datasheetQ language:

NCP348

  

Datasheet

Match, Like NCP348 NCP3488
Start with NCP348* NCP3488* NCP348A* NCP348E* NCP348M*
End N/A
Included N/A

View Details

Manufacturer Part no Description View
ON-Semiconductor
ON Semiconductor
NCP348 Positive Overvoltage Protection Controller with Internal Low RON NMOS FET and Status FLAG

The NCP348 is able to disconnect the systems from its output pin in case wrong input operating conditions are detected. The system is positive overvoltage protected up to +28 V.
Due to this device using internal NMOS, no external device is necessary, reducing the system cost and the PCB area of the application board.
The NCP348 is able to instantaneously disconnect the output from the input, due to integrated Low RON Power NMOS (65 mΩ), if the input voltage exceeds the overvoltage


other parts : NCP348AE NCP348AEMTTBG NCP348AEMTTXG NCP348AMTTBG NCP348AMTTXG NCP348EMTTBG NCP348EMTTXG NCP348MTTBG NCP348MTTXG 
ON-Semiconductor
ON Semiconductor
NCP3488 MOSFET Driver with Dual Outputs for Synchronous Buck Converters

The NCP3488 is a single Phase 12 V MOSFET gate driver optimized to drive the gates of both high−side and low−side power MOSFETs in a synchronous buck converter. The high−side and low−side driver is capable of driving a 3000 pF load with a 25 ns propagation delay and a 20 ns transition time.
With a wide operating voltage range, high or low side MOSFET gate drive voltage can be optimized for the best efficiency. Internal adaptive nonoverlap circuitry further reduces switching losses


other parts : NCP3488DR2G 
ON-Semiconductor
ON Semiconductor
NCP348AE Positive Overvoltage Protection Controller with Internal Low RON NMOS FET and Status FLAG

The NCP348 is able to disconnect the systems from its output pin in case wrong input operating conditions are detected. The system is positive overvoltage protected up to +28 V.
Due to this device using internal NMOS, no external device is necessary, reducing the system cost and the PCB area of the application board.
The NCP348 is able to instantaneously disconnect the output from the input, due to integrated Low RON Power NMOS (65 mΩ), if the input voltage exceeds the overvoltage


other parts : NCP348 NCP348AEMTTBG NCP348AEMTTXG NCP348AMTTBG NCP348AMTTXG NCP348EMTTBG NCP348EMTTXG NCP348MTTBG NCP348MTTXG 
ON-Semiconductor
ON Semiconductor
NCP348MTTXG Positive Overvoltage Protection Controller with Internal Low RON NMOS FET and Status FLAG

The NCP348 is able to disconnect the systems from its output pin in case wrong input operating conditions are detected. The system is positive overvoltage protected up to +28 V.
Due to this device using internal NMOS, no external device is necessary, reducing the system cost and the PCB area of the application board.
The NCP348 is able to instantaneously disconnect the output from the input, due to integrated Low RON Power NMOS (65 mΩ), if the input voltage exceeds the overvoltage


other parts : NCP348 NCP348AE NCP348AEMTTBG NCP348AEMTTXG NCP348AMTTBG NCP348AMTTXG NCP348EMTTBG NCP348EMTTXG NCP348MTTBG 
ON-Semiconductor
ON Semiconductor
NCP3488DR2G MOSFET Driver with Dual Outputs for Synchronous Buck Converters

The NCP3488 is a single Phase 12 V MOSFET gate driver optimized to drive the gates of both high−side and low−side power MOSFETs in a synchronous buck converter. The high−side and low−side driver is capable of driving a 3000 pF load with a 25 ns propagation delay and a 20 ns transition time.
With a wide operating voltage range, high or low side MOSFET gate drive voltage can be optimized for the best efficiency. Internal adaptive nonoverlap circuitry further reduces switching losses


other parts : NCP3488 
ON-Semiconductor
ON Semiconductor
NCP348MTTBG Positive Overvoltage Protection Controller with Internal Low RON NMOS FET and Status FLAG

The NCP348 is able to disconnect the systems from its output pin in case wrong input operating conditions are detected. The system is positive overvoltage protected up to +28 V.
Due to this device using internal NMOS, no external device is necessary, reducing the system cost and the PCB area of the application board.
The NCP348 is able to instantaneously disconnect the output from the input, due to integrated Low RON Power NMOS (65 mΩ), if the input voltage exceeds the overvoltage


other parts : NCP348 NCP348AE NCP348AEMTTBG NCP348AEMTTXG NCP348AMTTBG NCP348AMTTXG NCP348EMTTBG NCP348EMTTXG NCP348MTTXG 
ON-Semiconductor
ON Semiconductor
NCP348EMTTXG Positive Overvoltage Protection Controller with Internal Low RON NMOS FET and Status FLAG

The NCP348 is able to disconnect the systems from its output pin in case wrong input operating conditions are detected. The system is positive overvoltage protected up to +28 V.
Due to this device using internal NMOS, no external device is necessary, reducing the system cost and the PCB area of the application board.
The NCP348 is able to instantaneously disconnect the output from the input, due to integrated Low RON Power NMOS (65 mΩ), if the input voltage exceeds the overvoltage


other parts : NCP348 NCP348AE NCP348AEMTTBG NCP348AEMTTXG NCP348AMTTBG NCP348AMTTXG NCP348EMTTBG NCP348MTTBG NCP348MTTXG 
ON-Semiconductor
ON Semiconductor
NCP348AMTTXG Positive Overvoltage Protection Controller with Internal Low RON NMOS FET and Status FLAG

The NCP348 is able to disconnect the systems from its output pin in case wrong input operating conditions are detected. The system is positive overvoltage protected up to +28 V.
Due to this device using internal NMOS, no external device is necessary, reducing the system cost and the PCB area of the application board.
The NCP348 is able to instantaneously disconnect the output from the input, due to integrated Low RON Power NMOS (65 mΩ), if the input voltage exceeds the overvoltage


other parts : NCP348 NCP348AE NCP348AEMTTBG NCP348AEMTTXG NCP348AMTTBG NCP348EMTTBG NCP348EMTTXG NCP348MTTBG NCP348MTTXG 
ON-Semiconductor
ON Semiconductor
NCP348EMTTBG Positive Overvoltage Protection Controller with Internal Low RON NMOS FET and Status FLAG

The NCP348 is able to disconnect the systems from its output pin in case wrong input operating conditions are detected. The system is positive overvoltage protected up to +28 V.
Due to this device using internal NMOS, no external device is necessary, reducing the system cost and the PCB area of the application board.
The NCP348 is able to instantaneously disconnect the output from the input, due to integrated Low RON Power NMOS (65 mΩ), if the input voltage exceeds the overvoltage


other parts : NCP348 NCP348AE NCP348AEMTTBG NCP348AEMTTXG NCP348AMTTBG NCP348AMTTXG NCP348EMTTXG NCP348MTTBG NCP348MTTXG 
ON-Semiconductor
ON Semiconductor
NCP348AMTTBG Positive Overvoltage Protection Controller with Internal Low RON NMOS FET and Status FLAG

The NCP348 is able to disconnect the systems from its output pin in case wrong input operating conditions are detected. The system is positive overvoltage protected up to +28 V.
Due to this device using internal NMOS, no external device is necessary, reducing the system cost and the PCB area of the application board.
The NCP348 is able to instantaneously disconnect the output from the input, due to integrated Low RON Power NMOS (65 mΩ), if the input voltage exceeds the overvoltage


other parts : NCP348 NCP348AE NCP348AEMTTBG NCP348AEMTTXG NCP348AMTTXG NCP348EMTTBG NCP348EMTTXG NCP348MTTBG NCP348MTTXG 

1

2



Language : 한국어   日本語   русский   简体中文   español
@ 2015 - 2017  [ Home ][ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]