[KEMET]

GMC

• Metallized polyethylene naphthalate (PEN) SMD
• According to IEC 60384-23

typiCal appliCations
  Bypassing, signal coupling. General purpose for highest reliability. High temperature service.
 
ConstruCtion
  Polyethylene naphthalate (PEN) film capacitor for surface mounting.
  Encapsulation in self-extinguishing material meeting the requirements of UL 94V-0.

Overview
The LC7152, 7152M, 7152NM, 7152KM are universal dual-PLL frequency synthesizers for use in weak signal type cordless telephone applications in the USA, South Korea, and Japan, and broadcast satellite (BS) tuners in the USA and Europe.

Features
. Dual charge pump built in for fast channel switching
. Digital lock detector enables PLL lock status check with crystal oscillator precision
. Programmable reference frequency divider supports various applications
. The LC7152NM is a built-in power-on reset circuit version of the LC7152M
. The LC7152KM is an enhanced frequency characteristics version of the LC7152M

Features
•  Available in mono and stereo versions
•  Two and three conductor versions
•  Quick toassemble
•  Rugged all metal housing

GENERAL DESCRIPTION
The Ai7152S is a high performance CCD image signal processor for color video camera. It includes MCU, timing generator, 2 channel 10bit digital to analog converter and all other functions for camera system. Supports 250K/380K NTSC system CCD sensors and 290K/410K PAL system CCD sensors with complementary color filter. It also provided programmable OSD function for convenient camera setup. DNR function provide clean image even in low light condition.

FEATURES
• Support Ye, Cyan, Magenta, Green complementary color filter CCD sensors for
   NTSC : Ai338, Ai325CA, ICX632, ICX638, RJ2315, RJ2355
   PAL : Ai339, Ai329CA , ICX633, ICX639, RJ2325, RJ2365
• Support external EEPROM to store parameter.
• Video Adjustment ( brightness, contrast, sharpness, saturation, gamma, hue )
• Built-in auto white balance control.
• Color rolling, breathing compensation
• Built-in auto exposure control.
• Built-in Motion Detection
• Built-in Privacy Mask Function
• 2x, 4x Digital Zoom Function
• Built-in Digital Noise Reduction.
• Built-in 2-channel 10bit digital to analog converter.
• Built-in mirror function.
• Built-in blemish compensation circuit storing the data in EEPROM.
• Support composite / YC separate analog video output and BT.656 digital output.
• Built-in timing generator for vertical driver and CDS/AGC/ADC peripheral chips.
• Support line lock function.
• Single 3.3V power supply. ( Horizontal drive pins can be 3.3V/5V )
• LQFP-80. ( 0.4mm pin pitch )
• Support user Definable GPIO.
• Programmable CCD Timing Driving Current.
• Programmable pull-up GPIO pin

Features:
• Built–In Power Transistor NPN Triple Diffused Planar
• On–Line SMPS for Color TV
• Output Voltage is Pre–Fixed – No External Adjustment is Required

DESCRIPTION
Solid-Electrolyte TANTALEX® capacitors to military specification MIL-PRF-39003 - Exponential and Weibull Distribution: Hermetically sealed, metal cased, axial leaded tubular capacitors manufactured as military style CSR13. These capacitors are furnished to the requirements of the military specification, including marking, testing and inspection.
In accordance with the specification, all capacitors are marked with the military part number (M39003/xx-xxxx) rather than the older style designation (CSRxxxxxxxx) and should be ordered as such. All capacitors covered by MIL-PRF-39003 are now ordered with the military part number as illustrated in the Part Numbering System chart. Capacitors must not be ordered using the style number identification.
MIL-PRF-39003 establishes failure rates (expressed in percent per 1000 h) based on exponential and Weibull distribution. Care must be exercised in ordering to insure the part number correctly identifies the desired failure rate level.
In addition, each order for military style CSR13, CSR21, CSR23 capacitors requiring government inspection must state whether inspection is to be at the destination or at the Vishay Sprague plant. Orders requiring source inspection cannot be shipped until this has been accomplished.
Style CS13 capacitors previously shown in MIL-C-26655 are directly replaced by style CSR13 and style CSR23 capacitors are extended capacitance range versions of military style CSR13.
For information on the performance characteristics of these capacitors, please refer to the latest issue of the military specification.

FEATURES
• Hermetically sealed
• Metal cased
• Axial lead
• Weibull failure rates G, B, C, D
• Exponential failure rates M, P, R, S
• Tape and reel available per EIA-296 standard

Infrared detector module with preamp Metal dewar type
High sensitivity modules of easy-to-use

These devices combine a dewar type detector with a compatible preamplifier, and easily operate to detect infrared radiation just by connecting to a DC power supply. InGaAs, InSb and MCT (HgCdTe) detectors are provided as standard devices (liquid nitrogen cooling). Custom-designed devices with different active areas, FOV or amplifier gain, etc. are also available to meet your specific needs.

Features
● Compact integral detector unit
● Optimum connections between the detector element and preamplifier allow amplified signals to be easily obtained.

Applications
● Infrared detection

[WIHA]

The ideal multi-purpose bits for all around quality and performance
Made in Germany - Production Quality

Impact resistant modified chrome-vanadium-molybdenum, tool steel, hardened
Suitable for all applications Hardness HRC 59-61 Suitable for both manual & machine applications

High resistant to wear and tear for a long tool life

DESCRIPTION
The TK715xx is a low dropout linear regulator housed in a small SOT-23-3 package, rated at 350 mW. An internal PNP transistor is used to achieve a low dropout voltage of 105 mV (typ.) at 50 mA load current. This device offers high precision output voltage of ±2.0 % or ±60 mV. The TK715xx has a very low quiescent current of 25 µA (typ.) at no load.

FEATURES
■High Voltage Precision at ±2.0% or ±60 mV
■Very Low Quiescent Current
■Very Low Dropout Voltage
■Reverse Bias Protection
■Miniature Package (SOT-23-3)
■Short Circuit Protection
■High Ripple Rejection

APPLICATIONS
■Battery Powered Systems
■Cellular Telephones
■Pagers
■Personal Communications Equipment
■Portable Instrumentation
■Portable Consumer Equipment
■Radio Control Systems
■Toys
■Low Voltage Systems

Overview
The LC7152, 7152M, 7152NM, 7152KM are universal dual-PLL frequency synthesizers for use in weak signal type cordless telephone applications in the USA, South Korea, and Japan, and broadcast satellite (BS) tuners in the USA and Europe.

Features
. Dual charge pump built in for fast channel switching
. Digital lock detector enables PLL lock status check with crystal oscillator precision
. Programmable reference frequency divider supports various applications
. The LC7152NM is a built-in power-on reset circuit version of the LC7152M
. The LC7152KM is an enhanced frequency characteristics version of the LC7152M