Integrated circuits, Transistor, Semiconductors Free Datasheet Search and Download Site


IC1741

  

Datasheet

Match, Like N/A
Start with IC1H* IC14* IC1B*
End *MIC1 *FIC1 *AIC1 *PIC1 *TIC1 *7IC1 *5IC1 *HIC1 *BIC1 *EIC1 *-IC1 *SIC1
Included *IC18* *IC13* *IC16* *IC10* *IC11* *IC15* *IC1E* *IC12* *IC14* *IC1X*
View Details    
PIC16C505-04 [14-Pin, 8-Bit CMOS Microcontroller ]

other parts : PIC16C505-04/JW  PIC16C505-04/P  PIC16C505-04E  PIC16C505-04E/JW  PIC16C505-04E/SL  PIC16C505-04I  PIC16C505-04I/  PIC16C505-04I/JW  PIC16C505-04I/P  PIC16C505-04I/SL 

Microchip
Microchip Technology

GENERAL DESCRIPTION
The PIC16C505 from Microchip Technology is a low cost, high-performance, 8-bit, fully static, EPROM/ROM-based CMOS microcontroller. It employs a RISC architecture with only 33 single word/single cycle instructions. All instructions are single cycle (200 µs) except for program branches, which take two cycles. The PIC16C505 delivers performance an order of magnitude higher than its competitors in the same price category. The 12-bit wide instructions are highly symmetrical resulting in a typical 2:1 code compression over other 8-bit microcontrollers in its class. The easy to use and easy to remember instruction set reduces development time significantly.

High-Performance RISC CPU:
• Only 33 instructions to learn
• Operating speed:
   - DC - 20 MHz clock input
   - DC - 200 ns instruction cycle
• Direct, indirect and relative addressing modes for
   data and instructions
• 12-bit wide instructions
• 8-bit wide data path
• 2-level deep hardware stack
• Eight special function hardware registers
• Direct, indirect and relative addressing modes for
   data and instructions
• All single cycle instructions (200 ns) except for
   program branches which are two-cycle

Peripheral Features:
• 11 I/O pins with individual direction control
• 1 input pin
• High current sink/source for direct LED drive
• Timer0: 8-bit timer/counter with 8-bit
   programmable prescaler

Special Microcontroller Features:
• In-Circuit Serial Programming (ICSP™)
• Power-on Reset (POR)
• Device Reset Timer (DRT)
• Watchdog Timer (WDT) with dedicated on-chip
   RC oscillator for reliable operation
• Programmable Code Protection
• Internal weak pull-ups on I/O pins
• Wake-up from Sleep on pin change
• Power-saving Sleep mode
• Selectable oscillator options:
   - INTRC: Precision internal 4 MHz oscillator
   - EXTRC: External low-cost RC oscillator
   - XT: Standard crystal/resonator
   - HS: High speed crystal/resonator
   - LP: Power saving, low frequency crystal

CMOS Technology:
• Low-power, high-speed CMOS EPROM technology
• Fully static design
• Wide operating voltage range (2.5V to 5.5V)
• Wide temperature ranges
   - Commercial: 0°C to +70°C
   - Industrial: -40°C to +85°C
   - Extended: -40°C to +125°C
   - < 1.0 µA typical standby current @ 5V
• Low power consumption
   - < 2.0 mA @ 5V, 4 MHz
   - 15 µA typical @ 3.0V, 32 kHz for TMR0
      running in SLEEP mode
   - < 1.0 µA typical standby current @ 5V

View
PIC16C505-04/JW [14-Pin, 8-Bit CMOS Microcontroller ]

other parts : PIC16C505-04  PIC16C505-04/P  PIC16C505-04E  PIC16C505-04E/JW  PIC16C505-04E/SL  PIC16C505-04I  PIC16C505-04I/  PIC16C505-04I/JW  PIC16C505-04I/P  PIC16C505-04I/SL 

Microchip
Microchip Technology

GENERAL DESCRIPTION
The PIC16C505 from Microchip Technology is a low cost, high-performance, 8-bit, fully static, EPROM/ROM-based CMOS microcontroller. It employs a RISC architecture with only 33 single word/single cycle instructions. All instructions are single cycle (200 µs) except for program branches, which take two cycles. The PIC16C505 delivers performance an order of magnitude higher than its competitors in the same price category. The 12-bit wide instructions are highly symmetrical resulting in a typical 2:1 code compression over other 8-bit microcontrollers in its class. The easy to use and easy to remember instruction set reduces development time significantly.

High-Performance RISC CPU:
• Only 33 instructions to learn
• Operating speed:
   - DC - 20 MHz clock input
   - DC - 200 ns instruction cycle
• Direct, indirect and relative addressing modes for
   data and instructions
• 12-bit wide instructions
• 8-bit wide data path
• 2-level deep hardware stack
• Eight special function hardware registers
• Direct, indirect and relative addressing modes for
   data and instructions
• All single cycle instructions (200 ns) except for
   program branches which are two-cycle

Peripheral Features:
• 11 I/O pins with individual direction control
• 1 input pin
• High current sink/source for direct LED drive
• Timer0: 8-bit timer/counter with 8-bit
   programmable prescaler

Special Microcontroller Features:
• In-Circuit Serial Programming (ICSP™)
• Power-on Reset (POR)
• Device Reset Timer (DRT)
• Watchdog Timer (WDT) with dedicated on-chip
   RC oscillator for reliable operation
• Programmable Code Protection
• Internal weak pull-ups on I/O pins
• Wake-up from Sleep on pin change
• Power-saving Sleep mode
• Selectable oscillator options:
   - INTRC: Precision internal 4 MHz oscillator
   - EXTRC: External low-cost RC oscillator
   - XT: Standard crystal/resonator
   - HS: High speed crystal/resonator
   - LP: Power saving, low frequency crystal

CMOS Technology:
• Low-power, high-speed CMOS EPROM technology
• Fully static design
• Wide operating voltage range (2.5V to 5.5V)
• Wide temperature ranges
   - Commercial: 0°C to +70°C
   - Industrial: -40°C to +85°C
   - Extended: -40°C to +125°C
   - < 1.0 µA typical standby current @ 5V
• Low power consumption
   - < 2.0 mA @ 5V, 4 MHz
   - 15 µA typical @ 3.0V, 32 kHz for TMR0
      running in SLEEP mode
   - < 1.0 µA typical standby current @ 5V

View
PIC16C505-04/P [14-Pin, 8-Bit CMOS Microcontroller ]

other parts : PIC16C505-04  PIC16C505-04/JW  PIC16C505-04E  PIC16C505-04E/JW  PIC16C505-04E/SL  PIC16C505-04I  PIC16C505-04I/  PIC16C505-04I/JW  PIC16C505-04I/P  PIC16C505-04I/SL 

Microchip
Microchip Technology

GENERAL DESCRIPTION
The PIC16C505 from Microchip Technology is a low cost, high-performance, 8-bit, fully static, EPROM/ROM-based CMOS microcontroller. It employs a RISC architecture with only 33 single word/single cycle instructions. All instructions are single cycle (200 µs) except for program branches, which take two cycles. The PIC16C505 delivers performance an order of magnitude higher than its competitors in the same price category. The 12-bit wide instructions are highly symmetrical resulting in a typical 2:1 code compression over other 8-bit microcontrollers in its class. The easy to use and easy to remember instruction set reduces development time significantly.

High-Performance RISC CPU:
• Only 33 instructions to learn
• Operating speed:
   - DC - 20 MHz clock input
   - DC - 200 ns instruction cycle
• Direct, indirect and relative addressing modes for
   data and instructions
• 12-bit wide instructions
• 8-bit wide data path
• 2-level deep hardware stack
• Eight special function hardware registers
• Direct, indirect and relative addressing modes for
   data and instructions
• All single cycle instructions (200 ns) except for
   program branches which are two-cycle

Peripheral Features:
• 11 I/O pins with individual direction control
• 1 input pin
• High current sink/source for direct LED drive
• Timer0: 8-bit timer/counter with 8-bit
   programmable prescaler

Special Microcontroller Features:
• In-Circuit Serial Programming (ICSP™)
• Power-on Reset (POR)
• Device Reset Timer (DRT)
• Watchdog Timer (WDT) with dedicated on-chip
   RC oscillator for reliable operation
• Programmable Code Protection
• Internal weak pull-ups on I/O pins
• Wake-up from Sleep on pin change
• Power-saving Sleep mode
• Selectable oscillator options:
   - INTRC: Precision internal 4 MHz oscillator
   - EXTRC: External low-cost RC oscillator
   - XT: Standard crystal/resonator
   - HS: High speed crystal/resonator
   - LP: Power saving, low frequency crystal

CMOS Technology:
• Low-power, high-speed CMOS EPROM technology
• Fully static design
• Wide operating voltage range (2.5V to 5.5V)
• Wide temperature ranges
   - Commercial: 0°C to +70°C
   - Industrial: -40°C to +85°C
   - Extended: -40°C to +125°C
   - < 1.0 µA typical standby current @ 5V
• Low power consumption
   - < 2.0 mA @ 5V, 4 MHz
   - 15 µA typical @ 3.0V, 32 kHz for TMR0
      running in SLEEP mode
   - < 1.0 µA typical standby current @ 5V

View
PIC16C505-04E [14-Pin, 8-Bit CMOS Microcontroller ]

other parts : PIC16C505-04  PIC16C505-04/JW  PIC16C505-04/P  PIC16C505-04E/JW  PIC16C505-04E/SL  PIC16C505-04I  PIC16C505-04I/  PIC16C505-04I/JW  PIC16C505-04I/P  PIC16C505-04I/SL 

Microchip
Microchip Technology

GENERAL DESCRIPTION
The PIC16C505 from Microchip Technology is a low cost, high-performance, 8-bit, fully static, EPROM/ROM-based CMOS microcontroller. It employs a RISC architecture with only 33 single word/single cycle instructions. All instructions are single cycle (200 µs) except for program branches, which take two cycles. The PIC16C505 delivers performance an order of magnitude higher than its competitors in the same price category. The 12-bit wide instructions are highly symmetrical resulting in a typical 2:1 code compression over other 8-bit microcontrollers in its class. The easy to use and easy to remember instruction set reduces development time significantly.

High-Performance RISC CPU:
• Only 33 instructions to learn
• Operating speed:
   - DC - 20 MHz clock input
   - DC - 200 ns instruction cycle
• Direct, indirect and relative addressing modes for
   data and instructions
• 12-bit wide instructions
• 8-bit wide data path
• 2-level deep hardware stack
• Eight special function hardware registers
• Direct, indirect and relative addressing modes for
   data and instructions
• All single cycle instructions (200 ns) except for
   program branches which are two-cycle

Peripheral Features:
• 11 I/O pins with individual direction control
• 1 input pin
• High current sink/source for direct LED drive
• Timer0: 8-bit timer/counter with 8-bit
   programmable prescaler

Special Microcontroller Features:
• In-Circuit Serial Programming (ICSP™)
• Power-on Reset (POR)
• Device Reset Timer (DRT)
• Watchdog Timer (WDT) with dedicated on-chip
   RC oscillator for reliable operation
• Programmable Code Protection
• Internal weak pull-ups on I/O pins
• Wake-up from Sleep on pin change
• Power-saving Sleep mode
• Selectable oscillator options:
   - INTRC: Precision internal 4 MHz oscillator
   - EXTRC: External low-cost RC oscillator
   - XT: Standard crystal/resonator
   - HS: High speed crystal/resonator
   - LP: Power saving, low frequency crystal

CMOS Technology:
• Low-power, high-speed CMOS EPROM technology
• Fully static design
• Wide operating voltage range (2.5V to 5.5V)
• Wide temperature ranges
   - Commercial: 0°C to +70°C
   - Industrial: -40°C to +85°C
   - Extended: -40°C to +125°C
   - < 1.0 µA typical standby current @ 5V
• Low power consumption
   - < 2.0 mA @ 5V, 4 MHz
   - 15 µA typical @ 3.0V, 32 kHz for TMR0
      running in SLEEP mode
   - < 1.0 µA typical standby current @ 5V

View
PIC16C505-04E/JW [14-Pin, 8-Bit CMOS Microcontroller ]

other parts : PIC16C505-04  PIC16C505-04/JW  PIC16C505-04/P  PIC16C505-04E  PIC16C505-04E/SL  PIC16C505-04I  PIC16C505-04I/  PIC16C505-04I/JW  PIC16C505-04I/P  PIC16C505-04I/SL 

Microchip
Microchip Technology

GENERAL DESCRIPTION
The PIC16C505 from Microchip Technology is a low cost, high-performance, 8-bit, fully static, EPROM/ROM-based CMOS microcontroller. It employs a RISC architecture with only 33 single word/single cycle instructions. All instructions are single cycle (200 µs) except for program branches, which take two cycles. The PIC16C505 delivers performance an order of magnitude higher than its competitors in the same price category. The 12-bit wide instructions are highly symmetrical resulting in a typical 2:1 code compression over other 8-bit microcontrollers in its class. The easy to use and easy to remember instruction set reduces development time significantly.

High-Performance RISC CPU:
• Only 33 instructions to learn
• Operating speed:
   - DC - 20 MHz clock input
   - DC - 200 ns instruction cycle
• Direct, indirect and relative addressing modes for
   data and instructions
• 12-bit wide instructions
• 8-bit wide data path
• 2-level deep hardware stack
• Eight special function hardware registers
• Direct, indirect and relative addressing modes for
   data and instructions
• All single cycle instructions (200 ns) except for
   program branches which are two-cycle

Peripheral Features:
• 11 I/O pins with individual direction control
• 1 input pin
• High current sink/source for direct LED drive
• Timer0: 8-bit timer/counter with 8-bit
   programmable prescaler

Special Microcontroller Features:
• In-Circuit Serial Programming (ICSP™)
• Power-on Reset (POR)
• Device Reset Timer (DRT)
• Watchdog Timer (WDT) with dedicated on-chip
   RC oscillator for reliable operation
• Programmable Code Protection
• Internal weak pull-ups on I/O pins
• Wake-up from Sleep on pin change
• Power-saving Sleep mode
• Selectable oscillator options:
   - INTRC: Precision internal 4 MHz oscillator
   - EXTRC: External low-cost RC oscillator
   - XT: Standard crystal/resonator
   - HS: High speed crystal/resonator
   - LP: Power saving, low frequency crystal

CMOS Technology:
• Low-power, high-speed CMOS EPROM technology
• Fully static design
• Wide operating voltage range (2.5V to 5.5V)
• Wide temperature ranges
   - Commercial: 0°C to +70°C
   - Industrial: -40°C to +85°C
   - Extended: -40°C to +125°C
   - < 1.0 µA typical standby current @ 5V
• Low power consumption
   - < 2.0 mA @ 5V, 4 MHz
   - 15 µA typical @ 3.0V, 32 kHz for TMR0
      running in SLEEP mode
   - < 1.0 µA typical standby current @ 5V

View
PIC16C505-04E/SL [14-Pin, 8-Bit CMOS Microcontroller ]

other parts : PIC16C505-04  PIC16C505-04/JW  PIC16C505-04/P  PIC16C505-04E  PIC16C505-04E/JW  PIC16C505-04I  PIC16C505-04I/  PIC16C505-04I/JW  PIC16C505-04I/P  PIC16C505-04I/SL 

Microchip
Microchip Technology

GENERAL DESCRIPTION
The PIC16C505 from Microchip Technology is a low cost, high-performance, 8-bit, fully static, EPROM/ROM-based CMOS microcontroller. It employs a RISC architecture with only 33 single word/single cycle instructions. All instructions are single cycle (200 µs) except for program branches, which take two cycles. The PIC16C505 delivers performance an order of magnitude higher than its competitors in the same price category. The 12-bit wide instructions are highly symmetrical resulting in a typical 2:1 code compression over other 8-bit microcontrollers in its class. The easy to use and easy to remember instruction set reduces development time significantly.

High-Performance RISC CPU:
• Only 33 instructions to learn
• Operating speed:
   - DC - 20 MHz clock input
   - DC - 200 ns instruction cycle
• Direct, indirect and relative addressing modes for
   data and instructions
• 12-bit wide instructions
• 8-bit wide data path
• 2-level deep hardware stack
• Eight special function hardware registers
• Direct, indirect and relative addressing modes for
   data and instructions
• All single cycle instructions (200 ns) except for
   program branches which are two-cycle

Peripheral Features:
• 11 I/O pins with individual direction control
• 1 input pin
• High current sink/source for direct LED drive
• Timer0: 8-bit timer/counter with 8-bit
   programmable prescaler

Special Microcontroller Features:
• In-Circuit Serial Programming (ICSP™)
• Power-on Reset (POR)
• Device Reset Timer (DRT)
• Watchdog Timer (WDT) with dedicated on-chip
   RC oscillator for reliable operation
• Programmable Code Protection
• Internal weak pull-ups on I/O pins
• Wake-up from Sleep on pin change
• Power-saving Sleep mode
• Selectable oscillator options:
   - INTRC: Precision internal 4 MHz oscillator
   - EXTRC: External low-cost RC oscillator
   - XT: Standard crystal/resonator
   - HS: High speed crystal/resonator
   - LP: Power saving, low frequency crystal

CMOS Technology:
• Low-power, high-speed CMOS EPROM technology
• Fully static design
• Wide operating voltage range (2.5V to 5.5V)
• Wide temperature ranges
   - Commercial: 0°C to +70°C
   - Industrial: -40°C to +85°C
   - Extended: -40°C to +125°C
   - < 1.0 µA typical standby current @ 5V
• Low power consumption
   - < 2.0 mA @ 5V, 4 MHz
   - 15 µA typical @ 3.0V, 32 kHz for TMR0
      running in SLEEP mode
   - < 1.0 µA typical standby current @ 5V

View
PIC16C505-04I [14-Pin, 8-Bit CMOS Microcontroller ]

other parts : PIC16C505-04  PIC16C505-04/JW  PIC16C505-04/P  PIC16C505-04E  PIC16C505-04E/JW  PIC16C505-04E/SL  PIC16C505-04I/  PIC16C505-04I/JW  PIC16C505-04I/P  PIC16C505-04I/SL 

Microchip
Microchip Technology

GENERAL DESCRIPTION
The PIC16C505 from Microchip Technology is a low cost, high-performance, 8-bit, fully static, EPROM/ROM-based CMOS microcontroller. It employs a RISC architecture with only 33 single word/single cycle instructions. All instructions are single cycle (200 µs) except for program branches, which take two cycles. The PIC16C505 delivers performance an order of magnitude higher than its competitors in the same price category. The 12-bit wide instructions are highly symmetrical resulting in a typical 2:1 code compression over other 8-bit microcontrollers in its class. The easy to use and easy to remember instruction set reduces development time significantly.

High-Performance RISC CPU:
• Only 33 instructions to learn
• Operating speed:
   - DC - 20 MHz clock input
   - DC - 200 ns instruction cycle
• Direct, indirect and relative addressing modes for
   data and instructions
• 12-bit wide instructions
• 8-bit wide data path
• 2-level deep hardware stack
• Eight special function hardware registers
• Direct, indirect and relative addressing modes for
   data and instructions
• All single cycle instructions (200 ns) except for
   program branches which are two-cycle

Peripheral Features:
• 11 I/O pins with individual direction control
• 1 input pin
• High current sink/source for direct LED drive
• Timer0: 8-bit timer/counter with 8-bit
   programmable prescaler

Special Microcontroller Features:
• In-Circuit Serial Programming (ICSP™)
• Power-on Reset (POR)
• Device Reset Timer (DRT)
• Watchdog Timer (WDT) with dedicated on-chip
   RC oscillator for reliable operation
• Programmable Code Protection
• Internal weak pull-ups on I/O pins
• Wake-up from Sleep on pin change
• Power-saving Sleep mode
• Selectable oscillator options:
   - INTRC: Precision internal 4 MHz oscillator
   - EXTRC: External low-cost RC oscillator
   - XT: Standard crystal/resonator
   - HS: High speed crystal/resonator
   - LP: Power saving, low frequency crystal

CMOS Technology:
• Low-power, high-speed CMOS EPROM technology
• Fully static design
• Wide operating voltage range (2.5V to 5.5V)
• Wide temperature ranges
   - Commercial: 0°C to +70°C
   - Industrial: -40°C to +85°C
   - Extended: -40°C to +125°C
   - < 1.0 µA typical standby current @ 5V
• Low power consumption
   - < 2.0 mA @ 5V, 4 MHz
   - 15 µA typical @ 3.0V, 32 kHz for TMR0
      running in SLEEP mode
   - < 1.0 µA typical standby current @ 5V

View
PIC16C505-04I/ [14-Pin, 8-Bit CMOS Microcontroller ]

other parts : PIC16C505-04  PIC16C505-04/JW  PIC16C505-04/P  PIC16C505-04E  PIC16C505-04E/JW  PIC16C505-04E/SL  PIC16C505-04I  PIC16C505-04I/JW  PIC16C505-04I/P  PIC16C505-04I/SL 

Microchip
Microchip Technology

GENERAL DESCRIPTION
The PIC16C505 from Microchip Technology is a low cost, high-performance, 8-bit, fully static, EPROM/ROM-based CMOS microcontroller. It employs a RISC architecture with only 33 single word/single cycle instructions. All instructions are single cycle (200 µs) except for program branches, which take two cycles. The PIC16C505 delivers performance an order of magnitude higher than its competitors in the same price category. The 12-bit wide instructions are highly symmetrical resulting in a typical 2:1 code compression over other 8-bit microcontrollers in its class. The easy to use and easy to remember instruction set reduces development time significantly.

High-Performance RISC CPU:
• Only 33 instructions to learn
• Operating speed:
   - DC - 20 MHz clock input
   - DC - 200 ns instruction cycle
• Direct, indirect and relative addressing modes for
   data and instructions
• 12-bit wide instructions
• 8-bit wide data path
• 2-level deep hardware stack
• Eight special function hardware registers
• Direct, indirect and relative addressing modes for
   data and instructions
• All single cycle instructions (200 ns) except for
   program branches which are two-cycle

Peripheral Features:
• 11 I/O pins with individual direction control
• 1 input pin
• High current sink/source for direct LED drive
• Timer0: 8-bit timer/counter with 8-bit
   programmable prescaler

Special Microcontroller Features:
• In-Circuit Serial Programming (ICSP™)
• Power-on Reset (POR)
• Device Reset Timer (DRT)
• Watchdog Timer (WDT) with dedicated on-chip
   RC oscillator for reliable operation
• Programmable Code Protection
• Internal weak pull-ups on I/O pins
• Wake-up from Sleep on pin change
• Power-saving Sleep mode
• Selectable oscillator options:
   - INTRC: Precision internal 4 MHz oscillator
   - EXTRC: External low-cost RC oscillator
   - XT: Standard crystal/resonator
   - HS: High speed crystal/resonator
   - LP: Power saving, low frequency crystal

CMOS Technology:
• Low-power, high-speed CMOS EPROM technology
• Fully static design
• Wide operating voltage range (2.5V to 5.5V)
• Wide temperature ranges
   - Commercial: 0°C to +70°C
   - Industrial: -40°C to +85°C
   - Extended: -40°C to +125°C
   - < 1.0 µA typical standby current @ 5V
• Low power consumption
   - < 2.0 mA @ 5V, 4 MHz
   - 15 µA typical @ 3.0V, 32 kHz for TMR0
      running in SLEEP mode
   - < 1.0 µA typical standby current @ 5V

View
PIC16C505-04I/JW [14-Pin, 8-Bit CMOS Microcontroller ]

other parts : PIC16C505-04  PIC16C505-04/JW  PIC16C505-04/P  PIC16C505-04E  PIC16C505-04E/JW  PIC16C505-04E/SL  PIC16C505-04I  PIC16C505-04I/  PIC16C505-04I/P  PIC16C505-04I/SL 

Microchip
Microchip Technology

GENERAL DESCRIPTION
The PIC16C505 from Microchip Technology is a low cost, high-performance, 8-bit, fully static, EPROM/ROM-based CMOS microcontroller. It employs a RISC architecture with only 33 single word/single cycle instructions. All instructions are single cycle (200 µs) except for program branches, which take two cycles. The PIC16C505 delivers performance an order of magnitude higher than its competitors in the same price category. The 12-bit wide instructions are highly symmetrical resulting in a typical 2:1 code compression over other 8-bit microcontrollers in its class. The easy to use and easy to remember instruction set reduces development time significantly.

High-Performance RISC CPU:
• Only 33 instructions to learn
• Operating speed:
   - DC - 20 MHz clock input
   - DC - 200 ns instruction cycle
• Direct, indirect and relative addressing modes for
   data and instructions
• 12-bit wide instructions
• 8-bit wide data path
• 2-level deep hardware stack
• Eight special function hardware registers
• Direct, indirect and relative addressing modes for
   data and instructions
• All single cycle instructions (200 ns) except for
   program branches which are two-cycle

Peripheral Features:
• 11 I/O pins with individual direction control
• 1 input pin
• High current sink/source for direct LED drive
• Timer0: 8-bit timer/counter with 8-bit
   programmable prescaler

Special Microcontroller Features:
• In-Circuit Serial Programming (ICSP™)
• Power-on Reset (POR)
• Device Reset Timer (DRT)
• Watchdog Timer (WDT) with dedicated on-chip
   RC oscillator for reliable operation
• Programmable Code Protection
• Internal weak pull-ups on I/O pins
• Wake-up from Sleep on pin change
• Power-saving Sleep mode
• Selectable oscillator options:
   - INTRC: Precision internal 4 MHz oscillator
   - EXTRC: External low-cost RC oscillator
   - XT: Standard crystal/resonator
   - HS: High speed crystal/resonator
   - LP: Power saving, low frequency crystal

CMOS Technology:
• Low-power, high-speed CMOS EPROM technology
• Fully static design
• Wide operating voltage range (2.5V to 5.5V)
• Wide temperature ranges
   - Commercial: 0°C to +70°C
   - Industrial: -40°C to +85°C
   - Extended: -40°C to +125°C
   - < 1.0 µA typical standby current @ 5V
• Low power consumption
   - < 2.0 mA @ 5V, 4 MHz
   - 15 µA typical @ 3.0V, 32 kHz for TMR0
      running in SLEEP mode
   - < 1.0 µA typical standby current @ 5V

View
PIC16C505-04I/P [14-Pin, 8-Bit CMOS Microcontroller ]

other parts : PIC16C505-04  PIC16C505-04/JW  PIC16C505-04/P  PIC16C505-04E  PIC16C505-04E/JW  PIC16C505-04E/SL  PIC16C505-04I  PIC16C505-04I/  PIC16C505-04I/JW  PIC16C505-04I/SL 

Microchip
Microchip Technology

GENERAL DESCRIPTION
The PIC16C505 from Microchip Technology is a low cost, high-performance, 8-bit, fully static, EPROM/ROM-based CMOS microcontroller. It employs a RISC architecture with only 33 single word/single cycle instructions. All instructions are single cycle (200 µs) except for program branches, which take two cycles. The PIC16C505 delivers performance an order of magnitude higher than its competitors in the same price category. The 12-bit wide instructions are highly symmetrical resulting in a typical 2:1 code compression over other 8-bit microcontrollers in its class. The easy to use and easy to remember instruction set reduces development time significantly.

High-Performance RISC CPU:
• Only 33 instructions to learn
• Operating speed:
   - DC - 20 MHz clock input
   - DC - 200 ns instruction cycle
• Direct, indirect and relative addressing modes for
   data and instructions
• 12-bit wide instructions
• 8-bit wide data path
• 2-level deep hardware stack
• Eight special function hardware registers
• Direct, indirect and relative addressing modes for
   data and instructions
• All single cycle instructions (200 ns) except for
   program branches which are two-cycle

Peripheral Features:
• 11 I/O pins with individual direction control
• 1 input pin
• High current sink/source for direct LED drive
• Timer0: 8-bit timer/counter with 8-bit
   programmable prescaler

Special Microcontroller Features:
• In-Circuit Serial Programming (ICSP™)
• Power-on Reset (POR)
• Device Reset Timer (DRT)
• Watchdog Timer (WDT) with dedicated on-chip
   RC oscillator for reliable operation
• Programmable Code Protection
• Internal weak pull-ups on I/O pins
• Wake-up from Sleep on pin change
• Power-saving Sleep mode
• Selectable oscillator options:
   - INTRC: Precision internal 4 MHz oscillator
   - EXTRC: External low-cost RC oscillator
   - XT: Standard crystal/resonator
   - HS: High speed crystal/resonator
   - LP: Power saving, low frequency crystal

CMOS Technology:
• Low-power, high-speed CMOS EPROM technology
• Fully static design
• Wide operating voltage range (2.5V to 5.5V)
• Wide temperature ranges
   - Commercial: 0°C to +70°C
   - Industrial: -40°C to +85°C
   - Extended: -40°C to +125°C
   - < 1.0 µA typical standby current @ 5V
• Low power consumption
   - < 2.0 mA @ 5V, 4 MHz
   - 15 µA typical @ 3.0V, 32 kHz for TMR0
      running in SLEEP mode
   - < 1.0 µA typical standby current @ 5V

View
1 2 3 4 5 6 7 8 9 10 Next
Share Link : 

HOME




Language : 한국어     日本語     русский     简体中文     español
@ 2015 - 2018  [ Home ][ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]