Integrated circuits, Transistor, Semiconductors Free Datasheet Search and Download Site

LM111

   Datasheet
Match, Like LM111 LM1112 LM1114 LM1117 LM111A LM111D LM111E LM111H LM111J LM111N LM111P LM111W
Start with LM111-* LM1112* LM1114* LM1117* LM111A* LM111D* LM111E* LM111F* LM111H* LM111J* LM111M* LM111N* LM111P* LM111Q* LM111W*
End N/A
Included N/A

LM111 [Differential Comparators ]

other parts : LM211  LM311  LM211Q  LM311D  LM111D  LM311P  LM111P  LM211P  LM211D  LM311PW 

TI
Texas Instruments

Description
The LM111, LM211, and LM311 devices are single high-speed voltage comparators. These devices are designed to operate from a wide range of power supply voltages, including ±15-V supplies for operational amplifiers and 5-V supplies for logic systems. The output levels are compatible with most TTL and MOS circuits. These comparators are capable of driving lamps or relays and switching voltages up to 50 V at 50 mA. All inputs and outputs can be isolated from system ground. The outputs can drive loads referenced to ground, VCC+ or VCC−. Offset balancing and strobe capabilities are available, and the outputs can be wire-OR connected. If the strobe is low, the output is in the off state, regardless of the differential input.

Features
• Fast Response Time: 165 ns
• Strobe Capability
• Maximum Input Bias Current: 300 nA
• Maximum Input Offset Current: 70 nA
• Can Operate From Single 5-V Supply
• Available in Q-Temp Automotive
   – High-Reliability Automotive Applications
   – Configuration Control and Print Support
   – Qualification to Automotive Standards
• On Products Compliant to MIL-PRF-38535,
   All Parameters Are Tested Unless Otherwise
   Noted. On All Other Products, Production
   Processing Does Not Necessarily Include Testing
   of All Parameters

Applications
• Desktop PCs
• Body Control Modules
• White Goods
• Building Automation
• Oscillators
• Peak Detectors

View
LM1117 [800mA Low-Dropout Linear Regulator ]

other parts : LM1117I  LM1117T-2.5  LM1117T-1.8  LM1117T-3.3  LM1117S-3.3  LM1117S-5.0  LM1117T-ADJ  LM1117S-ADJ  LM1117T-5.0  LM1117LD-ADJ 

National-Semiconductor
National ->Texas Instruments

General Description
The LM1117 is a series of low dropout voltage regulators with a dropout of 1.2V at 800mA of load current. It has the same pin-out as National Semiconductor’s industry standardLM317.
The LM1117 is available in an adjustable version, which can set the output voltage from 1.25V to 13.8V with only two external resistors. In addition, it is also available in five fixed voltages, 1.8V, 2.5V, 2.85V, 3.3V, and 5V.

Features
Available in 1.8V, 2.5V, 2.85V, 3.3V, 5V, and Adjustable Versions
Space Saving SOT-223 and LLP Packages
Current Limiting and Thermal Protection
Output Current 800mA
Line Regulation 0.2% (Max)
Load Regulation 0.4% (Max)
Temperature Range
— LM1117 0˚C to 125˚C
— LM1117I −40˚C to 125˚C

Applications
2.85V Model for SCSI-2 Active Termination
Post Regulator for Switching DC/DC Converter
High Efficiency Linear Regulators
Battery Charger
Battery Powered Instrumentation

View
LM1117 [800-mA Low-Dropout Linear Regulator ]

other parts : 1117-18  1117IAD  1117I50  1117I33  1117ADJ  1117-50  LM1117I  LM1117SADJ  LM1117S5.0  LM1117S3.3 

TI
Texas Instruments

General Description
The LM1117 is a series of low dropout voltage regulators with a dropout of 1.2V at 800mA of load current. It has the same pin-out as National Semiconductors industry standard LM317.
The LM1117 is available in an adjustable version, which can set the output voltage from 1.25V to 13.8V with only two external resistors. In addition, it is also available in five fixed voltages, 1.8V, 2.5V, 2.85V, 3.3V, and 5V.

Features
● Available in 1.8V, 2.5V, 2.85V, 3.3V, 5V, and Adjustable Versions
● Space Saving SOT-223 and LLP Packages
● Current Limiting and Thermal Protection
● Output Current 800mA
● Line Regulation 0.2% (Max)
● Load Regulation 0.4% (Max)
● Temperature Range
   — LM1117 0°C to 125°C
   — LM1117I −40°C to 125°C

Applications
● 2.85V Model for SCSI-2 Active Termination
● Post Regulator for Switching DC/DC Converter
● High Efficiency Linear Regulators
● Battery Charger
● Battery Powered Instrumentation

View
LM1117 [800mA Low-dropout Linear Regulator ]

other parts : LM1117-ADJ-252  LM1117-ADJ-220  LM1117-5.0-252  LM1117-5.0-223  LM1117-5.0-220  LM1117-3.3-252  LM1117-3.3-223  LM1117-3.3-220  LM1117-ADJ-223  LM1117-2.85-252 

Fci
First Components International

General Description
The LM1117 is a series of low dropout voltage regulators with a dropout of 1.2V at 800mA of load current. It has the same pin-out as National Semiconductor’s industry standard LM317.

Features
Available in 2.85V, 3.3V, 5V, and Adjustable Versions
Space Saving SOT-223 Package
Current Limiting and Thermal Protection
Output Current 800mA
Temperature Range 0˚C to 125˚C
Line Regulation 0.2%(Max)
Load Regulation 0.4%(Max)

Applications
2.85V Model for SCSI-2 Active Termination
Post Regulator for Switching DC/DC Converter
High Efficiency Linear Regulators
Battery Charger
Battery Powered Instrumentation

View
LM111A [Voltage Comparator ]

other parts : LT111AN8 

Linear
Linear Technology


View
LM111D [VOLTAGE COMPARATORS ] ST-Microelectronics
STMicroelectronics
The LM111, LM211, LM311 are voltage comparators that have low input currents. They are also designed to operate over a wide range of supply voltages: from standard ±15V operational amplifier supplies down to the single +5V supply used for IC logic.
View
LM111D [Differential Comparators ]

other parts : LM111  LM311  LM211  LM311P  LM111P  LM311D  LM211Q  LM211P  LM211D  LM311PW 

TI
Texas Instruments

Description
The LM111, LM211, and LM311 devices are single high-speed voltage comparators. These devices are designed to operate from a wide range of power supply voltages, including ±15-V supplies for operational amplifiers and 5-V supplies for logic systems. The output levels are compatible with most TTL and MOS circuits. These comparators are capable of driving lamps or relays and switching voltages up to 50 V at 50 mA. All inputs and outputs can be isolated from system ground. The outputs can drive loads referenced to ground, VCC+ or VCC−. Offset balancing and strobe capabilities are available, and the outputs can be wire-OR connected. If the strobe is low, the output is in the off state, regardless of the differential input.

Features
• Fast Response Time: 165 ns
• Strobe Capability
• Maximum Input Bias Current: 300 nA
• Maximum Input Offset Current: 70 nA
• Can Operate From Single 5-V Supply
• Available in Q-Temp Automotive
   – High-Reliability Automotive Applications
   – Configuration Control and Print Support
   – Qualification to Automotive Standards
• On Products Compliant to MIL-PRF-38535,
   All Parameters Are Tested Unless Otherwise
   Noted. On All Other Products, Production
   Processing Does Not Necessarily Include Testing
   of All Parameters

Applications
• Desktop PCs
• Body Control Modules
• White Goods
• Building Automation
• Oscillators
• Peak Detectors

View
LM111E [Voltage Comparator ]

other parts : LM211J  LP311M  LP311MX  LM311MWC  LM111QML  LM111MWA  LM311J-8  LM111MDA  LM311N-14  LM111E-SMD 

National-Semiconductor
National ->Texas Instruments

General Description
The LM111 is a voltage comparator that has input currents nearly a thousand times lower than devices such as the LM106 or LM710. It is also designed to operate over a wider range of supply voltages: from standard ±15V op amp supplies down to the single 5V supply used for IC logic. The output is compatible with RTL, DTL and TTL as well as MOS circuits. Further, it can drive lamps or relays, switching voltages up to 50V at currents as high as 50 mA.
Both the inputs and the output of the LM111 can be isolated from system ground, and the output can drive loads referred to ground, the positive supply or the negative supply. Offset balancing and strobe capability are provided and outputs can be wire ORed. Although slower than the LM106 and LM710 (200 ns response time vs 40 ns) the device is also much less prone to spurious oscillations. The LM111 has the same pin configuration as the LM106 and LM710.

Features
■ Available with radiation guaranteed
   — High Dose Rate 50 krad(Si)
   — Low Dose and ELDRS Free 100 krad(Si)
■ Operates from single 5V supply
■ Input current: 200 nA max. over temperature
■ Offset current: 20 nA max. over temperature
■ Differential input voltage range: ±30V
■ Power consumption: 135 mW at ±15V
■ Power supply voltage, single 5V to ±15V
■ Offset voltage null capability
■ Strobe capability

View
LM111J [Voltage Comparator ]

other parts : LM111W  LM111WG  LM311MDA  LM111MD8  LM311MWA  JL111SZA  LM111MW8  LM111E-MLS  LM111E/883  LM111W-MLS 

National-Semiconductor
National ->Texas Instruments

General Description
The LM111, LM211 and LM311 are voltage comparators that have input currents nearly a thousand times lower than devices like the LM106 or LM710. They are also designed to operate over a wider range of supply voltages: from standard ±15V op amp supplies down to the single 5V supply used for IC logic. Their output is compatible with RTL, DTL and TTL as well as MOS circuits. Further, they can drive lamps or relays, switching voltages up to 50V at currents as high as 50 mA.
Both the inputs and the outputs of the LM111, LM211 or the LM311 can be isolated from system ground, and the output can drive loads referred to ground, the positive supply or the negative supply. Offset balancing and strobe capability are provided and outputs can be wire OR’ed. Although slower than the LM106 and LM710 (200 ns response time vs 40 ns) the devices are also much less prone to spurious oscillations. The LM111 has the same pin configuration as th LM106 and LM710.
The LM211 is identical to the LM111, except that its performance is specified over a −25˚C to +85˚C temperature rang instead of −55˚C to +125˚C. The LM311 has a temperatur range of 0˚C to +70˚C.

Features
■ Operates from single 5V supply
■ Input current: 150 nA max. over temperature
■ Offset current: 20 nA max. over temperature
■ Differential input voltage range: ±30V
■ Power consumption: 135 mW at ±15V

View
LM111P [Differential Comparators ]

other parts : LM111  LM311  LM211  LM311P  LM211P  LM311D  LM211Q  LM111D  LM211D  LM311PW 

TI
Texas Instruments

Description
The LM111, LM211, and LM311 devices are single high-speed voltage comparators. These devices are designed to operate from a wide range of power supply voltages, including ±15-V supplies for operational amplifiers and 5-V supplies for logic systems. The output levels are compatible with most TTL and MOS circuits. These comparators are capable of driving lamps or relays and switching voltages up to 50 V at 50 mA. All inputs and outputs can be isolated from system ground. The outputs can drive loads referenced to ground, VCC+ or VCC−. Offset balancing and strobe capabilities are available, and the outputs can be wire-OR connected. If the strobe is low, the output is in the off state, regardless of the differential input.

Features
• Fast Response Time: 165 ns
• Strobe Capability
• Maximum Input Bias Current: 300 nA
• Maximum Input Offset Current: 70 nA
• Can Operate From Single 5-V Supply
• Available in Q-Temp Automotive
   – High-Reliability Automotive Applications
   – Configuration Control and Print Support
   – Qualification to Automotive Standards
• On Products Compliant to MIL-PRF-38535,
   All Parameters Are Tested Unless Otherwise
   Noted. On All Other Products, Production
   Processing Does Not Necessarily Include Testing
   of All Parameters

Applications
• Desktop PCs
• Body Control Modules
• White Goods
• Building Automation
• Oscillators
• Peak Detectors

View
1 2 3 4 5 6 7 8 9 10 Next


HOME


Key Word

System  Voltage  Analog  Audio  Axial  Battery  Bipolar  Bridge  Camera  Chip  Clock  Color  Connector  Control  Controller  Converter  Counter  Crystal  Decoder  Digital 

Share Link : 
Language : 한국어    日本語    русский    简体中文    español
@ 2015 - 2018  [ Home ][ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]