surface Mount TRANSZORB® Transient Voltage Suppressors

FEATURES

• Low profile package

• Ideal for automated placement

• Glass passivated chip junction

• Available in uni-directional and bi-directional

• 400 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle): 0.01 % (300 W above 78 V)

• Excellent clamping capability

• Very fast response time

• Low incremental surge resistance

• Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C

• AEC-Q101 qualified


Description : Surface Mount TRANSZORB® Transient Voltage Suppressors

Surface Mount TRANSZORB® Transient Voltage Suppressors



FEATURES

• Low profile package

• Ideal for automated placement

• Glass passivated chip junction

• Available in uni-directional and bi-directional

• 600 W peak pulse power capability with a 10/1000 µs waveform, repetitive rate (duty cycle): 0.01 %

• Excellent clamping capability

• Very fast response time

• Low incremental surge resistance

• Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C

• Solder dip 260 °C, 40 s

• Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC



TYPICAL APPLICATIONS

    Use in sensitive electronics protection against Voltage Transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial and telecommunication.


 


Vishay
Vishay Semiconductors
Description : Surface Mount PAR® Transient Voltage Suppressors

Surface Mount PAR®Transient Voltage Suppressors

High Temperature Stability and High Reliability Conditions



FEATURES

• Junction passivation optimized design passivated anisotropic rectifier technology

•TJ= 175 °C capability suitable for high reliability and automotive requirement

• Low leakage current

• Low forward Voltage drop

• High surge capability

• Meets ISO7637-2 surge specification

• Meets MSL level 1, per J-STD-020, LF maximum peak of 245 °C

• AEC-Q101 qualified

• Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC



TYPICAL APPLICATIONS

Use in sensitive electronics protection against Voltage Transients induced by inductive load switching and lighting, especially for automotive loaddump protection application.



 


Vishay
Vishay Semiconductors
Description : Surface Mount PAR® Transient Voltage Suppressors

Surface Mount PAR® Transient Voltage Suppressors

High Temperature Stability and High Reliability Conditions



FEATURES

• Junction passivation optimized design passivated anisotropic rectifier technology

• TJ= 175 °C capability suitable for high reliability and automotive requirement

• Low leakage current

• Low forward Voltage drop

• High surge capability

• Meets ISO7637-2 surge specification

• Meets MSL level 1, per J-STD-020, LF maximum peak of 245 °C

• AEC-Q101 qualified

• Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC



TYPICAL APPLICATIONS

Use in sensitive electronics protection against Voltage Transients induced by inductive load switching and lighting, especially for automotive loaddump protection application.



 


Vishay
Vishay Semiconductors
Description : Low VF Surface Mount TRANSZORB® Transient Voltage Suppressors

FEATURES
• Uni-directional polarity only
• Peak pulse power: 600 W (10/1000 μs)
• Ideal for automated placement
• Low forward Voltage
• Meets MSL level 1, per J-STD-020, LF maximum peak of
   260 °C
• Material categorization: For definitions of compliance
   please see www.vishay.com/doc?99912

TYPICAL APPLCIATIONS
   Use in sensitive electronics protection against Voltage
   Transients induced by inductive load switching and lighting
   on ICs sensor units specifically for protecting 12 V supplied
   sensitive equipment against Transient overVoltages.

Description : Surface Mount Varistors Multilayer Transient Voltage Surge Suppressor

The AUML Series of Multilayer Transient Surge Suppressors was specifically designed to suppress the destructive Transient Voltages found in an automobile. The most common Transient condition results from large inductive energy discharges. The electronic systems in the automobile, e.g. antilock brake systems, direct ignition systems, engine control, airbag control systems, wiper motor controls, etc., are susceptible to damage from these Voltage Transients and thus require protection. The AUML Transient Suppressors have temperature independent suppression characteristics affording protection from -55oC to 125oC

Features
• Load Dump Energy Rated per SAE Specification J1113
• Leadless, Surface Mount Chip Form
• “Zero” Lead Inductance
• Variety of Energy Ratings Available
• No Temperature Derating up to 125°C Ambient
• High Peak Surge Current Capability
• Low Profile, Compact Industry Standard Chip Size; (1206, 1210,
   1812 and 2220 Sizes)
• Inherent Bidirectional Clamping
• No Plastic or Epoxy Packaging Assures Better than 94V-0
   Flammability Rating

Part Name(s) : 1N6102
NJSEMI
New Jersey Semiconductor
Description : 500W BI-POLARITY Transient Voltage Suppressors

500W BI-POLARITY Transient Voltage Suppressors

12345678910 Next



All Rights Reserved© datasheetq.com  [Privacy Policy ] [ Request Datasheet] [Contact Us]