Integrated circuits, Transistor, Semiconductors Free Datasheet Search and Download Site


LM391

  

Datasheet

Match, Like LM391 LM3911 LM3914 LM3915 LM3916
Start with LM3910* LM3911* LM3914* LM3915* LM3916* LM391N*
End N/A
Included N/A
View Details    
LM391 [Audio Power Driver ]

other parts : LM391N-100 

National-Semiconductor
National ->Texas Instruments

General Description
The LM391 audio power driver is designed to drive external power transistors in 10 to 100 watt power amplifier designs. High power supply voltage operation and true high fidelity performance distinguish this IC. The LM391 is internally protected for output faults and thermal overloads; circuitry providing output transistor protection is user programmable.

Features
High Supply Voltage                 ±50V max
Low Distortion                         0.01%
Low Input Noise                      3mV
High Supply Rejection               90 dB
Gain and Bandwidth Selectable
Dual Slope SOA Protection
Shutdown Pin

View
LM391 [INFRARED LAMP LED ]

other parts : LB101  LB111  LB121  LB131  LB141  LB151  LB161  LB171  LB181  LB191 

Seoul
SEOUL SEMICONDUCTOR

View
LM3915 [Dot/Bar Display Driver ]

other parts : LM3915N  LM3915N-1 

National-Semiconductor
National ->Texas Instruments

General Description
The LM3915 is a monolithic integrated circuit that senses analog voltage levels and drives ten LEDs, LCDs or vacuum fluorescent displays, providing a logarithmic 3 dB/step ana log display. One pin changes the display from a bar graph to a moving dot display. LED current drive is regulated and programmable, eliminating the need for current limiting resistors. The whole display system can operate from a single
supply as low as 3V or as high as 25V.

Features
3 dB/step, 30 dB range
Drives LEDs, LCDs, or vacuum fluorescents
Bar or dot display mode externally selectable by user
Expandable to displays of 90 dB
Internal voltage reference from 1.2V to 12V
Operates with single supply of 3V to 25V
Inputs operate down to ground
Output current programmable from 1 mA to 30 mA
Input withstands ±35V without damage or false outputs
Outputs are current regulated, open collectors
Directly drives TTL or CMOS
The internal 10-step divider is floating and can be referenced to a wide range of voltages

View
LM3916 [Dot/Bar Display Driver ]

other parts : LM3916N-1  LM3916N-1/NOPB 

TI
Texas Instruments

DESCRIPTION
The LM3916 is a monolithic integrated circuit that senses analog voltage levels and drives ten LEDs,
LCDs or vacuum fluorescent displays, providing an electronic version of the popular VU meter. One pin
changes the display from a bar graph to a moving dot display. LED current drive is regulated and
programmable, eliminating the need for current limiting resistors. The whole display system can operate from a single supply as low as 3V or as high as 25V.

FEATURES
• Fast Responding Electronic VU Meter
• Drivers LEDs, LCDs, or Vacuum Fluorescents
• Bar or Dot Display Mode Externally Selectable by User
• Expandable to Displays of 70 dB
• Internal Voltage Reference from 1.2V to 12V
• Operates with Single Supply of 3V to 25V
• Inputs Operate Down to Ground
• Output Current Programmable from 1 mA to 30mA
• Input Withstands ±35V without Damage or False Outputs
• Outputs are Current Regulated, Open Collectors
• Directly Drives TTL or CMOS
• The Internal 10-step Divider is Floating and
   can be Referenced to a Wide Range of Voltages.
   The LM3916 is Rated for Operation from 0°C to +70°C.
   The LM3916N-1 is Available in an 18-lead PDIP Package.

View
LM3911 [Temperature Controller ]

other parts : LM3911H-46  LM3911N 

National-Semiconductor
National ->Texas Instruments

General Description
The LM3911 is a highly accurate temperature measurement and/or control system for use over ±25°C to ±85°C temperature range. Fabricated on a single monolithic chip, it includes a temperature sensor, a stable voltage reference and an operational amplifier.

View
LM3914 [Dot/Bar Display Driver ]

other parts : LM3914N  LM3914N-1  LM3914N-1/NOPB  LM3914V  LM3914V/NOPB  LM3914VX  LM3914VX/NOPB 

TI
Texas Instruments

DESCRIPTION
The LM3914 is a monolithic integrated circuit that senses analog voltage levels and drives 10 LEDs, providing a linear analog display. A single pin changes the display from a moving dot to a bar graph. Current drive to the LEDs is regulated and programmable, eliminating the need for resistors. This feature is one that allows operation of the whole system from less than 3V.

FEATURES
• Drives LEDs, LCDs or Vacuum Fluorescents
• Bar or Dot Display Mode Externally Selectable by User
• Expandable to Displays of 100 Steps
• Internal Voltage Reference from 1.2V to 12V
• Operates with Single Supply of Less than 3V
• Inputs Operate Down to Ground
• Output Current Programmable from 2 mA to 30 mA
• No Multiplex Switching or Interaction Between Outputs
• Input Withstands ±35V without Damage or False Outputs
• LED Driver Outputs are Current Regulated, Open-collectors
• Outputs can Interface with TTL or CMOS Logic
• The Internal 10-step Divider is Floating and can be Referenced to a Wide Range of Voltages

View
LM3914 [Dot/Bar Display Driver ]

other parts : LM3914N  LM3914N-1  LM3914V 

National-Semiconductor
National ->Texas Instruments

General Description
The LM3914 is a monolithic integrated circuit that senses analog voltage levels and drives 10 LEDs, providing a linear analog display. A single pin changes the display from a moving dot to a bar graph. Current drive to the LEDs is regulated and programmable, eliminating the need for resis tors. This feature is one that allows operation of the whole system from less than 3V.
The circuit contains its own adjustable reference and accurate 10-step voltage divider. The low-bias-current input buffer accepts signals down to ground, or V−, yet needs no protection against inputs of 35V above or below ground. The buffer drives 10 individual comparators referenced to the precision divider. Indication non-linearity can thus be held typically to 1⁄2%, even over a wide temperature range.

Features
■ Drives LEDs, LCDs or vacuum fluorescents
■ Bar or dot display mode externally selectable by user
■ Expandable to displays of 100 steps
■ Internal voltage reference from 1.2V to 12V
■ Operates with single supply of less than 3V
■ Inputs operate down to ground
■ Output current programmable from 2 mA to 30 mA
■ No multiplex switching or interaction between outputs
■ Input withstands ±35V without damage or false outputs
■ LED driver outputs are current regulated, open-collectors
■ Outputs can interface with TTL or CMOS logic
■ The internal 10-step divider is floating and can be referenced to a wide range of voltages

View
LM3914 [Dot/Bar Display Driver ]

other parts : LM3914N-1/NOPB  LM3914V/NOPB  LM3914VX/NOPB  LM3914N-1  LM3914V 

Texas-Instruments
Texas Instruments

DESCRIPTION
The LM3914 is a monolithic integrated circuit that senses analog voltage levels and drives 10 LEDs, providing a linear analog display. A single pin changes the display from a moving dot to a bar graph. Current drive to the LEDs is regulated and programmable, eliminating the need for resistors. This feature is one that allows operation of the whole system from less than 3V.
The circuit contains its own adjustable reference and accurate 10-step voltage divider. The low-bias-current input buffer accepts signals down to ground, or V−, yet needs no protection against inputs of 35V above or below ground. The buffer drives 10 individual comparators referenced to the precision divider. Indication non-linearity can thus be held typically to ½%, even over a wide temperature range.

FEATURES
• Drives LEDs, LCDs or Vacuum Fluorescents
• Bar or Dot Display Mode Externally Selectable by User
• Expandable to Displays of 100 Steps
• Internal Voltage Reference from 1.2V to 12V
• Operates with Single Supply of Less than 3V
• Inputs Operate Down to Ground
• Output Current Programmable from 2 mA to 30 mA
• No Multiplex Switching or Interaction Between Outputs
• Input Withstands ±35V without Damage or False Outputs
• LED Driver Outputs are Current Regulated, Open-collectors
• Outputs can Interface with TTL or CMOS Logic
• The Internal 10-step Divider is Floating and
   can be Referenced to a Wide Range of Voltages

View
LM3914V [Dot/Bar Display Driver ]

other parts : LM3914  LM3914N  LM3914N-1  LM3914N-1/NOPB  LM3914V/NOPB  LM3914VX  LM3914VX/NOPB 

TI
Texas Instruments

DESCRIPTION
The LM3914 is a monolithic integrated circuit that senses analog voltage levels and drives 10 LEDs, providing a linear analog display. A single pin changes the display from a moving dot to a bar graph. Current drive to the LEDs is regulated and programmable, eliminating the need for resistors. This feature is one that allows operation of the whole system from less than 3V.

FEATURES
• Drives LEDs, LCDs or Vacuum Fluorescents
• Bar or Dot Display Mode Externally Selectable by User
• Expandable to Displays of 100 Steps
• Internal Voltage Reference from 1.2V to 12V
• Operates with Single Supply of Less than 3V
• Inputs Operate Down to Ground
• Output Current Programmable from 2 mA to 30 mA
• No Multiplex Switching or Interaction Between Outputs
• Input Withstands ±35V without Damage or False Outputs
• LED Driver Outputs are Current Regulated, Open-collectors
• Outputs can Interface with TTL or CMOS Logic
• The Internal 10-step Divider is Floating and can be Referenced to a Wide Range of Voltages

View
LM3914V [Dot/Bar Display Driver ]

other parts : LM3914  LM3914N  LM3914N-1 

National-Semiconductor
National ->Texas Instruments

General Description
The LM3914 is a monolithic integrated circuit that senses analog voltage levels and drives 10 LEDs, providing a linear analog display. A single pin changes the display from a moving dot to a bar graph. Current drive to the LEDs is regulated and programmable, eliminating the need for resis tors. This feature is one that allows operation of the whole system from less than 3V.
The circuit contains its own adjustable reference and accurate 10-step voltage divider. The low-bias-current input buffer accepts signals down to ground, or V−, yet needs no protection against inputs of 35V above or below ground. The buffer drives 10 individual comparators referenced to the precision divider. Indication non-linearity can thus be held typically to 1⁄2%, even over a wide temperature range.

Features
■ Drives LEDs, LCDs or vacuum fluorescents
■ Bar or dot display mode externally selectable by user
■ Expandable to displays of 100 steps
■ Internal voltage reference from 1.2V to 12V
■ Operates with single supply of less than 3V
■ Inputs operate down to ground
■ Output current programmable from 2 mA to 30 mA
■ No multiplex switching or interaction between outputs
■ Input withstands ±35V without damage or false outputs
■ LED driver outputs are current regulated, open-collectors
■ Outputs can interface with TTL or CMOS logic
■ The internal 10-step divider is floating and can be referenced to a wide range of voltages

View
1 2 3 4 5 6 7 8 9 10 Next
Share Link : 

HOME




Language : 한국어     日本語     русский     简体中文     español
@ 2015 - 2018  [ Home ][ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]