Integrated circuits, Transistor, Semiconductors Free Datasheet Search and Download Site

41BS

  

Datasheet

Match, Like N/A
Start with N/A
End *241BS *041BS *841BS *741BS *541BS *941BS *141BS *341BS *641BS
Included *41BS* *41BS-* *41BS/* *41BSD* *41BSG* *41BSK* *41BSO* *41BST* *41BSV* *41BSZ* *41BS_*
View Details    
PCA9541BS/01 [2-to-1 I2C master selector with interrupt logic and reset ]

other parts : PCA9541  PCA9541BS/02  PCA9541BS/03  PCA9541D/01  PCA9541D/02  PCA9541D/03  PCA9541PW/01 

Philips
Philips Electronics

DESCRIPTION
The PCA9541 is a 2-to-1 I2C master selector designed for high reliability dual master I2C applications where system operation is required, even when one master fails or the controller card is removed for maintenance. The two masters (e.g., primary and back-up) are located on separate I2C-buses that connect to the same downstream I2C-bus slave devices. I2C commands are sent
by either I2C-bus master and are used to select one master at a time. Either master at any time can gain control of the slave devices if the other master is disabled or removed from the system. The failed master is isolated from the system and will not affect communication between the on-line master and the slave devices on the downstream I2C-bus.

FEATURES
•2-to-1 bi-directional master selector
•I2C interface logic; compatible with SMBus standards
•PCA9541/01 powers-up with Channel 0 selected
•PCA9541/02 powers-up with Channel 0 selected after STOP condition detected (bus idle) on Channel 0
•PCA9541/03 powers-up with no channel selected and either master can take control of the bus
•Active LOW Interrupt Input
•2 Active LOW Interrupt Outputs
•Active LOW Reset Input
•4 address pins allowing up to 16 devices on the I2C-bus
•Channel selection via I2C-bus
•Bus initialization/recovery function
•Bus traffic sensor
•Low RdsON switches
•Allows voltage level translation between 1.8 V, 2.5 V, 3.3 V and 5 V buses
•No glitch on power-up
•Supports hot insertion
•Software identical for both masters
•Low stand-by current
•Operating power supply voltage range of 2.3 V to 5.5 V
•6.0 V tolerant Inputs
•0 to 400 kHz clock frequency
•ESD protection exceeds 2000 V HBM per JESD22-A114, 200 V MM per JESD22-A115 and 1000 V CDM per JESD22-C101
•Latch-up testing is done to JESDEC Standard JESD78 which exceeds 100 mA
•Packages offered: SO16, TSSOP16, HVQFN16

APPLICATIONS
•High reliability systems with dual masters
•Gatekeeper multiplexer on long single bus
•Bus initialization/recovery for slave devices without hardware reset
•Allows masters without arbitration logic to share resources

 

View
SC4041BS [PRECISION SHUNT VOLTAGE REFERENCE ]

other parts : SC4041  SC4041AS  SC4041ASK  SC4041ASKTA  SC4041ASKTR  SC4041ASTA  SC4041ASTR 

Semtech
Semtech Corporation

DESCRIPTION
The SC4041 is a two terminal precision voltage reference with thermal stability guaranteed over temperature. The very low fixed output voltage of 1.225 V is ideal for use with today’s low voltage integrated circuits. The SC4041 has a typical dynamic output impedance of 0.25Ω. Active output circuitry provides a very sharp turn on characteristic - the minimum operating current is 60µA, with a maximum of 20mA.
Available with five voltage tolerances (0.1%, 0.2%, 0.5%, 1.0% and 2.0%) and three package outlines (SOT-23, SO-8 and TO-92), this part allows the designer the opportunity to select the optimum combination of cost and performance for their application.

FEATURES
• Low voltage operation (1.225V)
• Trimmed bandgap design (0.1%)
• Wide operating current range 60µA to 20mA
• Low dynamic impedance (0.25Ω)
• Available in SOT-23, TO-92 and SO-8

APPLICATIONS
• Cellular telephones
• Portable computers
• Instrumentation
• Automotive

 

View
MMSZ5241BS_01 [SURFACE MOUNT SILICON ZENER DIODES ]

other parts : MMSZ5221BS_01  MMSZ5222BS_01  MMSZ5223BS_01  MMSZ5225BS_01  MMSZ5226BS_01  MMSZ5227BS_01  MMSZ5228BS_01 

PanJit
PANJIT INTERNATIONAL

VOLTAGE 2.4 - 39 Volts POWER 200 mWatts

FEATURES
• Planar Die construction
• 200mW Power Dissipation
• Zener Voltages from 2.4V - 39V
• Ideally Suited for Automated Assembly Processes

View
L4941BS [VERY LOW DROP 1A REGULATOR ] ST-Microelectronics
STMicroelectronics

DESCRIPTION
The L4941 is a three terminal 5 V positive regulator available in TO-220, SOT-82, SOT-194 and DPAK packages, making it useful in a wide range of the industrial and consumer applications. Thanks to its very low input/output voltage drop, this device is particularly suitable for battery powered equipment, reducing consumption and prolonging battery life. It employs internal current limiting, antisaturation circuit, thermal shut-down and safe area protection.

. LOW DROPOUT VOLTAGE (450 mV typ at 1A)
. VERY LOW QUIESCENT CURRENT
. THERMAL SHUTDOWN
. SHORT CIRCUIT PROTECTION
. REVERSE POLARITY PROTECTION

 

View
MMSZ5241BS [Surface mount zener diode ]

other parts : MMSZ5221BS  MMSZ5223BS  MMSZ5225BS  MMSZ5226BS  MMSZ5227BS  MMSZ5228BS  MMSZ5229BS 

CHENDA
Jiangsu Yutai Electronics Co., Ltd

FEATURES
● Planar die construction
● General purpose, medium current
● Ideally suited for automated assembly processes

APPLICATIONS
● Zener diode
● Ultra-small surface mount package

View
MMSZ5241BS_Rev5-2 [SURFACE MOUNT ZENER DIODE ]

other parts : MMSZ5221BS_Rev5-2  MMSZ5223BS_Rev5-2  MMSZ5225BS_Rev5-2  MMSZ5226BS_Rev5-2  MMSZ5227BS_Rev5-2  MMSZ5228BS_Rev5-2  MMSZ5229BS_Rev5-2 

Diodes
Diodes Incorporated.

Features
● Planar Die Construction
● Ultra-Small Surface Mount Package
● General Purpose
● Ideally suited for Automated Assembly Processes

View
MMSZ5241BS [Surface mount zener diode ]

other parts : MMSZ5221BS  MMSZ5223BS  MMSZ5225BS  MMSZ5226BS  MMSZ5227BS  MMSZ5228BS  MMSZ5229BS 

LUGUANG
Shenzhen Luguang Electronic Technology Co., Ltd

Surface mount zener diode

FEATURES
Planar die construction    
General purpose, medium current
Ideally suited for automated assembly processes

APPLICATIONS
Zener diode
Ultra-small surface mount package

View
MMSZ5241BS [Surface mount zener diode ]

other parts : MMSZ5221BS  MMSZ5223BS  MMSZ5225BS  MMSZ5226BS  MMSZ5227BS  MMSZ5228BS  MMSZ5229BS 

DSK
Diode Semiconductor Korea

FEATURES
● Planar die construction.
● General purpose, medium current.
● Ideally suited for automated assembly processes.

APPLICATIONS
● Zener diode.
● Ultra-small surface mount package.

View
MMSZ5241BS [Surface Mount Zener Diodes ]

other parts : MMSZ5221BS  MMSZ5223BS  MMSZ5225BS  MMSZ5226BS  MMSZ5227BS  MMSZ5228BS  MMSZ5229BS 

Kexin
KEXIN Industrial

Features
● Ultra-Small Surface Mount Package
● Planar Die Construction
● General Purpose

View
MMSZ5241BS [200mW SURFACE MOUNT ZENER DIODE ]

other parts : MMSZ5221BS  MMSZ5221BS-T1  MMSZ5221BS-T1-LF  MMSZ5222BS  MMSZ5222BS-T1  MMSZ5222BS-T1-LF  MMSZ5223BS 

WTE
Won-Top Electronics

Features
● Planar Die Construction
● 200mW Power Dissipation
● 2.4 – 51V Nominal Zener Voltage
● 5% Standard Vz Tolerance
● Designed for Surface Mount Application
● Plastic Material – UL Recognition Flammability Classification 94V-O

View
1 2 3 4 5 6 7
Share Link : 

New and Popular Datasheet

LM317  PN2222A  1N4007  LM324N  SY8120  LM7815CK  RTL8111E-VL-CG  RTL8111  RTL8192SE  1N4001  R1200  2SD1101  2SK1588-HF  2SK1588  R2A15212FP  RH5VT30A-RF  DTC144EKA  74ABT373AN,112  ALC892  ALC5633Q  SF31  BC546  ADM8829ART  RTL8196C  RN5VT18C  QT1080-ISG  QT100  MH17  DB201S  DB207S  4244  05F5L  05F5  RF3826  RTL8309N  ALC5616  1N4728B  R2S15904SP  RTL8153  RTL8211E-VB-CG  K1588  H05U09S  R5H30211  CF5021AC-1  WHC-1500-01  HVM12  RA8806  RTL8198  D13003  RTL8196E  RTL8192  RTL8111E  RF2690  M52775FP  TDA2030A 

HOME




Language : 한국어     日本語     русский     简体中文     español
@ 2015 - 2018  [ Home ][ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]