Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

P/N + Description + Content Search

Search Word's :

Part Name(s) : DES9157001 DES9157001AC DES9157001DGAZ SP8808 SP8808A SP8808ADG SP8808DG Mitel
Mitel Networks
Description : 3.3GHz ÷ 8 Fixed Modulus Divider View

Description

The SP8808 is one of a range of very high speed low power prescalers for professional and military applications. The device features a complementary output stage with on chip current source for the emitter follower outputs.



Features

● Very High Speed Operation 3.3GHz

● Silicon Technology for low Phase Noise (Typically better than -140dBc/Hz at 10kHz)

● Specified Over the Full Military Temperature Range

● Low Power Dissipation 345mW (typ)

● 5V Single Supply Operation

● High Input Sensitivity

● Very Wide Operating Frequency Range

● Available as DESC SMD 5962-9157001MPA


Part Name(s) : DES9157001 DES9157001AC DES9157001DGAZ SP8808 SP8808A SP8808DG ZARLINK
Zarlink Semiconductor Inc
Description : 3.3GHz ÷ Fixed Modulus Divider View

Description

The SP8808 is one of a range of very high speed low power prescalers for professional and military applications. The device features a complementary output stage with on chip current source for the emitter follower outputs.



Features

• Very High Speed Operation 3.3GHz

• Silicon Technology for low Phase Noise (Typically better than -140dBc/Hz at 10kHz)

• Specified Over the Full Military Temperature Range

• Low Power Dissipation 345mW (typ)

• 5V Single Supply Operation

• High Input Sensitivity

• Very Wide Operating Frequency Range

• Available as DESC SMD 5962-9157001MPA


Part Name(s) : SP8803 SP8803/A/DG SP8803ADG ZARLINK
Zarlink Semiconductor Inc
Description : 3.3GHZ ÷ 32 Fixed Modulus Divider View

Description
The SP8803 is one of a range of very high speed low power prescalers for professional and military applications. The device features a complementary output stage with on chip current source for the emitter follower outputs.

Features
● Very High Speed Operation 3.3GHz
● Silicon Technology for low Phase Noise (Typically better than -150dBc/Hz at 10kHz)
● Specified Over the Full Military Temperature Range
● Low Power Dissipation 390mW (typ)
● 5V Single Supply Operation
● High Input Sensitivity
● Very Wide Operating Frequency Range

Part Name(s) : DES9056701 DES9056701/AC/DGAZ DES9056701AC DES9056701ACDGAZ DES9056701DGAZ SP8804 SP8804/A/DG SP8804ADG SP8804DG SP8804A Mitel
Mitel Networks
Description : 3.3GHz ÷ 4 fixed Modulus Divider View

Description
The SP8804 is one of a range of very high speed low power prescalers for professional and military applications. The device features a complementary output stage with on chip current source for the emitter follower outputs.

Features
● Very High Speed Operation 3.3GHz
● Silicon Technology for low Phase Noise (Typically better than -140dBc/Hz at 10kHz)
● Specified Over the Full Military Temperature Range
● Low Power Dissipation 370mW (typ)
● 5V Single Supply Operation
● High Input Sensitivity
● Very Wide Operating Frequency Range
● Available as DESC SMD 5962-9056701MPA


Part Name(s) : DES9066101 DES9066101/AC/DGAZ DES9066101ACDGAZ DES9066101AC DES9066101DGAZ SP8802 SP8802/A/DG SP8802A SP8802ADG SP8802DG Mitel
Mitel Networks
Description : 3.3GHz ÷2 fixed Modulus Divider View

Description

The SP8802 is one of a range of very high speed low power prescalers for professional and military applications. The device features a complementary output stage with on chip current source for the emitter

follower outputs



Features

● Very High Speed Operation 3.3GHz

● Silicon Technology for low Phase Noise(Typically better than -140dBc/Hz at 10kHz)

● Specified Over the Full Military Temperature Range

● Low Power Dissipation 420mW (typ)

● 5V Single Supply Operation

● High Input Sensitivity

● Very Wide Operating Frequency Range

● Available as DESC SMD 5962-9066101MPA



 


Part Name(s) : T1P2701012-SP TriQuint
TriQuint Semiconductor
Description : 10 W, 12V, 500 MHz—3GHz, PowerbandTM pHEMT RF Power Transistor View

Introduction
The T1P2701012-SP is a POWERBANDTM discrete pHEMT, depletion mode, RF Power transistor designed to operate from 500MHz to 3GHz in wide-band circuits. The device has an instantaneous band-width P1dB output power of 10watts across the entire band when operated in the TriQuint wide-band test fixture. The T1P2701012-SP can also be used in narrow band applications and is rated at 15Watts P1dB at 3GHz.

Features
— Exceptional Instantaneous band-width performance from 500MHz – 3GHz
— Increased efficiency results in significant advantages
    — Smaller and lighter systems
    — Reduced system component costs
    — Reduced energy consumption
— Typical Performance ratings
    — Wide-Band 500MHz-3GHz (as tested in TriQuint Wideband Fixture)
        — 10dB gain
        — 50% Efficiency
        — 10Watt P1dB
    — Narrow Band up to 3GHz
        — 12dB gain
        — 60% efficiency
        — 15Watt P1dB

Part Name(s) : LTC5541 LTC5541IUH LTC5541IUH#PBF LTC5541IUH#TRPBF LTC5541IUHPBF LTC5541IUHTRPBF LTC5541IUH-PBF LTC5541IUH-TRPBF Linear
Linear Technology
Description : 1.3Ghz to 2.3GHz High Dynamic Range Downconverting Mixer View

DESCRIPTION
The LTC®5541 is part of a family of high dynamic range passive, high gain downconverting mixers covering the 600MHz to 4GHz frequency range.The LTC5541 is optimized for 1.3Ghz to 2.3GHz RF applications. The LO frequency must fall within the 1.4GHz to 2.0GHz range for optimum performance. A typical application is a LTE or W-CDMA receiver with a 1.7GHz to 2.2GHz RF input and low-side LO.

FEATURES
■ Conversion Gain: 7.8dB at 1950MHz
■ IIP3: 26.4dBm at 1950MHz
■ Noise Figure: 9.6dB at 1950MHz
■ 16dB NF Under +5dBm Blocking
■ High Input P1dB
■ 3.3V Supply, 630mW Power Consumption
■ Shutdown PIN
■ 50Ω Single-Ended RF and LO Inputs
■ LO Inputs 50Ω Matched when Shutdown
■ High Isolation LO Switch
■ 0dBm LO Drive Level
■ High LO-RF and LO-IF Isolation
■ Small Solution Size
■ 20-Lead (5mm × 5mm) QFN package

APPLICATIONS
■ Wireless Infrastructure Receivers
   (LTE, W-CDMA. TD-SCDMA, UMTS, GSM1800)
■ Point-to-Point Microwave Links
■ High Dynamic Range Downmixer Applications

Part Name(s) : SP8861 SP8861NA SP8861NAHP SP8861HP Mitel
Mitel Networks
Description : 1.3Ghz Low Power Single-Chip Frequency Synthesiser View

The SP8861 is a low power single chip synthesiser intended for professional radio applications, containing all the elements (apart from the loop amplifier) required to build a PLL frequency synthesis loop
The device is serially programmable by a three-wire data highway and contains three independent buffers to store one reference Divider word and two local oscillator Divider words. A digital phase detector with two charge pumps, programmable in phase and gain, are provided to improve lock-up performance. The preset operation of the charge pumps can be overwritten or the comparison frequencies switched to output ports under control of the Divider word. The dual modulus ratio and so operating range is also programmable through the same word.
A power down mode is incorporated as a battery economy feature.

FEATURES
■ Improved Digital Phase Detector Eliminates ‘Dead Band’ Effects
■ Low Operating Power, Typically 175mW
1.3Ghz Operating Frequency
■ Complete Phase Locked Loop
■ High Input Sensitivity
■ Programmed throughThree-Wire Bus
■ Wide Range of Reference Division Ratios
■ Local Storage for Two Frequency Words, giving Rapid Frequency toggling
■ Programmable Phase Detector Gain
■ Power Down Mode

Part Name(s) : SP5769 SP5769A SP5769AKG SP5769AKGMP1S SP5769AKGMP1T SP5769AKGQP1S SP5769AKGQP1T SP5769KG SP5769MP1S SP5769MP1T Mitel
Mitel Networks
Description : 3GHz I2C Bus Synthesiser View

3GHz I2C Bus Synthesiser

The SP5769 is a single chip frequency synthesiser designed for tuning systems up to 3GHz. The RF preamplifier interfaces direct with the RF programmable Divider, which is of MN1A construction so giving a step size equal to the loop comparison frequency and no prescaler phase noise degradation over the full RF operating range. The comparison frequency is obtained either from an on-chip crystal controlled oscillator, or from an external source.

Features
● Complete 3·0 GHz Single Chip System
● Optimised for Low Phase Noise, with Comparison Frequencies up to 4 MHz
● No RF Prescaler
● Selectable Reference Division Ratio
● Selectable Reference/Comparison Frequency Output
● Selectable Charge Pump Current with 10:1 Ratio
● Four Selectable I2C Addresses
● I2C Fast Mode Compliant with 3·3V and 5V Logic Levels
● Four Switching Ports
● Functional Replacement for SP5659 (except ADC)
PIN Compatible with SP5655
● Power Consumption 110mW with VCC = 5·5V, all Ports off
● ESD Protection 2kV min., MIL-STD-883B Method 3015 Cat.1 (Normal ESD handling procedures should be observed)

Applications
● Digital Satellite and Cable Tuning Systems
● Communications Systems

12345678910 Next



All Rights Reserved© datasheetq.com 2015 - 2020  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]