Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

P/N + Description + Content Search

Search Word's :

Part Name(s) : SMLJ36CE3/TR13 Microsemi
Microsemi Corporation
Description : ESD Suppressors / TVS Diodes Transient Voltage Suppressor View

ESD Suppressors / TVS Diodes Transient Voltage Suppressor

Part Name(s) : SMAJ180A SMAJ180CA SMAJ200A SMAJ200CA SMAJ220A SMAJ220CA SMAJ250A SMAJ250CA SMAJ300A SMAJ300CA Bytes
Bytes
Description : Surface Mount Transient Voltage Suppressors View

Surface Mount Transient Voltage Suppressors
Voltage RANGE 5.0 to 170 Volts 400 Watts Peak Power

FEATURES
* For Surface Mount application 1.0ps from 0 volt to BV min.
* High temperature soldering guaranteed: 260oC / 10 seconds at terminals
* Typical I  less than 1 A above 10V R m
* Fast response time: Typically less than
* Built-in strain relief
* Excellent clamping capability
* Low profile package

Part Name(s) : SMAJ50 SMAJ50A SMAJ50CA SMAJ50C SOCAY
Socay Electornics Co., Ltd.
Description : Surface Mount Transient Voltage Suppressors (TVS) View

Description
The SMAJ series is designed specifically to protect sensitive electronic equipment from Voltage Transients induced by lightning and other Transient Voltage events.

Features
◆ For Surface Mounted applications in order to optimize board space
◆ Low leakage
◆ Uni and Bidirectional unit
◆ Glass passivated junction
◆ Low inductance
◆ Excellent clamping capability
◆ 400W Peak power capability at 10 × 1000µs waveform Repetition rate (duty cycle):0.01%
◆ Fast response time: typically less than 1.0ps from 0 Volts to VBR min
◆ Typical IR less than 5μA above 12V
◆ High Temperature soldering: 260°C/40 seconds at terminals
◆ Typical maximum temperature coefficient ΔVBR = 0.1% × VBR@25°C× ΔT
◆ Plastic package has Underwriters Laboratory Flammability 94V-0
◆ Matte tin lead–free Plated
◆ Halogen free and RoHS compliant
◆ Typical failure mode is short from over-specified Voltage or current
◆ Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c
◆ IEC-61000-4-2 ESD 15kV(Air), 8kV (Contact)
◆ ESD protection of data lines in accordance with IEC 61000-4-2 (IEC801-2)
◆ EFT protection of data lines in accordance with IEC 61000-4-4 (IEC801-4)

Applications
    TVS devices are ideal for the protection of I/O interfaces, VCC bus and other vulnerable circuits used in Telecom, Computer, Industrial and Consumer electronic applications.

Part Name(s) : SM6A27 SM6A27-E32D SM6A27HE3 SM6A27HE3/2D Vishay
Vishay Semiconductors
Description : Surface Mount PAR® Transient Voltage Suppressors View

Surface Mount PAR®Transient Voltage Suppressors

High Temperature Stability and High Reliability Conditions



FEATURES

• Junction passivation optimized design passivated anisotropic rectifier technology

•TJ= 175 °C capability suitable for high reliability and automotive requirement

• Low leakage current

• Low forward Voltage drop

• High surge capability

• Meets ISO7637-2 surge specification

• Meets MSL level 1, per J-STD-020, LF maximum peak of 245 °C

• AEC-Q101 qualified

• Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC



TYPICAL APPLICATIONS

Use in sensitive electronics protection against Voltage Transients induced by inductive load switching and lighting, especially for automotive loaddump protection application.



 



Part Name(s) : V18AUMLA1206WA V18AUMLA1206WH V18AUMLA1206WT V18AUMLA1210WA V18AUMLA1210WH V18AUMLA1210WT V18AUMLA1812WA V18AUMLA1812WH V18AUMLA1812WT V18AUMLA2220WA Littelfuse
Littelfuse, Inc
Description : Surface Mount Varistors Multilayer Transient Voltage Surge Suppressor View

The AUML Series of Multilayer Transient Surge Suppressors was specifically designed to suppress the destructive Transient Voltages found in an automobile. The most common Transient condition results from large inductive energy discharges. The electronic systems in the automobile, e.g. antilock brake systems, direct ignition systems, engine control, airbag control systems, wiper motor controls, etc., are susceptible to damage from these Voltage Transients and thus require protection. The AUML Transient Suppressors have temperature independent suppression characteristics affording protection from -55oC to 125oC

Features
• Load Dump Energy Rated per SAE Specification J1113
• Leadless, Surface Mount Chip Form
• “Zero” Lead Inductance
• Variety of Energy Ratings Available
• No Temperature Derating up to 125°C Ambient
• High Peak Surge Current Capability
• Low Profile, Compact Industry Standard Chip Size; (1206, 1210,
   1812 and 2220 Sizes)
• Inherent Bidirectional Clamping
• No Plastic or Epoxy Packaging Assures Better than 94V-0
   Flammability Rating

Part Name(s) : TPSMA10 TPSMA10A TPSMA11 TPSMA11A TPSMA12 TPSMA12A TPSMA13 TPSMA13A TPSMA15 TPSMA15A Vishay
Vishay Semiconductors
Description : Surface Mount Automotive Transient Voltage Suppressors View

Surface Mount Automotive Transient Voltage Suppressors
Breakdown Voltage 6.8 to 43.0V Peak Pulse Power 400W

Features
• Plastic package has Underwriters Laboratory Flammability Classification 94V-0
• Ideal for automated placement
• Low profile package
• Built-in strain relief
• Exclusive patented PAR® oxide passivated chip construction
• 400W peak pulse power capability with a 10/1000ms waveform, repetition rate(duty cycle): 0.01%
• Excellent clamping capability
• Low incremental surge resistance
• Very fast response time
• For devices with V(BR) ≥10V IDare typically less than 1.0mA at TA = 150°C
• Designed for under the hood Surface Mount applications
• High temperature soldering: 250°C/10 seconds at terminals

Part Name(s) : SMDJ10 SMDJ10A SMDJ10C SMDJ10CA SMDJ11 SMDJ11A SMDJ11C SMDJ11CA SMDJ12 SMDJ12A DGNJDZ
Nanjing International Group Co
Description : Surface Mount Transient Voltage Suppressors View

Surface Mount Transient Voltage Suppressors

Part Name(s) : BZW03D44 Vishay
Vishay Semiconductors
Description : Silicon Z–Diodes and Transient Voltage Suppressors View

Silicon Z–Diodes and Transient Voltage Suppressors



Features

 Glass passivated junction

 Hermetically sealed package

 Clamping sealed package



Applications

Voltage regulators and Transient suppression circuits


Part Name(s) : TVS305 TVS310 TVS312 TVS315 TVS318 TVS324 TVS328 TVS348 TVS360 TVS410 DIGITRON
Digitron Semiconductors
Description : Transient Voltage Suppressors View

Transient Voltage Suppressors

12345678910 Next



All Rights Reserved© datasheetq.com 2015 - 2019  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]