ex) KSB1366Y amplifier fairchild
The CS235 System Smoke Detector is a photo electric type with a pulsed infrared LED as the light source and a silicon photodiode as the light detector. The CS235 IC, along with passive external compo nents, controls the system timing and signal processing.
■ Synchronous Detection for High Noise Immunity
■ Pulsed Operation for Low Average Current Drain
■ System Gain Externally Set
■ System Sensitivity Externally Adjustable
■ System Operation Monitored by Means of External Red LED
M5295A is a semiconductor integrated circuit which is designed for system reset to detect +5 V power supply. This IC keeps the operation microcomputer watching. When the system is abnormal, it generates reset output until the system returns to normal states of the system. It is possible to vary the two detective voltage by connecting the resistor, so it is suitable to high uality and high performance system.
• Watchdog timer
• Power on reset timer
• Low circuit current: 0.8 mA (Typ, VCC= 5 V)
• Wide supply voltage range: VCC(max)= 15 V
• Microcomputer system
This SAW filter for the transmitting or receiving RF circuit of Global Positioning System.
1. SMD package insures small size, lightweight.
2. Adjustment free.
3. Low insertion loss and high stop band attenuation.
4. Wide and sharp passband characteristics.
5. High stability and reliability.
6. Designed for reflow solderings.
• Global Positioning System (Automobile)
• Global Positioning System (Portable equipment)
BA3920 is System power supply for radio cassete recorder system.
M5295A is a semiconductor integrated circuit which is designed for System Reset to detect +5V power supply.
This IC keeps the operation microcomputer watching. When the system is abnormal,it generates Reset output until the system returns to normal states of the System. It is possible to vary the two detective voltage by connecting the resistor,so it is suitable to high quality and high performance system.
•Watch Dog Timer
•Power on Reset Timer
•Low circuit current 0.8mA(Typ,Vcc=5V)
•Wide Range of power supply
The SMR4000 is a fiber spectral loss system that allows you to perform accurate, repeatable and fast measurements of your fiber couplers, WDM’s and speciality fibers.
It is ideally suited to your high volume test requirements within manufacturing environments.
However, various options and accessories are available that configure the system for your most
demanding R&D applications.
The LA78040 ( = D78040 ) is a vertical deflection output IC for high image quality TV and CRT displays that supports the use of a bus control system signal-processing IC.
The sawtooth waveform from the bus control system signal-processing IC can directly drive the deflection yoke (including the DC component). Color TV vertical deflection system adjustment functions can be controlled over a bus system by connecting the LA78040 to a Sanyo LA768X series or LA769XX series bus control system signal-processing IC.
Since the LA78040 provides a maximum deflection current of 1.8Ap-p, it is optimal for small and medium size CRTs.
The SL3010 is intended as a general purpose (RC-5) infrared remote control system for use where a low voltage supply and a large debounce time are expected. The device can generate 2048 different commands and utilizes a keyboard with a single pole switch for each key. The command are arranged so that 32 systems can be addressed, each system containing 64 different commands. The keyboard interconnection is illustrated by Fig.1.
· Low voltage requirement
· Single pin oscillator
· Biphase transmission technique
· Test mode facility
This IC functions in a variety of CPU systems and other logic systems to generate a reset signal and reset the system accurately during momentary interruption or lowering of power supply voltage.
It also has a built-in watchdog timer for operation diagnosis. This prevents the system from running wild by generating an intermittent reset pulse during system mis-operation.
1. Built-in watchdog timer
2. Low minimum operating voltage VCC=0.8V typ.
3. Both positive and negative logic reset output can be extracted
4. Accurate detection of drop in power supply voltage
5. Detection voltage has hysteresis
6. Few external parts 1 capacitor
7. Timer monitoring time can be varied by using an external resistor
Microcomputer system monitoring, etc.