Integrated circuits, Transistor, Semiconductors Free Datasheet Search and Download Site

995

  

Datasheet

Match, Like 9956
Start with 9956*
End *1995 *A995 *2995 *X995 *F995 *4995 *8995 *K995 *6995 *9995 *D995 *N995 *3995 *5995 *B995 *7995 *E995 *0995 *-995 *M995 *R995 *L995 *P995 *W995 *S995 *I995 *U995 *Z995 *G995
Included *995* *995(* *995-* *9950* *9951* *9952* *9953* *9954* *9955* *9956* *9957* *9958* *9959* *995A* *995B* *995C* *995D* *995E* *995F* *995G* *995H* *995J* *995K* *995L* *995M* *995N* *995P* *995R* *995S* *995T* *995U* *995W* *995X* *995Y*
View Details    
MAX9951DCCB-D [Dual Per-Pin Parametric Measurement Units ]

other parts : MAX9951  MAX9952  MAX9951DCCB-TD  MAX9951FCCB-T  MAX9951FCCB-D  MAX9951FCCB-TD  MAX9952DCCB-T 

MaximIC
Maxim Integrated

General Description
The MAX9951/MAX9952 dual parametric measurement units (PMUs) feature a small package size, wide force and measurement range, and high accuracy, making the devices ideal for automatic test equipment (ATE) and other instrumentation that requires a PMU per pin or per site.
The MAX9951/MAX9952 force or measure voltages in the -2V to +7V through -7V to +13V ranges, dependent upon the supply voltage (VCC and VEE). The devices handle supply voltages of up to +30V (VCC to VEE) and a 20V device-under-test (DUT) voltage swing at full current. The MAX9951/MAX9952 also force or measure currents up to ±64mA with a lowest full-scale range of ±2µA. Integrated support circuitry facilitates use of an external buffer ampli fier for current ranges greater than ±64mA.

Features
♦ Force Voltage/Measure Current (FVMI)
♦ Force Current/Measure Voltage (FIMV)
♦ Force Voltage/Measure Voltage (FVMV)
♦ Force Current/Measure Current (FIMI)
♦ Force Nothing/Measure Voltage (FNMV)
♦ Force Nothing/Measure Current (FNMI, Range E Only)
♦ Termination/Measure Current
♦ Termination/Measure Voltage
♦ Five Programmable Current Ranges
     ±20µA
     ±20µA
     ±200µA
     ±2mA
     ±64mA
♦ -2V to +7V Through -7V to +13V Input-Voltage Range
♦ Force-Current/Measure-Current Adjustable Voltage Offset (IOS)
♦ Programmable Voltage Clamps at Force Output
♦ Low-Leakage, High-Impedance Measure, and Force States
♦ 3-Wire Serial Interface
♦ Low 6mA (max) Quiescent Current per PMU

View
5962-9959101QPA [TRIPLE PROCESSOR SUPERVISORS ]

other parts : TPS3307-18M  5962-9959101Q2A  TPS3307-18MFKB  TPS3307-18MJG  TPS3307-18MJGB 

TI
Texas Instruments

description
The TPS3307-18 is a micropower supply voltage supervisor designed for circuit initialization primarily in automotive DSP and processor-based systems, which require more than one supply voltage.
The TPS3307-18 is designed for monitoring three independent supply voltages: 3.3 V/1.8 V/adj,. The adjustable SENSE input allows the monitoring of any supply voltage >1.25 V.
The various supply voltage supervisors are designed to monitor the nominal supply voltage as shown in the following supply voltage monitoring table.

● Qualified for Military Applications
● ESD Protection Exceeds 2000 V Per
   MIL-STD-883, Method 3015; Exceeds 200 V
   Using Machine Model (C = 200 pF, R = 0)
● Triple Supervisory Circuits for DSP and
   Processor-Based Systems
● Power-On Reset Generator with Fixed
   Delay Time of 200 ms, No External
   Capacitor Needed
● Temperature-Compensated Voltage
   Reference
● Maximum Supply Current of 40 µA
● Supply Voltage Range . . . 2 V to 6 V
● Defined RESET Output from VDD ≥ 1.1 V
● CDIP-8 and LCCC-20 Packages
● Temperature Range . . . −55°C to 125°C

typical applications
Figure 1 lists some of the typical applications for the TPS3307 family, and a schematic diagram for a processor-based system application. This application uses TI part numbers TPS3307−18 and SMJ320C6201B.
● Military applications using DSPs,
   Microcontrollers or Microprocessors
● Industrial Equipment
● Programmable Controls

View
5962F9955802VXC [Radiation Hardened High-Speed, Dual Output PWM ]

other parts : 5962F9955801QEC  5962F9955801QXC  5962F9955801V9A  5962F9955801VEC  5962F9955801VXC  5962F9955802V9A  5962F9955802VEC 

Intersil
Intersil

The Radiation Hardened HS-1825ARH, HS-1825AEH Pulse Width Modulator is designed to be used in high frequency switched-mode power supplies and can be used in either current-mode or voltage-mode. It is well suited for single-ended boost converter applications.

Features
• Electrically Screened to DLA SMD # 5962-99558
• QML Qualified per MIL-PRF-38535 Requirements
• Radiation Environment
- Maximum Total Dose. . . . . . . . . . . . . . . . . . . .  300 krad(SI)
- Vertical Architecture Provides Low Dose Rate Immunity
- DI RSG Process Provides Latch-Up Immunity
• Low Start-Up Current . . . . . . . . . . . . . . . . . . . . . . . 100µA (Typ)
• Fast Propagation Delay . . . . . . . . . . . . . . . . . . . . . . . 80ns (Typ)
• 12V to 30V Operation
• 1A (Peak) Dual Output Drive Capability
•5.1V Reference
•Undervoltage Lockout
•Programmable Soft-Start
• Switching Frequencies to 500kHz
• Latched Overcurrent Comparator with Full Cycle Restart
• Programmable Leading Edge Blanking Circuit

View
JANTXV1N3995AAE3 [10 Watt Zener Diodes ]

other parts : 1N2970BB  1N2970BBE3  1N2970BE3  1N2970BR  1N2970BRB  1N2970BRBE3  1N2970BRE3 

Microsemi
Microsemi Corporation

DESCRIPTION
The JEDEC registered 1N2970B through 1N3015B and 1N3993A through 1N3998A series are 10W Zener diodes with voltage regulation values between 3.9 and 200V. They are available in JAN, JANTX, and JANTXV military qualification grades on most voltage values.

FEATURES
•  Internal solder bond construction.
•  Hermetically sealed (welded).
•  Zener regulation voltages from 3.9 V to 200 V.
•  Standard and reverse polarities are available.
•  Consult factory for surface mount equivalents.
•  JAN, JANTX, and JANTXV qualifications are available per MIL-PRF-19500/124.
•  RoHS compliant devices available by adding “e3” suffix (commercial grade only).

 

View
5962R9950402V9A [Low Power Quad Operational Amplifiers ]

other parts : 5962R9950401V9A  5962R9950401VCA  5962R9950401VDA  5962R9950401VZA  5962R9950402VCA  5962R9950402VDA  5962R9950402VZA 

Texas-Instruments
Texas Instruments

General Description
The LM124/124A consists of four independent, high gain, in ternally frequency compensated operational amplifiers which
were designed specifically to operate from a single power supply over a wide range of voltages. Operation from split power supplies is also possible and the low power supply current drain is independent of the magnitude of the power supply voltage.

Features
■ Available with Radiation Guarantee
— High Dose Rate 100 krad(Si)
— ELDRS Free 100 krad(Si)
■ Internally frequency compensated for unity gain
■ Large DC voltage gain  100 dB
■ Wide bandwidth (unity gain)  1 MHz(temperature compensated)
■ Wide power supply range:  Single supply  3V to 32V  or dual supplies  ±1.5V to ±16V
■ Very low supply current drain (700 μA)—essentially independent of supply voltage
■ Low input biasing current  45 nA (temperature compensated)
■ Low input offset voltage  2 mV and offset current:  5 nA
■ Input common-mode voltage range includes ground
■ Differential input voltage range equal to the power supply voltage
■ Large output voltage swing  0V to V+ − 1.5V

Advantages
■ Eliminates need for dual supplies
■ Four internally compensated op amps in a single package
■ Allows directly sensing near GND and VOUT also goes to GND
■ Compatible with all forms of logic
■ Power drain suitable for battery operation

View
5962-89957012A [Switched Mode Controller for DC Motor Drive ]

other parts : 5962-8995701VA  UC1637  UC1637J  UC1637J883B  UC1637L  UC1637L883B  UC2637 

TI
Texas Instruments

DESCRIPTION
The UC1637 is a pulse width modulator circuit intended to be used for a variety of PWM motor drive and amplifier applications requiring either uni-directional or bi-directional drive circuits. When used to replace conventional drivers, this circuit can increase efficiency and reduce component costs for many applications. All necessary circuitry is included to generate an analog error signal and modulate two bi-directional pulse train outputs in proportion to the error signal magnitude and polarity.

FEATURES
• Single or Dual Supply Operation
• ±2.5V to ±20V Input Supply Range
• ±5% Initial Oscillator Accuracy; ±10% Over Temperature
• Pulse-by-Pulse Current Limiting
• Under-Voltage Lockout
• Shutdown Input with Temperature Compensated 2.5V Threshold
• Uncommitted PWM Comparators for Design Flexibility
• Dual 100mA, Source/Sink Output Drivers

View
JANTXV1N2995BR [10 Watt Zener Diodes ]

other parts : 1N2970BB  1N2970BBE3  1N2970BE3  1N2970BR  1N2970BRB  1N2970BRBE3  1N2970BRE3 

Microsemi
Microsemi Corporation

DESCRIPTION
The JEDEC registered 1N2970B through 1N3015B and 1N3993A through 1N3998A series are 10W Zener diodes with voltage regulation values between 3.9 and 200V. They are available in JAN, JANTX, and JANTXV military qualification grades on most voltage values.

FEATURES
•  Internal solder bond construction.
•  Hermetically sealed (welded).
•  Zener regulation voltages from 3.9 V to 200 V.
•  Standard and reverse polarities are available.
•  Consult factory for surface mount equivalents.
•  JAN, JANTX, and JANTXV qualifications are available per MIL-PRF-19500/124.
•  RoHS compliant devices available by adding “e3” suffix (commercial grade only).

 

View
MAX9951FCCB-TD [Dual Per-Pin Parametric Measurement Units ]

other parts : MAX9951  MAX9952  MAX9951DCCB-D  MAX9951DCCB-TD  MAX9951FCCB-T  MAX9951FCCB-D  MAX9952DCCB-T 

MaximIC
Maxim Integrated

General Description
The MAX9951/MAX9952 dual parametric measurement units (PMUs) feature a small package size, wide force and measurement range, and high accuracy, making the devices ideal for automatic test equipment (ATE) and other instrumentation that requires a PMU per pin or per site.
The MAX9951/MAX9952 force or measure voltages in the -2V to +7V through -7V to +13V ranges, dependent upon the supply voltage (VCC and VEE). The devices handle supply voltages of up to +30V (VCC to VEE) and a 20V device-under-test (DUT) voltage swing at full current. The MAX9951/MAX9952 also force or measure currents up to ±64mA with a lowest full-scale range of ±2µA. Integrated support circuitry facilitates use of an external buffer ampli fier for current ranges greater than ±64mA.

Features
♦ Force Voltage/Measure Current (FVMI)
♦ Force Current/Measure Voltage (FIMV)
♦ Force Voltage/Measure Voltage (FVMV)
♦ Force Current/Measure Current (FIMI)
♦ Force Nothing/Measure Voltage (FNMV)
♦ Force Nothing/Measure Current (FNMI, Range E Only)
♦ Termination/Measure Current
♦ Termination/Measure Voltage
♦ Five Programmable Current Ranges
     ±20µA
     ±20µA
     ±200µA
     ±2mA
     ±64mA
♦ -2V to +7V Through -7V to +13V Input-Voltage Range
♦ Force-Current/Measure-Current Adjustable Voltage Offset (IOS)
♦ Programmable Voltage Clamps at Force Output
♦ Low-Leakage, High-Impedance Measure, and Force States
♦ 3-Wire Serial Interface
♦ Low 6mA (max) Quiescent Current per PMU

View
MAX9952DCCB-TD [Dual Per-Pin Parametric Measurement Units ]

other parts : MAX9951  MAX9952  MAX9951DCCB-D  MAX9951DCCB-TD  MAX9951FCCB-T  MAX9951FCCB-D  MAX9951FCCB-TD 

MaximIC
Maxim Integrated

General Description
The MAX9951/MAX9952 dual parametric measurement units (PMUs) feature a small package size, wide force and measurement range, and high accuracy, making the devices ideal for automatic test equipment (ATE) and other instrumentation that requires a PMU per pin or per site.
The MAX9951/MAX9952 force or measure voltages in the -2V to +7V through -7V to +13V ranges, dependent upon the supply voltage (VCC and VEE). The devices handle supply voltages of up to +30V (VCC to VEE) and a 20V device-under-test (DUT) voltage swing at full current. The MAX9951/MAX9952 also force or measure currents up to ±64mA with a lowest full-scale range of ±2µA. Integrated support circuitry facilitates use of an external buffer ampli fier for current ranges greater than ±64mA.

Features
♦ Force Voltage/Measure Current (FVMI)
♦ Force Current/Measure Voltage (FIMV)
♦ Force Voltage/Measure Voltage (FVMV)
♦ Force Current/Measure Current (FIMI)
♦ Force Nothing/Measure Voltage (FNMV)
♦ Force Nothing/Measure Current (FNMI, Range E Only)
♦ Termination/Measure Current
♦ Termination/Measure Voltage
♦ Five Programmable Current Ranges
     ±20µA
     ±20µA
     ±200µA
     ±2mA
     ±64mA
♦ -2V to +7V Through -7V to +13V Input-Voltage Range
♦ Force-Current/Measure-Current Adjustable Voltage Offset (IOS)
♦ Programmable Voltage Clamps at Force Output
♦ Low-Leakage, High-Impedance Measure, and Force States
♦ 3-Wire Serial Interface
♦ Low 6mA (max) Quiescent Current per PMU

View
JAN1N3995AE3 [10 Watt Zener Diodes ]

other parts : 1N2970BB  1N2970BBE3  1N2970BE3  1N2970BR  1N2970BRB  1N2970BRBE3  1N2970BRE3 

Microsemi
Microsemi Corporation

DESCRIPTION
The JEDEC registered 1N2970B through 1N3015B and 1N3993A through 1N3998A series are 10W Zener diodes with voltage regulation values between 3.9 and 200V. They are available in JAN, JANTX, and JANTXV military qualification grades on most voltage values.

FEATURES
•  Internal solder bond construction.
•  Hermetically sealed (welded).
•  Zener regulation voltages from 3.9 V to 200 V.
•  Standard and reverse polarities are available.
•  Consult factory for surface mount equivalents.
•  JAN, JANTX, and JANTXV qualifications are available per MIL-PRF-19500/124.
•  RoHS compliant devices available by adding “e3” suffix (commercial grade only).

 

View
1 2 3 4 5 6 7 8 9 10 Next

HOME




Language : 한국어     日本語     русский     简体中文     español
@ 2015 - 2018  [ Home ][ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]