Integrated circuits, Transistor, Semiconductors Free Datasheet Search and Download Site

CS6

  

Datasheet

Match, Like CS60
Start with CS6-* CS60* CS61* CS62* CS63* CS64* CS66*
End *8CS6 *1CS6 *2CS6 *RCS6 *WCS6 *9CS6 *3CS6 *5CS6 *0CS6 *6CS6 *VCS6 *4CS6 *FCS6 *DCS6 *ACS6 *BCS6 *TCS6 *ICS6 *LCS6 *PCS6 *JCS6 *7CS6 *NCS6 *-CS6
Included *CS6* *CS6-* *CS6/* *CS61* *CS62* *CS64* *CS66* *CS67* *CS68* *CS6A* *CS6D* *CS6G* *CS6P* *CS6T* *CS6V*
View Details    
M24C64-WCS6TPA [128 Kbit, 64 Kbit and 32 Kbit serial I²C bus EEPROM ]

other parts : M24128-BFCS3G  M24128-BFCS3P  M24C32WMW6T  M24C32WMW5T  M24C32WMW3T  M24C32WMW1T  M24128-BFCS3TG 

ST-Microelectronics
STMicroelectronics

Description
The M24C32, M24C64 and M24128 devices are I2C-compatible electrically erasable
programmable memories (EEPROM). They are organized as 4096 × 8 bits, 8192 × 8 bits and 16384 × 8 bits, respectively.
I2C uses a two-wire serial interface, comprising a bi-directional data line and a clock line.
The devices carry a built-in 4-bit Device Type Identifier code (1010) in accordance with the
I2C bus definition.


Features
■ Two-wire I2C serial interface supports 400 kHz protocol
■ Single supply voltages (see Table 1 for root part numbers):
– 2.5 V to 5.5 V
– 1.8 V to 5.5 V
– 1.7 V to 5.5 V
■ Write Control input
■ Byte and Page Write
■ Random and Sequential Read modes
■ Self-timed programming cycle
■ Automatic address incrementing
■ Enhanced ESD/latch-up protection
■ More than 1 Million write cycles
■ More than 40-year data retention
■ Packages
– ECOPACK® (RoHS compliant)

View
M24128BFCS6G [128 Kbit, 64 Kbit and 32 Kbit serial I²C bus EEPROM ]

other parts : M24128-BFCS3G  M24128-BFCS3P  M24C32WMW6T  M24C32WMW5T  M24C32WMW3T  M24C32WMW1T  M24128-BFCS3TG 

ST-Microelectronics
STMicroelectronics

Description
The M24C32, M24C64 and M24128 devices are I2C-compatible electrically erasable
programmable memories (EEPROM). They are organized as 4096 × 8 bits, 8192 × 8 bits and 16384 × 8 bits, respectively.
I2C uses a two-wire serial interface, comprising a bi-directional data line and a clock line.
The devices carry a built-in 4-bit Device Type Identifier code (1010) in accordance with the
I2C bus definition.


Features
■ Two-wire I2C serial interface supports 400 kHz protocol
■ Single supply voltages (see Table 1 for root part numbers):
– 2.5 V to 5.5 V
– 1.8 V to 5.5 V
– 1.7 V to 5.5 V
■ Write Control input
■ Byte and Page Write
■ Random and Sequential Read modes
■ Self-timed programming cycle
■ Automatic address incrementing
■ Enhanced ESD/latch-up protection
■ More than 1 Million write cycles
■ More than 40-year data retention
■ Packages
– ECOPACK® (RoHS compliant)

View
M24C64FCS6 [128 Kbit, 64 Kbit and 32 Kbit serial I²C bus EEPROM ]

other parts : M24128-BFCS3G  M24128-BFCS3P  M24C32WMW6T  M24C32WMW5T  M24C32WMW3T  M24C32WMW1T  M24128-BFCS3TG 

ST-Microelectronics
STMicroelectronics

Description
The M24C32, M24C64 and M24128 devices are I2C-compatible electrically erasable
programmable memories (EEPROM). They are organized as 4096 × 8 bits, 8192 × 8 bits and 16384 × 8 bits, respectively.
I2C uses a two-wire serial interface, comprising a bi-directional data line and a clock line.
The devices carry a built-in 4-bit Device Type Identifier code (1010) in accordance with the
I2C bus definition.


Features
■ Two-wire I2C serial interface supports 400 kHz protocol
■ Single supply voltages (see Table 1 for root part numbers):
– 2.5 V to 5.5 V
– 1.8 V to 5.5 V
– 1.7 V to 5.5 V
■ Write Control input
■ Byte and Page Write
■ Random and Sequential Read modes
■ Self-timed programming cycle
■ Automatic address incrementing
■ Enhanced ESD/latch-up protection
■ More than 1 Million write cycles
■ More than 40-year data retention
■ Packages
– ECOPACK® (RoHS compliant)

View
M95256-WCS6P/K [256 Kbit serial SPI bus EEPROM with high-speed clock ]

other parts : M95256  M95256-CS3G/A  M95256-CS3G/AB  M95256-CS3G/K  M95256-CS3P/A  M95256-CS3P/AB  M95256-CS3P/K 

ST-Microelectronics
STMicroelectronics

 Description
The M95256, M95256-W, M95256-R and M95256-DR are electrically erasable programmable memory (EEPROM) devices. They are accessed by a high speed SPI compatible bus. Their memory array is organized as 32768 × 8 bits. The M95256-DR also offers an additional page, named the Identification Page (64 bytes) which can be written and (later) permanently locked in Read-only mode. This Identification Page offers flexibility in the application board production line, as the Identification Page can be used to store unique identification parameters and/or parameters specific to the production line.

Features
■ Compatible with the Serial Peripheral Interface (SPI) bus
■ Memory array
– 256 Kb (32 Kbytes) of EEPROM
– Page size: 64 bytes
■ Additional Write lockable Page (Identification page)
■ Write
– Byte Write within 5 ms
– Page Write within 5 ms
■ Write Protect: quarter, half or whole memory array
■ High-speed clock frequency (20 MHz)
■ Single supply voltage: 1.8 V to 5.5 V
■ More than 1 Million Write cycles
■ More than 40-year data retention
■ Enhanced ESD Protection
■ Packages
–ECOPACK2® (RoHS compliant and Halogen-free)

View
EX64-PCS64I [ex Family FPGAs ]

other parts : EX128-FCS100  EX128-FCS100I  EX128-FCS100PP  EX128-FCS128  EX128-FCS128I  EX128-FCS128PP  EX128-FCS49 

ACTEL
Actel Corporation

General Description
The eX family of FPGAs is a low-cost solution for low-power, high-performance designs. The inherent low power attributes of the antifuse technology, coupled with an additional low static power mode, make these devices ideal for power-sensitive applications. Fabricated with an advanced 0.22µCMOS antifuse technology, these devices achieve high performance with no power penalty.

Features
• High-Performance, Low-Power Antifuse FPGA
• LP/Sleep Mode for Additional Power Savings
• Advanced Small-footprint Packages
• Hot-Swap Compliant I/Os
• Single-Chip Solution
• Nonvolatile
• Live on power up
• Power-Up/Down Friendly (No Sequencing Required for Supply Voltages)
• Configurable Weak-Resistor Pull-Up or Pull-Down for Tristated Outputs during Power Up
• Individual Output Slew Rate Control
• 2.5V, 3.3V, and 5.0V Mixed Voltage Operation with 5.0V Input Tolerance and 5.0V Drive Strength
• Software Design Support with Actel Designer Series and Libero Tools
• Up to 100% Resource Utilization with 100% Pin Locking
• Deterministic Timing
• Unique In-System Diagnostic and Verification Capability with Silicon Explorer II
• Boundary Scan Testing in Compliance with IEEE Standard 1149.1 (JTAG)
• Secure Programming Technology Prevents Reverse Engineering and Design Theft

Leading Edge Performance
•240 MHz System Performance
• 3.9ns Clock-to-Out (Pad-to-Pad)
• 350 MHz Internal Performance

Specifications
• 3,000 to 12,000 Available System Gates
• As Many as 512 Maximum Flip-Flops (Using CC Macros)
• 0.22µCMOS Process Technology
• Up to 132 User-Programmable I/O Pins

View
ICS601G-21T [LOW PHASE NOISE CLOCK MULTIPLIER ]

other parts : ICS601G-21 

ICST
Integrated Circuit Systems

Description
The ICS601-21 is a low-cost, low phase noise, high performance clock synthesizer for applications which require low phase noise and low jitter. It is ICS’ lowest phase noise multiplier. Using ICS’ patented analog and digital Phase Locked Loop (PLL) techniques, the chip accepts a 10 - 27 MHz crystal or clock input, and produces output clocks up to 220 MHz at 3.3 V.
This product is intended for clock generation. It has low output jitter (variation in the output period), but input to output skew and jitter are not defined nor guaranteed.

Features
• Fully integrated PLL, no external loop filter required
• Differential 3.3 V LVPECL outputs
• Uses fundamental 10 - 27 MHz crystal or clock
• Output clocks up to 220 MHz at 3.3 V
• Low phase noise: -122 dBc/Hz at 10 kHz
• Low jitter - 15 ps one sigma typ.
• Powerdown mode lowers power consumption
• Packaged in 16-pin TSSOP
• Advanced, low power, sub-micron CMOS process
• Operating voltage of 3.3 V
• Commercial temperature range available

View
RG23CS6VDC [GENERAL PURPOSE RELAY-TYPE RG2 ]

other parts : RG2-1A  RG2-1C  RG2-2A  RG2-2C  RG2-2C-S-24VDC  RG2-3A  RG2 

ADAM-TECH
Adam Technologies, Inc.

INTRODUCTION:
Adam Tech RG2 Relays are small general purpose relays available in eight different contact formats with either AC or DC coils and are available with PCB or Solder terminals. These relays are ideal for applications such as industrial control equipment, office machines, and medical equipment

FEATURES:
• Contact ratings up to 7 amps
• AC and DC coils available
• PCB & Solder Plug-in terminals

View
M24C64-RCS6PP [128 Kbit, 64 Kbit and 32 Kbit serial I²C bus EEPROM ]

other parts : M24128-BFCS3G  M24128-BFCS3P  M24C32WMW6T  M24C32WMW5T  M24C32WMW3T  M24C32WMW1T  M24128-BFCS3TG 

ST-Microelectronics
STMicroelectronics

Description
The M24C32, M24C64 and M24128 devices are I2C-compatible electrically erasable
programmable memories (EEPROM). They are organized as 4096 × 8 bits, 8192 × 8 bits and 16384 × 8 bits, respectively.
I2C uses a two-wire serial interface, comprising a bi-directional data line and a clock line.
The devices carry a built-in 4-bit Device Type Identifier code (1010) in accordance with the
I2C bus definition.


Features
■ Two-wire I2C serial interface supports 400 kHz protocol
■ Single supply voltages (see Table 1 for root part numbers):
– 2.5 V to 5.5 V
– 1.8 V to 5.5 V
– 1.7 V to 5.5 V
■ Write Control input
■ Byte and Page Write
■ Random and Sequential Read modes
■ Self-timed programming cycle
■ Automatic address incrementing
■ Enhanced ESD/latch-up protection
■ More than 1 Million write cycles
■ More than 40-year data retention
■ Packages
– ECOPACK® (RoHS compliant)

View
NT73CS6DC24 [Superminiature, High power. / Low coil power consumption. ]

other parts : JQC-3FC  NT73  NT73AS10DC12  NT73AS10DC12F  NT73AS10DC24  NT73AS10DC24F  NT73AS10DC3 

DBLECTRO
DB Lectro Inc

Features
■ Superminiature, High power.
■ Low coil power consumption.
■ PC board mounting.
■ Suitable for household appliance, automation system, electronic equipment, instrument and meter, communication facilities and remote control facilities.

View
M24128RCS6TGP [128 Kbit, 64 Kbit and 32 Kbit serial I²C bus EEPROM ]

other parts : M24128-BFCS3G  M24128-BFCS3P  M24C32WMW6T  M24C32WMW5T  M24C32WMW3T  M24C32WMW1T  M24128-BFCS3TG 

ST-Microelectronics
STMicroelectronics

Description
The M24C32, M24C64 and M24128 devices are I2C-compatible electrically erasable
programmable memories (EEPROM). They are organized as 4096 × 8 bits, 8192 × 8 bits and 16384 × 8 bits, respectively.
I2C uses a two-wire serial interface, comprising a bi-directional data line and a clock line.
The devices carry a built-in 4-bit Device Type Identifier code (1010) in accordance with the
I2C bus definition.


Features
■ Two-wire I2C serial interface supports 400 kHz protocol
■ Single supply voltages (see Table 1 for root part numbers):
– 2.5 V to 5.5 V
– 1.8 V to 5.5 V
– 1.7 V to 5.5 V
■ Write Control input
■ Byte and Page Write
■ Random and Sequential Read modes
■ Self-timed programming cycle
■ Automatic address incrementing
■ Enhanced ESD/latch-up protection
■ More than 1 Million write cycles
■ More than 40-year data retention
■ Packages
– ECOPACK® (RoHS compliant)

View
1 2 3 4 5 6 7 8 9 10 Next

HOME




Language : 한국어     日本語     русский     简体中文     español
@ 2015 - 2018  [ Home ][ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]