Integrated circuits, Transistor, Semiconductors Free Datasheet Search and Download Site

LM104

  

データシート

一致 , 類似 LM104 LM1040 LM1042 LM1044 LM104H
前一致 LM104* LM1040* LM1042* LM1044* LM104H*
後一致 N/A
含む N/A

詳細を見る

LM104 [Negative Regulator ]

other parts : LM104H  LM204  LM204H  LM304  LM304H 

National-Semiconductor
National ->Texas Instruments

General Description
The LM104 series are precision voltage regulators which can be programmed by a single external resistor to supply any voltage from 40V down to zero while operating from a single unregulated supply. They can also provide 0.01-percent regulation in circuits using a separate, floating bias supply, where the output voltage is limited only by the breakdown of external pass transistors. Although designed primarily as linear, series regulators, the circuits can be used as switching regulators, current regulators or in a number of other control applications. Typical performance characteristics are:

Subsurface zener reference
1 mV regulation no load to full load
0.01%/V line regulation
0.2 mV/V ripple rejection
0.3% temperature stability over military temperature range

View
LM1040 [DUAL DC OPERATED TONE / VOLUME / BALANCE CIRCUIT WITH STEREO ENHANCEMENT FACILITY ]

other parts : LM1040N 

National-Semiconductor
National ->Texas Instruments
View
LM104H [Negative Regulator ]

other parts : LM104  LM204  LM204H  LM304  LM304H 

National-Semiconductor
National ->Texas Instruments

General Description
The LM104 series are precision voltage regulators which can be programmed by a single external resistor to supply any voltage from 40V down to zero while operating from a single unregulated supply. They can also provide 0.01-percent regulation in circuits using a separate, floating bias supply, where the output voltage is limited only by the breakdown of external pass transistors. Although designed primarily as linear, series regulators, the circuits can be used as switching regulators, current regulators or in a number of other control applications. Typical performance characteristics are:

Subsurface zener reference
1 mV regulation no load to full load
0.01%/V line regulation
0.2 mV/V ripple rejection
0.3% temperature stability over military temperature range

View
LM1044 [Analog Video Switch ]

other parts : LM1044N 

National-Semiconductor
National ->Texas Instruments

General Description
Primarily intended for, but not restricted to, the switching of video signals, the LM1044 is a monolithic DC controlled analog switch with buffered outputs, allowing the selection of three 5 MHz bandwidth, 6 dB gain channels, or two RGBaSync, 30 MHz bandwidth, 0 dB gain channels. Channel selection is achieved via latched, TTL compatible, logic inputs which may be controlled by microprocessor derived signals. The device is supplied in a 24 pin dual in line plastic package.

Features
Wide RGB bandwidth, typically 30 MHz
High signal to noise ratio, typically 60 dB
Excellent channel isolation typically b60 dB @ 5 MHz
High RGB output currents; typically 4 mA peak
RGB channels may be DC restored or clamped
Logically compatible with the LM1038 stereo audio switch IC

View
LM1042 [1.5A Low Dropout Positive Regulators ] National-Semiconductor
National ->Texas Instruments

General Description
Primarily intended for, but not restricted to, the switching of video signals, the LM1044 is a monolithic DC controlled analog switch with buffered outputs, allowing the selection of three 5 MHz bandwidth, 6 dB gain channels, or two RGBaSync, 30 MHz bandwidth, 0 dB gain channels. Channel selection is achieved via latched, TTL compatible, logic inputs which may be controlled by microprocessor derived signals. The device is supplied in a 24 pin dual in line plastic package.

Features
Wide RGB bandwidth, typically 30 MHz
High signal to noise ratio, typically 60 dB
Excellent channel isolation typically b60 dB @ 5 MHz
High RGB output currents; typically 4 mA peak
RGB channels may be DC restored or clamped
Logically compatible with the LM1038 stereo audio switch IC

View
LM1040N [DUAL DC OPERATED TONE / VOLUME / BALANCE CIRCUIT WITH STEREO ENHANCEMENT FACILITY ]

other parts : LM1040 

National-Semiconductor
National ->Texas Instruments
View
LM1044N [Analog Video Switch ]

other parts : LM1044 

National-Semiconductor
National ->Texas Instruments

General Description
Primarily intended for, but not restricted to, the switching of video signals, the LM1044 is a monolithic DC controlled analog switch with buffered outputs, allowing the selection of three 5 MHz bandwidth, 6 dB gain channels, or two RGBaSync, 30 MHz bandwidth, 0 dB gain channels. Channel selection is achieved via latched, TTL compatible, logic inputs which may be controlled by microprocessor derived signals. The device is supplied in a 24 pin dual in line plastic package.

Features
Wide RGB bandwidth, typically 30 MHz
High signal to noise ratio, typically 60 dB
Excellent channel isolation typically b60 dB @ 5 MHz
High RGB output currents; typically 4 mA peak
RGB channels may be DC restored or clamped
Logically compatible with the LM1038 stereo audio switch IC

View
LM1042N [Fluid Level Detector ] TI
Texas Instruments
View
LM1042N [Fluid Level Detector ] National-Semiconductor
National ->Texas Instruments
View
1

HOME



Language : English   한국어   русский   简体中文   español
@ 2015 - 2018  [ Home ][ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]