Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits
Part name(s)'  

P/N + Description + Content Search

Search Word's :

Part name(s)' : 05801000 05801001 05801002 05801003 05801004 05801005 05801006 05801007 05801008 05801009 05801010 05801011 05801012 05801013 05801014 05801015 05801016 05801017 05801018 05801019 05801020 05801021 05801022 05801023 05801024
Description : Z-Type® push-on wire markers
Te
TE Connectivity

Pre-Printed wire and Cable markers

Z-Type® markers are individual push-on characters used to identify wires and small cables permanently. They are designed with an expanding profile, enabling each marker to accommodate a wide range of wire/cable sizes.
Z-Type® markers are a simple, cost-effective solution for many commercial wire identification applications. The markers are supplied either straight cut or chevron cut: the chevron cut option ensures the legends remain aligned. Standard Z-Type® markers are yellow or white with black legends and can be supplied as loose pieces packed in boxes or on reels. Color coded markers are also available.

Features and benefits
■ Resistant to sea water, fuels and oils
■ 9 sizes covering wire diameters from1.5mm to 12.7mm (0.06 inches to 0.5 inches)
■ Applicator wands available for easy marker installation

View
Part name(s)' : 502570-0893 5025700893
Description : 1.10mm (.043") Pitch microSD Memory Card Connector, Normal Mount SMT, Push-Push Type
Molex
Molex Connectors

Description:
1.10mm (.043") Pitch microSD Memory Card Connector, Normal Mount SMT, Push-Push Type

View
Part name(s)' : 51103-0200 511030200
Description : 2.50mm Pitch wire-to-wire and wire-to-Board Housing, Positive Lock, 2 Circuits
Molex
Molex Connectors

General

Product Family Crimp Housings

Series 51103

Application Signal, wire-to-Board, wire-to-wire

MolexKits Yes

Product Name N/A

UPC 800754316880

Physical

Circuits (maximum) 2

Color - Resin Natural

Flammability 94V-0

Gender Female

Glow-wire Compliant No

Material - Resin Polyester

Net Weight 227.300/mg

Number of Rows 1

Packaging Type Bag

Panel Mount No

Pitch - Mating Interface 2.50mm

Stackable No

Temperature Range - Operating -40°C to +105°C


View
Part name(s)' : 0511910400 51191-0400 0511910400 51191-0400 51191-0400 0511910400
Description : 2.50mm (.098") Pitch wire-to-wire and wire-to-Board Receptacle Housing, With Guide Rails, 4 Circuits
Molex
Molex Connectors

Description: 2.50mm Pitch wire-to-wire and wire-to-Board Receptacle Housing, with Guide Rails, 4 Circuits

View

Part name(s)' : XE0204
Description : 2-wire/4-wire telephone line interface.
ETC
Unspecified

Description
The XE0204 provides a common telephone interface for networks integrating two and four-wire telephone connections. The XE0204 supplies two and four wire leased line connections, and complies with FCC Part 68 Rules for 2-wire connections to the public switched network.

Features
* Small Size 0 1.5” x 1.08” 0.42”
* FCC Part 68 Compliant
* Integral Ring Detection
* Integrated Switch Hook
* Switchable between two-wire and four-wire lines
* Integral two-to-four wire convertor
* Integrated telephone line transformers
* 1500 volt isolation barrier between the telephone line and host equipment
* Supports both dial-up and leased line applications
* Supports 14,400 BPS data transfer; V.32bis (2-wire),V.33 (4-wire)
* Operates on a single +5 Volt supply
* Standard Operating Temperature Range 0℃ to 70℃ Optional operating range, -40℃ to 85℃ available

View
Part name(s)' : TDA4700 TDA4700A TDA4718 TDA4718A
Description : Control IC for single-ended and push-pull switching-mode power supplies
Infineon
Infineon Technologies

Features
●Feed-forward control (line hum suppression)
●Symmetry inputs for push-pull converter(TDA 4700)
●Push-pull outputs
●Dynamic output current limitation
●Overvoltage protection
●Undervoltage protection
●Soft start
●Double pulse suppression

View
Part name(s)' : TDA4700 TDA4700A TDA4718 TDA4718A
Description : Control IC for Single-Ended and Push-Pull Switched-Mode Power Supplies SMPS
Siemens
Siemens AG

Features

●Feed-forward control (line hum suppression)

●Symmetry inputs for push-pull converter(TDA 4700)

●Push-pull outputs

●Dynamic output current limitation

●Overvoltage protection

●Undervoltage protection

●Soft start

●Double pulse suppression


View
Part name(s)' : UCC28089DRB UCC28089DRBR UCC28089
Description : PRIMARY-SIDE PUSH-PULL OSCILLATOR WITH DEAD-TIME CONTROL
TI
Texas Instruments

DESCRIPTION
The UCC28089 is a versatile BiCMOS controller for dc-to-dc or off-line fixed-frequency switching power supplies. The UCC28089 has dual alternating output stages in dual-alternating push-pull configuration. Both outputs switch at half the oscillator frequency using a toggle flip-flop and duty cycle is limited to less than 50%.

FEATURES
• Push-Pull Oscillator With Programmable Deadtime
• High-Current Totem-Pole Dual Output Stage Drives Push-Pull Configuration with 1-A Sink
   and 0.5-A Source Capability
• Can be Used in Push-Pull, Half-Bridge, or Full-Bridge Topologies
• Oscillator Synchronization Output
• Low Start-Up Current of 130 µA and 1.4-mA Typical Run Current
• Over-Current Shutdown
• Digitally Controlled Over-Current/Retry Feature
• Undervoltage Lockout With Hysteresis

APPLICATIONS
• High Efficiency Cascaded Converters
• Inverters
• Electronic Ballasts
• Uninterruptable Power Supplies (UPS)
• AC or DC Links

View
Part name(s)' : 321-326 324-93-164-41-002 421-426 422-91-216-41-001 423-91-216-41-001
Description : PCB connectors 2.54 mm Single row / double row / wire-wrap 1/2/3/4 level / wire-wrap solder tail
PREDIP
Precid-Dip Durtal SA

Receptacles with wire-wrap posts Interconnect receptacles with wire-wrap – solder tail combination Accept pins ∅ 0.40–0.56 mm

View
12345678910 Next



All Rights Reserved© datasheetq.com 2015 - 2019  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]