Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

P/N + Description + Content Search

Search Word's :

Part Name(s) : TS9013 TS90135CW TS90135CY TS9013ACW TS9013ACY TS9013DCW TS9013DCY TS9013KCW TS9013KCY TS9013SCW TSC
TSC Corporation
Description : 500mA CMOS low dropout Voltage regulator View

low Power Consumption 2uA(typ) low Drop Out Voltage 0.6V



General Description

The TS9013 series is a positive voltage regulator developed utilizing CMOS technology featured very low power consumption, low dropout voltage and high output voltage accuracy. Built in low on-resistor provides low dropout voltage and large output current. A 1uF or greater can be used as an output capacitor.

The TS9013 series are prevented device failure under the worst operation condition with both thermal shuTDown and current fold-back. These series are recommended for configuring portable devices and  large current application, respectively.

This series are offered in 3-pin SOT-89 and SOT-223 package.



Features

dropout voltage typically 0.4V @Io=500mA (Vo=5V)  

Output current up to 500mA

low power consumption, 2uA(typ) @Vo=5V

Output voltage +/-2%

Internal current limit

Thermal shuTDown protection



Applications

Palmtops

Video recorders

Battery powered equipment

PC peripherals

CD-ROM, DVD ROM

Digital signal camera


Part Name(s) : RT9163 RT9163-33CG RT9163-33CGF RT9163-33CGL RT9163-33CGT RT9163-33CL RT9163-33CX RT9163-33CXL RT9163-33CZL RT9163-35CG Richtek
Richtek Technology
Description : 500mA low dropout Positive Voltage regulator View

General Description
The RT9163 is a positive low dropout regulator designed for applications requiring low dropout performance at full rated current. The device is available in fixed output voltage of 3.3V, 3.5V, and 5.0V. The RT9163 provides excellent regulation over line, load, and temperature variations.

Features
low dropout, Maximum 1.4V at 500mA
● Fast Transient Response
● ±2% Total Output Regulation
● 0.4% Line Regulation
● 0.4% Load Regulation
● TO-92, SOT-89, SOT-223, and TO-252 Packages

Applications
● 5V to 3.3V Linear regulator
low Voltage Microcontroller, DSP… etc Power Supply
● Linear regulator for LAN Card and CD-ROM

Part Name(s) : AMS2906 AMS2906-1.5 AMS2906-1.8 AMS2906-2.5 AMS2906-2.85 AMS2906-3.3 AMS2906-5.0 AMS2906CD AMS2906CD-1.5 AMS2906CD-1.8 ADIMOS
Advanced Monolithic Systems Inc
Description : 600mA low dropout VOLTAGE regulator View

GENERAL DESCRIPTION
The AMS2906 series of adjustable and fixed voltage regulators are designed to provide 600mA output current and to operate down to 1V input-to-output differential. The dropout voltage of the device is guaranteed maximum 1.3V at maximum output current, decreasing at lower load currents.

FEATURES
• Three Terminal Adjustable or Fixed Voltages* 1.5V, 1.8V, 2.5V, 2.85V, 3.3V and 5.0V
• Output Current of 600mA
• Operates Down to 1V dropout
• Line Regulation: 0.2% Max.
• Load Regulation: 0.4% Max.
• TO-252, SOT-223 and SOT-89 packages

APPLICATIONS
• High Efficiency Linear regulators
• Post regulators for Switching Supplies
• 5V to 3.3V Linear regulator
• Battery Chargers
• Sound Cards
• Power Management for Notebook
• Battery Powered Instrumentation

Part Name(s) : AMS2906CL-1.8 AMS2906CL-285 AMS2906CL AMS2906CD AMS2906 AMS2906CL-1.5 AMS2906CD-1.5 AMS2906-1.5 AMS2906CL-2.5 AMS2906CD-2.5 AMS
Advanced Monolithic Systems Inc
Description : 600mA low dropout VOLTAGE regulator View

GENERAL DESCRIPTION
The The AMS2906 series of adjustable and fixed voltage regulators are designed to provide 600mA output current and to operate down to 1V input-to-output differential. The dropout voltage of the device is guaranteed maximum 1.3V at maximum output current, decreasing at lower load currents.

FEATURES
• Three Terminal Adjustable or Fixed Voltages* 1.5V, 2.5V, 2.85V, 3.3V and 5.0V
• Output Current of 600mA
• Operates Down to 1V dropout
• Line Regulation: 0.2% Max.
• Load Regulation: 0.4% Max.
• TO-252, SOT-223 and SOT-89 packages

APPLICATIONS
• High Efficiency Linear regulators
• Post regulators for Switching Supplies
• 5V to 3.3V Linear regulator
• Battery Chargers
• Sound Cards
• Power Management for Notebook
• Battery Powered Instrumentation


Part Name(s) : AMS2905 AMS2905-1.5 AMS2905-1.8 AMS2905-2.5 AMS2905-2.85 AMS2905-3.3 AMS2905-5.0 AMS2905CD AMS2905CD-1.5 AMS2905CD-1.8 AMS
Advanced Monolithic Systems Inc
Description : 500mA low dropout VOLTAGE regulator View

GENERAL DESCRIPTION

The AMS2905 series of adjustable and fixed voltage regulators are designed to provide 500mA output current and to operate down to 1V input-to-output differential. The dropout voltage of the device is guaranteed maximum 1.3V at maximum output current, decreasing at lower load currents.

On-chip trimming adjusts the reference voltage to 1%. Current limit is also trimmed, minimizing the stress under overload conditions on both the regulator and power source circuitry.

The AMS2905 devices are pin compatible with other three-terminal regulators and are offered inthe low profile surface mount TO-252(DPAK), SOT-223 and SOT-89 packages.



FEATURES

•Three Terminal Adjustable or Fixed Voltages  1.5V, 1.8V, 2.5V, 2.85V, 3.3V and 5.0V

•Output Current of 500mA

•Operates Down to 1V dropout

•Line Regulation: 0.2% Max.

•Load Regulation: 0.4% Max.

•TO-252, SOT-223 and SOT-89 packages



APPLICATIONS

•High Efficiency Linear regulators

•Post regulators for SwitchingSupplies

•5V to 3.3V Linear regulator

•Battery Chargers

•Sound Cards

•Power Management for Notebook

•Battery Powered Instrumentation


Part Name(s) : APL5522 APL5522K APL5522KA APL5522KC-TRG APL5522KAC-TRG Anpec
Anpec Electronics
Description : Dual-Channel, 3.3V/500mA and 2.5V/500mA Linear regulator View

General Description
The APL5522 is a dual low dropout regulator with output 1 with 3.3V/0.5A and output2 with 2.5V/0.5A output capability. In order to obtain lower dropout voltage and faster transient response, which is critical for low voltage applications, the APL5522 has been optimized. VOUT1 typical dropout voltage is 550mV at 500mA loading and VOUT2 typical dropout voltage is 630mV at 500mA loading. Current limit is trimmed to ensure specified output current and controlled short-circuit current. On-chip thermal limiting provides protection against any combination of overload that would create excessive junction temperatures. The APL5522 regulator comes in a SOP-8 and SOP-8P packages.

Features
• Fixed Output Voltage :
   VOUT1=3.3V/500mA (within Maximum Power Dissipation)
   VOUT2=2.5V/500mA (within Maximum Power Dissipation)
low dropout Voltage (Defined as the Minimum
   Input/Output Voltage Difference):
   Output 1 dropout Voltage : 550mV (at 500mA)
   Output 2 dropout Voltage : 630mV (at 500mA)
• Stable with 4.7mF Output Capacitor(at VOUT1 )
   Stable with 4.7mF Output Capacitor(at VOUT2)
• No Protection Diodes Needed
• Built-In Thermal Protection
• Built-In Current-Limit Protection
• Fast transient Response
• Short Setting Time
• SOP-8 and SOP-8P Packages Available
• Lead Free and Green Devices Available
   (RoHS Compliant)

Applications
• Desktop Computer
• Networking Systems
• Optical Data Storage Systems

Part Name(s) : AMS2907CL AMS2907CD AMS2907 AMS2907CL-1.5 AMS2907CD-1.5 AMS2907-1.5 AMS2907CL-1.8 AMS2907CD-1.8 AMS2907-1.8 AMS2907CL-2.5 ADIMOS
Advanced Monolithic Systems Inc
Description : 500mA low dropout VOLTAGE regulator View

GENERAL DESCRIPTION
The AMS2907 series of adjustable and fixed voltage regulators are designed to provide 500mA output current and to operate down to 1V input-to-output differential. The dropout voltage of the device is guaranteed maximum 1.3V at maximum output current, decreasing at lower load currents.
On-chip trimming adjusts the reference voltage to 1%. Current limit is also trimmed, minimizing the stress under overload conditions on both the regulator and power source circuitry.
The AMS2907 devices are pin compatible with other three-terminal regulators and are offered in the low profile surface mount TO-252(DPAK), SOT-223 and SOT-89 packages.

FEATURES
• Three Terminal Adjustable or Fixed Voltages*
   1.5V, 1.8V, 2.5V, 2.85V, 3.3V and 5.0V
• Output Current of 500mA
• Operates Down to 1V dropout
• Line Regulation: 0.2% Max.
• Load Regulation: 0.4% Max.
• TO-252, SOT-223 and SOT-89 packages

APPLICATIONS
• High Efficiency Linear regulators
• Post regulators for Switching Supplies
• 5V to 3.3V Linear regulator
• Battery Chargers
• Sound Cards
• Power Management for Notebook
• Battery Powered Instrumentation

Part Name(s) : RT9163-33 RT9163-33G RT9163-33GG RT9163-33GGF RT9163-33GGL RT9163-33GGT RT9163-33GL RT9163-33GX RT9163-33GXL RT9163-33GZL Richtek
Richtek Technology
Description : 500mA low dropout Positive Voltage regulator View

General Description

The RT9163 is a positive low dropout regulator designed for applications requiring low dropout performance at full rated current. The device is available in fixed output voltage of 3.3V, 3.5V, and 5.0V. The RT9163 provides excellent regulation over line, load, and temperature variations.



Features

  low dropout, Maximum 1.4V at 500mA

  Fast Transient Response

  ± 2% Total Output Regulation

  0.4% Line Regulation

  0.4% Load Regulation

  TO-92, SOT-89, SOT-223, and TO-252 Packages

  RoHS Compliant and 100% Lead (Pb)-Free



Applications

  5V to 3.3V Linear regulator

  low Voltage Microcontroller, DSP,.... etc. Power Supply

  Linear regulator for LAN Card and CD-ROM



 


Part Name(s) : AIC1740 AIC1740-18CE AIC1740-18CF AIC1740-20CE AIC1740-20CF AIC1740-25CE AIC1740-25CF AIC1740-27CE AIC1740-27CF AIC1740-30CE AIC
Analog Intergrations
Description : low Output Voltage, 500mA low dropout Linear regulator View

DESCRIPTION
The AIC1740 is a 3-pin low dropout linear regulator. The superior characteristics of the AIC1740 include zero base current loss, very low dropout voltage, and 2% accuracy output voltage. Typical ground current remains approximately 65mA, from no load to maximum loading conditions. dropout voltage is exceptionally low. Output current limiting and thermal limiting are built in to provide maximal protection to the AIC1740 against fault conditions.
The AIC1740 comes in the popular SOT-223, TO-251 and TO-252 packages.

FEATURES
low dropout Voltage of 900mV at 500mA Output Current (3.0V Output Version).
• Guaranteed 500mA Output Current.
• Internal 1.5W P-MOSFET Draws no Base Current.
low Ground Current at 65mA.
• 2% Accuracy Output Voltage of 1.8V/ 2.0V/ 2.5V/ 2.7V/ 3.0V.
• Input Voltage Range up to 12V.
• Needs only 4.7mF for Stability.
• Current and Thermal Limiting.

APPLICATIONS
• Voltage regulator for CD-ROM Drivers.
• Voltage regulator for LAN Cards.
• Voltage regulator for Monitor Microprocessor.
• Voltage regulator for RAM Module.
• Wireless Communication Systems.
• Battery Powered Systems.

12345678910 Next



All Rights Reserved© datasheetq.com 2015 - 2020  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]