Integrated circuits, Transistor, Semiconductors Free Datasheet Search and Download Site


BCM5461

  

Datasheet

Match, Like BCM5461 BCM54610 BCM5461S
Start with BCM54610* BCM5461A* BCM5461S*
End N/A
Included N/A
View Details    
BCM5461 [10/100/1000BASE-T GIGABIT COPPER TRANSCEIVER ]

other parts : BCM5461A1KPF 

Broadcom
Broadcom Corporation

Gigabit Ethernet transceiver. The BCM5461 is optimized for low power and small footprint size to enable backplane and uplink applications. By lowering system cost and reducing power dissipation by nearly 30%, the BCM5461 enables a new class of cost-effective Gigabit Ethernet equipment, driving the delivery of Gigabit bandwidth to the desktop.
The BCM5461’s Digital Signal Processor based architecture and advanced power management techniques combine to achieve robust and low power operation over the existing CAT 5 twisted-pair wiring. The BCM5461 architecture not only meets the requirements of 802.3, 802.3u, and 802.3ab, but maintains the industry’s highest level of margin over IEEE requirements for Echo, NEXT, and FEXT. Low power is a key factor in implementing Gigabit small form factor NICs and uplinks and, at less than 700 mW per port, the BCM5461 has the industrys lowest power. For NIC applications, support for Wake on LAN enables compliance with PCI 2.2 and PC99/PC2000. Also, the BCM5461 has extremely low EMI emissions, which reduces the design constraints required to meet EMI emissions specifications.

FEATURES
• Fully-integrated 10BASE-T/100BASE-TX/1000BASE-T Gigabit Ethernet transceiver
• GMII, RGMII, RTBI, and MII MAC Interface options
• On-chip low-voltage regulators
• Fully compliant with IEEE 802.3, 802.3u, and 802.3ab standards
• 0.13µ CMOS—low power and cost
• Low power
   - Less than 700 mW per port
   - Wake on LAN support
   - Advanced power management
• Trace matched output impedance
• Line-side loopback
• Low EMI emissions
• Cable-plant diagnostic
   - Cable-plant analyzer function detects cable plant impairments
   - Link quality indication LED
   - Automatic detection and correction of wiring pair swaps, pair skew, and pair polarity
   - Automatic MDI/MDIX crossover at all speeds
• Robust CESD tolerance
• Support for jumbo packets up to 9 KB
• IEEE 1149.1 (JTAG) boundary scan
• 128-pin MQFP, 117-pin BGA, and 100-pin FBGA packages

View
BCM54610 [10/100/1000BASE-T GIGABIT COPPER TRANSCEIVER ] Broadcom
Broadcom Corporation

The BCM54610 is optimized for low power and small footprint size to enable uplink and general GbE connectivity applications. By lowering system cost and reducing power dissipation, the BCM54610 enables a new class of cost-effective GbE equipment, driving the delivery of Gigabit bandwidth to the desktop.
The BCM54610 digital signal processor-based architecture and advanced power management techniques combine to achieve robust and low power operation over the existing CAT-5 twisted-pair wiring. The BCM54610 architecture also meets the requirements of 802.3, 802.3u, and 802.3ab, but maintains the industry’s highest level of margin over IEEE requirements for Echo, NEXT, and FEXT. Low power is a key factor in implementing Gigabit small form factor NICs and uplinks, and, at less than 500 mW per port, the BCM54610 has the industrys lowest power. Additionally, the BCM54610 has extremely low EMI emissions, which reduces the design constraints required to meet EMI emissions specifications.

FEATURES
• Fully integrated 10BASE-T/100BASE-TX/1000BASE-T Gigabit Ethernet (GbE) transceiver
• RGMII MAC interface options
• On-chip low-voltage regulator
• Fully compliant with IEEE 802.3™, 802.3u, and 802.3ab standards
• 65-nm CMOS—low power and cost
• Low power
   • Less than 500 mW per port
   • Advanced power management
• Trace matched output impedance
• Line-side loopback
• Low electromagnetic interference (EMI) emissions
• Cable-plant diagnostics
   • Cable plant analyzer function detects cable plant impairments
   • Link quality indication LED
   • Automatic detection and correction of wiring pair swaps, pair skew, and pair polarity
   • Automatic MDI/MDIX crossover at all speeds
• Robust CESD tolerance
• Support for jumbo packets up to 10 KB
• IEEE 1149.1 (JTAG) boundary scan
• 48-pin MLP and 100-pin FBGA packages

View
BCM5461S [10/100/1000BASE-T GIGABIT COPPER TRANSCEIVER ]

other parts : BCM5461SA1KPF  BCM5461SA1IPFG 

Broadcom
Broadcom Corporation

The BCM5461S is a fully integrated 10/100/1000BASE-T Gigabit Ethernet transceiver optimized for low power and small footprint size to enable backplane and uplink applications. By lowering system cost and reducing power dissipation by nearly 30%, the BCM5461S enables a new class of cost-effective Gigabit Ethernet equipment, driving the delivery of Gigabit bandwidth to the desktop.
The BCM5461S’s Digital Signal Processor based architecture and advanced power management techniques combine to achieve robust and low-power operation over the existing CAT 5 twisted-pair wiring. The BCM5461S architecture also meets the requirements of 802.3, 802.3u, and 802.3ab, but maintains the industry’s highest level of margin over IEEE requirements for Echo, NEXT, and FEXT. Low power is a key factor in implementing Gigabit small form factor NICs and uplinks and, at less than 700 mW per port, the BCM5461S has the industrys lowest power requirement. For NIC applications, support for Wake on LAN enables compliance with PCI 2.2 and PC99/PC2000. Also, the BCM5461S has extremely low EMI emissions, which reduces the design constraints required to meet EMI emission specifications.

FEATURES
• Fully-integrated 10BASE-T/100BASE-TX/1000BASE-T Gigabit Ethernet transceiver
• GMII, RGMII, SGMII, SerDes, RTBI and MII MAC Interface options
• Line-side copper and fiber interfaces
• On-chip low-voltage regulators
• Fully compliant with IEEE 802.3, 802.3u, and 802.3ab standards
• 0.13µ CMOS — low power and cost
• Low power
   - Less than 700 mW per port
   - Wake on LAN support
   - Advanced power management
• Trace matched output impedance
• Line-side loopback
• Low EMI emissions
• Cable plant diagnostic
   - Cable plant analyzer function detects cable plant impairments
   - Link quality indication LED
   - Automatic detection and correction of wiring pair swaps, pair skew, and pair polarity
   - Automatic MDI/MDIX crossover at all speeds
• Robust CESD tolerance
• Support for jumbo packets up to 9 KB
• IEEE 1149.1 (JTAG) boundary scan
• 128-pin MQFP, 117-pin BGA, and 100-pin FBGA packages

View
BCM5461A1KPF [10/100/1000BASE-T GIGABIT COPPER TRANSCEIVER ]

other parts : BCM5461 

Broadcom
Broadcom Corporation

Gigabit Ethernet transceiver. The BCM5461 is optimized for low power and small footprint size to enable backplane and uplink applications. By lowering system cost and reducing power dissipation by nearly 30%, the BCM5461 enables a new class of cost-effective Gigabit Ethernet equipment, driving the delivery of Gigabit bandwidth to the desktop.
The BCM5461’s Digital Signal Processor based architecture and advanced power management techniques combine to achieve robust and low power operation over the existing CAT 5 twisted-pair wiring. The BCM5461 architecture not only meets the requirements of 802.3, 802.3u, and 802.3ab, but maintains the industry’s highest level of margin over IEEE requirements for Echo, NEXT, and FEXT. Low power is a key factor in implementing Gigabit small form factor NICs and uplinks and, at less than 700 mW per port, the BCM5461 has the industrys lowest power. For NIC applications, support for Wake on LAN enables compliance with PCI 2.2 and PC99/PC2000. Also, the BCM5461 has extremely low EMI emissions, which reduces the design constraints required to meet EMI emissions specifications.

FEATURES
• Fully-integrated 10BASE-T/100BASE-TX/1000BASE-T Gigabit Ethernet transceiver
• GMII, RGMII, RTBI, and MII MAC Interface options
• On-chip low-voltage regulators
• Fully compliant with IEEE 802.3, 802.3u, and 802.3ab standards
• 0.13µ CMOS—low power and cost
• Low power
   - Less than 700 mW per port
   - Wake on LAN support
   - Advanced power management
• Trace matched output impedance
• Line-side loopback
• Low EMI emissions
• Cable-plant diagnostic
   - Cable-plant analyzer function detects cable plant impairments
   - Link quality indication LED
   - Automatic detection and correction of wiring pair swaps, pair skew, and pair polarity
   - Automatic MDI/MDIX crossover at all speeds
• Robust CESD tolerance
• Support for jumbo packets up to 9 KB
• IEEE 1149.1 (JTAG) boundary scan
• 128-pin MQFP, 117-pin BGA, and 100-pin FBGA packages

View
BCM5461SA1KPF [10/100/1000BASE-T GIGABIT COPPER TRANSCEIVER ]

other parts : BCM5461S  BCM5461SA1IPFG 

Broadcom
Broadcom Corporation

The BCM5461S is a fully integrated 10/100/1000BASE-T Gigabit Ethernet transceiver optimized for low power and small footprint size to enable backplane and uplink applications. By lowering system cost and reducing power dissipation by nearly 30%, the BCM5461S enables a new class of cost-effective Gigabit Ethernet equipment, driving the delivery of Gigabit bandwidth to the desktop.
The BCM5461S’s Digital Signal Processor based architecture and advanced power management techniques combine to achieve robust and low-power operation over the existing CAT 5 twisted-pair wiring. The BCM5461S architecture also meets the requirements of 802.3, 802.3u, and 802.3ab, but maintains the industry’s highest level of margin over IEEE requirements for Echo, NEXT, and FEXT. Low power is a key factor in implementing Gigabit small form factor NICs and uplinks and, at less than 700 mW per port, the BCM5461S has the industrys lowest power requirement. For NIC applications, support for Wake on LAN enables compliance with PCI 2.2 and PC99/PC2000. Also, the BCM5461S has extremely low EMI emissions, which reduces the design constraints required to meet EMI emission specifications.

FEATURES
• Fully-integrated 10BASE-T/100BASE-TX/1000BASE-T Gigabit Ethernet transceiver
• GMII, RGMII, SGMII, SerDes, RTBI and MII MAC Interface options
• Line-side copper and fiber interfaces
• On-chip low-voltage regulators
• Fully compliant with IEEE 802.3, 802.3u, and 802.3ab standards
• 0.13µ CMOS — low power and cost
• Low power
   - Less than 700 mW per port
   - Wake on LAN support
   - Advanced power management
• Trace matched output impedance
• Line-side loopback
• Low EMI emissions
• Cable plant diagnostic
   - Cable plant analyzer function detects cable plant impairments
   - Link quality indication LED
   - Automatic detection and correction of wiring pair swaps, pair skew, and pair polarity
   - Automatic MDI/MDIX crossover at all speeds
• Robust CESD tolerance
• Support for jumbo packets up to 9 KB
• IEEE 1149.1 (JTAG) boundary scan
• 128-pin MQFP, 117-pin BGA, and 100-pin FBGA packages

View
BCM5461A1KPFG [Ethernet ICs 10/100/1000BASE-T SINGLE ] ETC
Unspecified
View
BCM5461A1KQMG [Ethernet ICs 10/100/1000BASE-T SINGLE ] ETC
Unspecified
View
BCM5461SA1IPFG [10/100/1000BASE-T GIGABIT COPPER TRANSCEIVER ]

other parts : BCM5461S  BCM5461SA1KPF 

Broadcom
Broadcom Corporation

The BCM5461S is a fully integrated 10/100/1000BASE-T Gigabit Ethernet transceiver optimized for low power and small footprint size to enable backplane and uplink applications. By lowering system cost and reducing power dissipation by nearly 30%, the BCM5461S enables a new class of cost-effective Gigabit Ethernet equipment, driving the delivery of Gigabit bandwidth to the desktop.
The BCM5461S’s Digital Signal Processor based architecture and advanced power management techniques combine to achieve robust and low-power operation over the existing CAT 5 twisted-pair wiring. The BCM5461S architecture also meets the requirements of 802.3, 802.3u, and 802.3ab, but maintains the industry’s highest level of margin over IEEE requirements for Echo, NEXT, and FEXT. Low power is a key factor in implementing Gigabit small form factor NICs and uplinks and, at less than 700 mW per port, the BCM5461S has the industrys lowest power requirement. For NIC applications, support for Wake on LAN enables compliance with PCI 2.2 and PC99/PC2000. Also, the BCM5461S has extremely low EMI emissions, which reduces the design constraints required to meet EMI emission specifications.

FEATURES
• Fully-integrated 10BASE-T/100BASE-TX/1000BASE-T Gigabit Ethernet transceiver
• GMII, RGMII, SGMII, SerDes, RTBI and MII MAC Interface options
• Line-side copper and fiber interfaces
• On-chip low-voltage regulators
• Fully compliant with IEEE 802.3, 802.3u, and 802.3ab standards
• 0.13µ CMOS — low power and cost
• Low power
   - Less than 700 mW per port
   - Wake on LAN support
   - Advanced power management
• Trace matched output impedance
• Line-side loopback
• Low EMI emissions
• Cable plant diagnostic
   - Cable plant analyzer function detects cable plant impairments
   - Link quality indication LED
   - Automatic detection and correction of wiring pair swaps, pair skew, and pair polarity
   - Automatic MDI/MDIX crossover at all speeds
• Robust CESD tolerance
• Support for jumbo packets up to 9 KB
• IEEE 1149.1 (JTAG) boundary scan
• 128-pin MQFP, 117-pin BGA, and 100-pin FBGA packages

View
BCM5461SA1IPFG [Ethernet ICs I-Temp Single Port 10/100/1000 ] ETC
Unspecified
View
BCM5461SA1KPFG [Ethernet ICs 10/100/1000Base-T Gigabit Ethe ] ETC
Unspecified
View
1 2
Share Link : 

HOME




Language : 한국어     日本語     русский     简体中文     español
@ 2015 - 2018  [ Home ][ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]