Integrated circuits, Transistor, Semiconductors Free Datasheet Search and Download Site

A015

  

Datasheet

Match, Like N/A
Start with A015A*
End *0A015 *TA015 *5A015 *MA015 *PA015 *SA015 *UA015 *3A015 *CA015 *6A015 *NA015 *JA015 *8A015 *4A015 *2A015 *1A015
Included *A015* *A0150* *A0151* *A0152* *A0154* *A0155* *A0156* *A0157* *A0158* *A015B* *A015K* *A015T*
View Details    
MXD1013UA015 [3-in-1 Silicon Delay Line ]

other parts : MXD1013  MXD1013C  MXD1013C-D  MXD1013C/D  MXD1013C/D010  MXD1013C/D012  MXD1013C/D015 

MaximIC
Maxim Integrated

General Description
The MXD1013 contains three independent, monolithic, logic-buffered delay lines with delays ranging from 10ns to 200ns. Nominal accuracy is ±2ns for a 10ns to 60ns delay, ±3% for a 70ns to 100ns delay, and ±5% for a 150ns to 200ns delay. Relative to hybrid solutions, these devices offer enhanced performance and higher reliability, and reduce overall cost. Each output can drive up to ten standard 74LS loads.

Features
♦Improved Second Source to DS1013
♦Available in Space-Saving 8-Pin µMAX Package
♦20mA Supply Current (vs. Dallas’ 40mA)
♦Low Cost
♦Three Separate Buffered Delays
♦Delay Tolerance of ±2ns for MXD1013__010 through MXD1013__ 060
♦TTL/CMOS-Compatible Logic
♦Leading- and Trailing-Edge Accuracy
♦Custom Delays Available

View
B32653A0154J [Film Capacitors Metallized Polypropylene Film Capacitors (MKP) ]

other parts : B32651  B32651A7222J  B32651A7222J000  B32651A7222J189  B32651A7222J289  B32651A7222K  B32651A7222K000 

TDK
TDK Corporation

Features
■ High pulse strength
■ High contact reliability
■ RoHS-compatible
■ Halogen-free capacitors available on request

Typical applications
■ Electronic ballasts
■ Switch-mode power supplies

Construction
■ Dielectric: polypropylene (PP)
■ Wound capacitor technology with internal series connection for VR ≥1250 V DC
■ Plastic case (UL 94 V-0)
■ Epoxy resin sealing

Climatic
■ Max. operating temperature: 110 °C
■ Climatic category (IEC 60068-1): 55/100/56

View
DCA015 [High-Speed Switching Diode ] SANYO
SANYO -> Panasonic

Features
• Ideally suited for use in hybrid ICs because of very
   small-sized package.
• Fast switching speed.
• Economical because 2pcs, are contained.

View
B32653A0154K000 [Film Capacitors Metallized Polypropylene Film Capacitors (MKP) ]

other parts : B32651  B32651A7222J  B32651A7222J000  B32651A7222J189  B32651A7222J289  B32651A7222K  B32651A7222K000 

TDK
TDK Corporation

Features
■ High pulse strength
■ High contact reliability
■ RoHS-compatible
■ Halogen-free capacitors available on request

Typical applications
■ Electronic ballasts
■ Switch-mode power supplies

Construction
■ Dielectric: polypropylene (PP)
■ Wound capacitor technology with internal series connection for VR ≥1250 V DC
■ Plastic case (UL 94 V-0)
■ Epoxy resin sealing

Climatic
■ Max. operating temperature: 110 °C
■ Climatic category (IEC 60068-1): 55/100/56

View
B32656A0155J189 [Film Capacitors Metallized Polypropylene Film Capacitors (MKP) ]

other parts : B32651  B32651A7222J  B32651A7222J000  B32651A7222J189  B32651A7222J289  B32651A7222K  B32651A7222K000 

TDK
TDK Corporation

Features
■ High pulse strength
■ High contact reliability
■ RoHS-compatible
■ Halogen-free capacitors available on request

Typical applications
■ Electronic ballasts
■ Switch-mode power supplies

Construction
■ Dielectric: polypropylene (PP)
■ Wound capacitor technology with internal series connection for VR ≥1250 V DC
■ Plastic case (UL 94 V-0)
■ Epoxy resin sealing

Climatic
■ Max. operating temperature: 110 °C
■ Climatic category (IEC 60068-1): 55/100/56

View
B43511A0158M087 [Aluminum electrolytic capacitors ]

other parts : B43511  B43511A0108M000  B43511A0108M007  B43511A0108M080  B43511A0108M087  B43511A0158M000  B43511A0158M007 

Epcos
EPCOS AG

Capacitors with 4-pin snap-in terminals and solder pins
Outstanding ripple current - 85 °C

Long-life grade capacitors

Features
▪ Voltage derating (0.93 ▪ VR) enables 105 °C operation, more details available upon request
▪ Long useful life
▪ Outstanding ripple current capability
▪ High volumetric efficiency
▪ Many different case sizes
▪ Pinning ensures correct insertion
▪ RoHS-compatible

Applications
▪ Frequency converters
▪ Switch-mode power supplies in industrialand consumer electronics
▪ Uninterruptible power supplies

Construction
▪ Charge/discharge-proof, polar
▪ Aluminum case, fully insulated with PVC
▪ Version with additional PET insulation cap on terminal side available for insulating the capacitor from the PCB (B43511 only)
▪ Overload protection by safety vent in case

Terminals
▪ 4-pin snap-in terminals (6.3 mm and 4.5 mm length)
▪ Solder pin mounting on printed circuit boards, pins fit standardized spacings on PCB

View
B32654A0155K189 [Film Capacitors Metallized Polypropylene Film Capacitors (MKP) ]

other parts : B32651  B32651A7222J  B32651A7222J000  B32651A7222J189  B32651A7222J289  B32651A7222K  B32651A7222K000 

TDK
TDK Corporation

Features
■ High pulse strength
■ High contact reliability
■ RoHS-compatible
■ Halogen-free capacitors available on request

Typical applications
■ Electronic ballasts
■ Switch-mode power supplies

Construction
■ Dielectric: polypropylene (PP)
■ Wound capacitor technology with internal series connection for VR ≥1250 V DC
■ Plastic case (UL 94 V-0)
■ Epoxy resin sealing

Climatic
■ Max. operating temperature: 110 °C
■ Climatic category (IEC 60068-1): 55/100/56

View
B84143A0150R105 [3-line filters for converters and power electronics Rated current 8 to 150 A ]

other parts : B84143A0008R105  B84143A0016R105  B84143A0025R105  B84143A0036R105  B84143A0050R105  B84143A0066R105  B84143A0090R105 

Epcos
EPCOS AG

Power line filters for 3-phase systems
Rated voltage 520/300 V AC, 50/60 Hz
Rated current 8 to 150 A

Construction
■ 3-line filter
■ Metal case
■ Book size

Features
■ Excellent price/performance ratio
■ Ultra-compact design
■ Low weight
■ Easy to install
■ Optimized for long motor cables and operation under full load
■ ENEC10, UL and cUL approval

Applications
■ Frequency converters for motor drives, e.g.
  – elevators
  – pumps
  – traction systems
  – HVAC systems (heating, ventilation and air conditioning)
■ Power supplies

Terminals
■ Finger-safe terminal blocks

View
MXD1013PA015 [3-in-1 Silicon Delay Line ]

other parts : MXD1013  MXD1013C  MXD1013C-D  MXD1013C/D  MXD1013C/D010  MXD1013C/D012  MXD1013C/D015 

MaximIC
Maxim Integrated

General Description
The MXD1013 contains three independent, monolithic, logic-buffered delay lines with delays ranging from 10ns to 200ns. Nominal accuracy is ±2ns for a 10ns to 60ns delay, ±3% for a 70ns to 100ns delay, and ±5% for a 150ns to 200ns delay. Relative to hybrid solutions, these devices offer enhanced performance and higher reliability, and reduce overall cost. Each output can drive up to ten standard 74LS loads.

Features
♦Improved Second Source to DS1013
♦Available in Space-Saving 8-Pin µMAX Package
♦20mA Supply Current (vs. Dallas’ 40mA)
♦Low Cost
♦Three Separate Buffered Delays
♦Delay Tolerance of ±2ns for MXD1013__010 through MXD1013__ 060
♦TTL/CMOS-Compatible Logic
♦Leading- and Trailing-Edge Accuracy
♦Custom Delays Available

View
B43521A0158M000 [Aluminum electrolytic capacitors ]

other parts : B43511  B43511A0108M000  B43511A0108M007  B43511A0108M080  B43511A0108M087  B43511A0158M000  B43511A0158M007 

Epcos
EPCOS AG

Capacitors with 4-pin snap-in terminals and solder pins
Outstanding ripple current - 85 °C

Long-life grade capacitors

Features
▪ Voltage derating (0.93 ▪ VR) enables 105 °C operation, more details available upon request
▪ Long useful life
▪ Outstanding ripple current capability
▪ High volumetric efficiency
▪ Many different case sizes
▪ Pinning ensures correct insertion
▪ RoHS-compatible

Applications
▪ Frequency converters
▪ Switch-mode power supplies in industrialand consumer electronics
▪ Uninterruptible power supplies

Construction
▪ Charge/discharge-proof, polar
▪ Aluminum case, fully insulated with PVC
▪ Version with additional PET insulation cap on terminal side available for insulating the capacitor from the PCB (B43511 only)
▪ Overload protection by safety vent in case

Terminals
▪ 4-pin snap-in terminals (6.3 mm and 4.5 mm length)
▪ Solder pin mounting on printed circuit boards, pins fit standardized spacings on PCB

View
1 2 3 4 5 6 7 8 9

HOME




Language : 한국어     日本語     русский     简体中文     español
@ 2015 - 2018  [ Home ][ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]