Product Description
Pericom Semiconductors PI74ALVC series of logic circuits are produced using the Companys advanced 0.5 micron CMOS technology, achieving industry leading speed.
The 18-bit PI74ALVC162834FD universal bus driver is designed for 2.3V to 3.6V VCC operation.
Data flow from A to Y is controlled by Output Enable (OE).
The device operates in the transparent mode when LE is LOW. The A data is latched if CLK is held at a high or low logic level. If LE is HIGH, the A-bus is stored in the latch/flip-flop on the low-to-high transition of CLK. When OE is HIGH, the outputs are in the high impedance state.
To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

Product Features
● PI74ALVC162834F is designed for low voltage operation,
   VCC= 2.3V to 3.6V
● Data inputs have clamp diodes to VCC
● Outputs have equivalent 26Ω series resistors
● Supports PC133 Registered DIMM
● Typical VOLP (Output Ground Bounce)
   < 0.8V at VCC = 3.3V, TA = 25°C
● Typical VOHV (Output Voh Undershoot)
   < 2.0V at VCC = 3.3V, TA= 25°C
● Industrial operation at -40°C to +85°C
● Packages available:
   - 56-pin 240 mil wide plastic TSSOP (A)
   - 56-pin 173 mil wide plastic TVSOP (K)
   - 56-pin 300 mil wide plastic SSOP (V)

Product Description
Pericom Semiconductors PI74ALVC series of logic circuits are produced using the Companys advanced 0.5 micron CMOS technology, achieving industry leading speed.
The 18-bit PI74ALVC162834FD universal bus driver is designed for 2.3V to 3.6V VCC operation.
Data flow from A to Y is controlled by Output Enable (OE). The device operates in the transparent mode when LE is LOW. The A data is latched if CLK is held at a high or low logic level. If LE is HIGH, the A-bus is stored in the latch/flip-flop on the low-to-high transition of CLK. When OE is HIGH, the outputs are in the high impedance state.
To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

Product Features
• PI74ALVC162834F is designed for low voltage operation, VCC= 2.3V to 3.6V
• Data inputs have clamp diodes to VCC
• Outputs have equivalent 26Ω series resistors
• Supports PC133 Registered DIMM
• Typical VOLP (Output Ground Bounce)
   < 0.8V at VCC = 3.3V, TA = 25°C
• Typical VOHV (Output Voh Undershoot)
   < 2.0V at VCC = 3.3V, TA= 25°C
• Industrial operation at -40°C to +85°C
• Packages available:
   - 56-pin 240 mil wide plastic TSSOP (A)
   - 56-pin 173 mil wide plastic TVSOP (K)
   - 56-pin 300 mil wide plastic SSOP (V)

Product Description
Pericom Semiconductors PI74ALVC series of logic circuits are produced using the Companys advanced 0.5 micron CMOS technology, achieving industry leading speed.
The 18-bit PI74ALVC162834FD universal bus driver is designed for 2.3V to 3.6V VCC operation.
Data flow from A to Y is controlled by Output Enable (OE).
The device operates in the transparent mode when LE is LOW. The A data is latched if CLK is held at a high or low logic level. If LE is HIGH, the A-bus is stored in the latch/flip-flop on the low-to-high transition of CLK. When OE is HIGH, the outputs are in the high impedance state.
To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

Product Features
● PI74ALVC162834F is designed for low voltage operation,
   VCC= 2.3V to 3.6V
● Data inputs have clamp diodes to VCC
● Outputs have equivalent 26Ω series resistors
● Supports PC133 Registered DIMM
● Typical VOLP (Output Ground Bounce)
   < 0.8V at VCC = 3.3V, TA = 25°C
● Typical VOHV (Output Voh Undershoot)
   < 2.0V at VCC = 3.3V, TA= 25°C
● Industrial operation at -40°C to +85°C
● Packages available:
   - 56-pin 240 mil wide plastic TSSOP (A)
   - 56-pin 173 mil wide plastic TVSOP (K)
   - 56-pin 300 mil wide plastic SSOP (V)

Product Description
Pericom Semiconductors PI74ALVC series of logic circuits are produced using the Companys advanced 0.5 micron CMOS technology, achieving industry leading speed.
The 18-bit PI74ALVC162834FD universal bus driver is designed for 2.3V to 3.6V VCC operation.
Data flow from A to Y is controlled by Output Enable (OE). The device operates in the transparent mode when LE is LOW. The A data is latched if CLK is held at a high or low logic level. If LE is HIGH, the A-bus is stored in the latch/flip-flop on the low-to-high transition of CLK. When OE is HIGH, the outputs are in the high impedance state.
To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

Product Features
• PI74ALVC162834F is designed for low voltage operation, VCC= 2.3V to 3.6V
• Data inputs have clamp diodes to VCC
• Outputs have equivalent 26Ω series resistors
• Supports PC133 Registered DIMM
• Typical VOLP (Output Ground Bounce)
   < 0.8V at VCC = 3.3V, TA = 25°C
• Typical VOHV (Output Voh Undershoot)
   < 2.0V at VCC = 3.3V, TA= 25°C
• Industrial operation at -40°C to +85°C
• Packages available:
   - 56-pin 240 mil wide plastic TSSOP (A)
   - 56-pin 173 mil wide plastic TVSOP (K)
   - 56-pin 300 mil wide plastic SSOP (V)

Product Description
Pericom Semiconductors PI74ALVC series of logic circuits are produced using the Companys advanced 0.5 micron CMOS technology, achieving industry leading speed.
The 18-bit PI74ALVC162834FD universal bus driver is designed for 2.3V to 3.6V VCC operation.
Data flow from A to Y is controlled by Output Enable (OE).
The device operates in the transparent mode when LE is LOW. The A data is latched if CLK is held at a high or low logic level. If LE is HIGH, the A-bus is stored in the latch/flip-flop on the low-to-high transition of CLK. When OE is HIGH, the outputs are in the high impedance state.
To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

Product Features
● PI74ALVC162834F is designed for low voltage operation,
   VCC= 2.3V to 3.6V
● Data inputs have clamp diodes to VCC
● Outputs have equivalent 26Ω series resistors
● Supports PC133 Registered DIMM
● Typical VOLP (Output Ground Bounce)
   < 0.8V at VCC = 3.3V, TA = 25°C
● Typical VOHV (Output Voh Undershoot)
   < 2.0V at VCC = 3.3V, TA= 25°C
● Industrial operation at -40°C to +85°C
● Packages available:
   - 56-pin 240 mil wide plastic TSSOP (A)
   - 56-pin 173 mil wide plastic TVSOP (K)
   - 56-pin 300 mil wide plastic SSOP (V)

Product Description
Pericom Semiconductors PI74ALVC series of logic circuits are produced using the Companys advanced 0.5 micron CMOS technology, achieving industry leading speed.
The 18-bit PI74ALVC162834FD universal bus driver is designed for 2.3V to 3.6V VCC operation.
Data flow from A to Y is controlled by Output Enable (OE). The device operates in the transparent mode when LE is LOW. The A data is latched if CLK is held at a high or low logic level. If LE is HIGH, the A-bus is stored in the latch/flip-flop on the low-to-high transition of CLK. When OE is HIGH, the outputs are in the high impedance state.
To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

Product Features
• PI74ALVC162834F is designed for low voltage operation, VCC= 2.3V to 3.6V
• Data inputs have clamp diodes to VCC
• Outputs have equivalent 26Ω series resistors
• Supports PC133 Registered DIMM
• Typical VOLP (Output Ground Bounce)
   < 0.8V at VCC = 3.3V, TA = 25°C
• Typical VOHV (Output Voh Undershoot)
   < 2.0V at VCC = 3.3V, TA= 25°C
• Industrial operation at -40°C to +85°C
• Packages available:
   - 56-pin 240 mil wide plastic TSSOP (A)
   - 56-pin 173 mil wide plastic TVSOP (K)
   - 56-pin 300 mil wide plastic SSOP (V)

Product Description
Pericom Semiconductors PI74ALVC series of logic circuits are produced using the Companys advanced 0.5 micron CMOS technology, achieving industry leading speed.
The 18-bit PI74ALVC162834FD universal bus driver is designed for 2.3V to 3.6V VCC operation.
Data flow from A to Y is controlled by Output Enable (OE).
The device operates in the transparent mode when LE is LOW. The A data is latched if CLK is held at a high or low logic level. If LE is HIGH, the A-bus is stored in the latch/flip-flop on the low-to-high transition of CLK. When OE is HIGH, the outputs are in the high impedance state.
To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

Product Features
● PI74ALVC162834F is designed for low voltage operation,
   VCC= 2.3V to 3.6V
● Data inputs have clamp diodes to VCC
● Outputs have equivalent 26Ω series resistors
● Supports PC133 Registered DIMM
● Typical VOLP (Output Ground Bounce)
   < 0.8V at VCC = 3.3V, TA = 25°C
● Typical VOHV (Output Voh Undershoot)
   < 2.0V at VCC = 3.3V, TA= 25°C
● Industrial operation at -40°C to +85°C
● Packages available:
   - 56-pin 240 mil wide plastic TSSOP (A)
   - 56-pin 173 mil wide plastic TVSOP (K)
   - 56-pin 300 mil wide plastic SSOP (V)

Product Description
Pericom Semiconductors PI74ALVC series of logic circuits are produced using the Companys advanced 0.5 micron CMOS technology, achieving industry leading speed.
The 18-bit PI74ALVC162834FD universal bus driver is designed for 2.3V to 3.6V VCC operation.
Data flow from A to Y is controlled by Output Enable (OE). The device operates in the transparent mode when LE is LOW. The A data is latched if CLK is held at a high or low logic level. If LE is HIGH, the A-bus is stored in the latch/flip-flop on the low-to-high transition of CLK. When OE is HIGH, the outputs are in the high impedance state.
To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

Product Features
• PI74ALVC162834F is designed for low voltage operation, VCC= 2.3V to 3.6V
• Data inputs have clamp diodes to VCC
• Outputs have equivalent 26Ω series resistors
• Supports PC133 Registered DIMM
• Typical VOLP (Output Ground Bounce)
   < 0.8V at VCC = 3.3V, TA = 25°C
• Typical VOHV (Output Voh Undershoot)
   < 2.0V at VCC = 3.3V, TA= 25°C
• Industrial operation at -40°C to +85°C
• Packages available:
   - 56-pin 240 mil wide plastic TSSOP (A)
   - 56-pin 173 mil wide plastic TVSOP (K)
   - 56-pin 300 mil wide plastic SSOP (V)