Integrated circuits, Transistor, Semiconductors Free Datasheet Search and Download Site

BCM5461S

  

Datasheet

Match, Like BCM5461S
Start with BCM5461S* BCM5461SA*
End N/A
Included N/A

View Details

BCM5461S [10/100/1000BASE-T GIGABIT COPPER TRANSCEIVER ]

other parts : BCM5461SA1KPF  BCM5461SA1IPFG 

Broadcom
Broadcom Corporation

The BCM5461S is a fully integrated 10/100/1000BASE-T Gigabit Ethernet transceiver optimized for low power and small footprint size to enable backplane and uplink applications. By lowering system cost and reducing power dissipation by nearly 30%, the BCM5461S enables a new class of cost-effective Gigabit Ethernet equipment, driving the delivery of Gigabit bandwidth to the desktop.
The BCM5461S’s Digital Signal Processor based architecture and advanced power management techniques combine to achieve robust and low-power operation over the existing CAT 5 twisted-pair wiring. The BCM5461S architecture also meets the requirements of 802.3, 802.3u, and 802.3ab, but maintains the industry’s highest level of margin over IEEE requirements for Echo, NEXT, and FEXT. Low power is a key factor in implementing Gigabit small form factor NICs and uplinks and, at less than 700 mW per port, the BCM5461S has the industrys lowest power requirement. For NIC applications, support for Wake on LAN enables compliance with PCI 2.2 and PC99/PC2000. Also, the BCM5461S has extremely low EMI emissions, which reduces the design constraints required to meet EMI emission specifications.

FEATURES
• Fully-integrated 10BASE-T/100BASE-TX/1000BASE-T Gigabit Ethernet transceiver
• GMII, RGMII, SGMII, SerDes, RTBI and MII MAC Interface options
• Line-side copper and fiber interfaces
• On-chip low-voltage regulators
• Fully compliant with IEEE 802.3, 802.3u, and 802.3ab standards
• 0.13µ CMOS — low power and cost
• Low power
   - Less than 700 mW per port
   - Wake on LAN support
   - Advanced power management
• Trace matched output impedance
• Line-side loopback
• Low EMI emissions
• Cable plant diagnostic
   - Cable plant analyzer function detects cable plant impairments
   - Link quality indication LED
   - Automatic detection and correction of wiring pair swaps, pair skew, and pair polarity
   - Automatic MDI/MDIX crossover at all speeds
• Robust CESD tolerance
• Support for jumbo packets up to 9 KB
• IEEE 1149.1 (JTAG) boundary scan
• 128-pin MQFP, 117-pin BGA, and 100-pin FBGA packages

View
BCM5461SA1KPF [10/100/1000BASE-T GIGABIT COPPER TRANSCEIVER ]

other parts : BCM5461S  BCM5461SA1IPFG 

Broadcom
Broadcom Corporation

The BCM5461S is a fully integrated 10/100/1000BASE-T Gigabit Ethernet transceiver optimized for low power and small footprint size to enable backplane and uplink applications. By lowering system cost and reducing power dissipation by nearly 30%, the BCM5461S enables a new class of cost-effective Gigabit Ethernet equipment, driving the delivery of Gigabit bandwidth to the desktop.
The BCM5461S’s Digital Signal Processor based architecture and advanced power management techniques combine to achieve robust and low-power operation over the existing CAT 5 twisted-pair wiring. The BCM5461S architecture also meets the requirements of 802.3, 802.3u, and 802.3ab, but maintains the industry’s highest level of margin over IEEE requirements for Echo, NEXT, and FEXT. Low power is a key factor in implementing Gigabit small form factor NICs and uplinks and, at less than 700 mW per port, the BCM5461S has the industrys lowest power requirement. For NIC applications, support for Wake on LAN enables compliance with PCI 2.2 and PC99/PC2000. Also, the BCM5461S has extremely low EMI emissions, which reduces the design constraints required to meet EMI emission specifications.

FEATURES
• Fully-integrated 10BASE-T/100BASE-TX/1000BASE-T Gigabit Ethernet transceiver
• GMII, RGMII, SGMII, SerDes, RTBI and MII MAC Interface options
• Line-side copper and fiber interfaces
• On-chip low-voltage regulators
• Fully compliant with IEEE 802.3, 802.3u, and 802.3ab standards
• 0.13µ CMOS — low power and cost
• Low power
   - Less than 700 mW per port
   - Wake on LAN support
   - Advanced power management
• Trace matched output impedance
• Line-side loopback
• Low EMI emissions
• Cable plant diagnostic
   - Cable plant analyzer function detects cable plant impairments
   - Link quality indication LED
   - Automatic detection and correction of wiring pair swaps, pair skew, and pair polarity
   - Automatic MDI/MDIX crossover at all speeds
• Robust CESD tolerance
• Support for jumbo packets up to 9 KB
• IEEE 1149.1 (JTAG) boundary scan
• 128-pin MQFP, 117-pin BGA, and 100-pin FBGA packages

View
BCM5461SA1IPFG [10/100/1000BASE-T GIGABIT COPPER TRANSCEIVER ]

other parts : BCM5461S  BCM5461SA1KPF 

Broadcom
Broadcom Corporation

The BCM5461S is a fully integrated 10/100/1000BASE-T Gigabit Ethernet transceiver optimized for low power and small footprint size to enable backplane and uplink applications. By lowering system cost and reducing power dissipation by nearly 30%, the BCM5461S enables a new class of cost-effective Gigabit Ethernet equipment, driving the delivery of Gigabit bandwidth to the desktop.
The BCM5461S’s Digital Signal Processor based architecture and advanced power management techniques combine to achieve robust and low-power operation over the existing CAT 5 twisted-pair wiring. The BCM5461S architecture also meets the requirements of 802.3, 802.3u, and 802.3ab, but maintains the industry’s highest level of margin over IEEE requirements for Echo, NEXT, and FEXT. Low power is a key factor in implementing Gigabit small form factor NICs and uplinks and, at less than 700 mW per port, the BCM5461S has the industrys lowest power requirement. For NIC applications, support for Wake on LAN enables compliance with PCI 2.2 and PC99/PC2000. Also, the BCM5461S has extremely low EMI emissions, which reduces the design constraints required to meet EMI emission specifications.

FEATURES
• Fully-integrated 10BASE-T/100BASE-TX/1000BASE-T Gigabit Ethernet transceiver
• GMII, RGMII, SGMII, SerDes, RTBI and MII MAC Interface options
• Line-side copper and fiber interfaces
• On-chip low-voltage regulators
• Fully compliant with IEEE 802.3, 802.3u, and 802.3ab standards
• 0.13µ CMOS — low power and cost
• Low power
   - Less than 700 mW per port
   - Wake on LAN support
   - Advanced power management
• Trace matched output impedance
• Line-side loopback
• Low EMI emissions
• Cable plant diagnostic
   - Cable plant analyzer function detects cable plant impairments
   - Link quality indication LED
   - Automatic detection and correction of wiring pair swaps, pair skew, and pair polarity
   - Automatic MDI/MDIX crossover at all speeds
• Robust CESD tolerance
• Support for jumbo packets up to 9 KB
• IEEE 1149.1 (JTAG) boundary scan
• 128-pin MQFP, 117-pin BGA, and 100-pin FBGA packages

View
BCM5461SA3KFBG [Ethernet ICs 10/100/1000BASE-T SINGLE ] ETC
Unspecified
View
BCM5461SA1KPFG [Ethernet ICs 10/100/1000Base-T Gigabit Ethe ] ETC
Unspecified
View
BCM5461SA1IPFG [Ethernet ICs I-Temp Single Port 10/100/1000 ] ETC
Unspecified
View
BCM5461SA2KQMG [Ethernet ICs 10/100/1000 Base-T Gigabit Ethe ] ETC
Unspecified
View
1

HOME



Language : 한국어   日本語   русский   简体中文   español
@ 2015 - 2018  [ Home ][ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]