Integrated circuits, Transistor, Semiconductors Free Datasheet Search and Download Site

LM111

  

Datasheet

Match, Like LM111 LM1112 LM1114 LM1117 LM111A LM111D LM111E LM111H LM111J LM111N LM111P LM111W
Start with LM111-* LM1112* LM1114* LM1117* LM111A* LM111D* LM111E* LM111F* LM111H* LM111J* LM111M* LM111N* LM111P* LM111Q* LM111W*
End N/A
Included N/A
View Details    
LM1117-1.8 [1A Low Dropout Positive Voltage Regulator ]

other parts : LM1117-1.5  LM1117-2.5  LM1117-3.0  LM1117-3.3  LM1117-3.5  LM1117-5.0  LM1117-ADJ  LM1117-2.85 

CYSTEKEC
Cystech Electonics Corp.

Description
The LM1117 series of positive adjustable and fixed regulators are designed to provide 1A with high efficiency. All internal circuitry is designed to operate down to 1.3V input to output differential. On-chip trimming adjusts the reference voltage to 1%.

Features
● Adjustable or Fixed Output
● Output Current of 1A
● Low Dropout, 1.3V max at 1A Output Current
● 0.04% Line Regulation
● 0.2% Load Regulation
● 100% Thermal Limit Burn-in
● Fast Transient Response

Applications
● High Efficiency Linear Regulators
● Post Regulators for Switching Supplies
● Adjustable Power Supply

 

View
LM1117-1.8 [1A Low Dropout Positive Voltage Regulator ]

other parts : LM1117-1.5  LM1117-2.5  LM1117-3.3  LM1117-5.0  LM1117-ADJ  LM1117-XXXJ3 

ETC2
Unspecified

[CYStech Electronics Corp.]

Description
The LM1117 series of positive adjustable and fixed regulators are designed to provide 1A with high  efficiency. All internal circuitry is designed to operate down to 1.4V input to output differential. The product is specifically designed to provide well-regulated supply for low-voltage IC application such as high-speed bus termination and low current 3.3V logic supply, and other applications such as VGA cards.

Features
●Adjustable or Fixed Output
●Output Current of 1A
●Low Dropout, 1.4V max at 1A OutputCurrent
●Good Noise Rejection
●Output Current Limiting
●Built-inThermal Shutdown
●Fast Transient Response

Applications
● High Efficiency Linear Regulators
● Post Regulators for Switching Supplies
● Adjustable Power Supply

View
LM111E-MLS [Voltage Comparator ]

other parts : LM111J  LM111W  LM111WG  LM311MDA  LM111MD8  LM311MWA  JL111SZA  LM111MW8  LM111E/883  LM111W-MLS 

National-Semiconductor
National ->Texas Instruments

General Description
The LM111, LM211 and LM311 are voltage comparators that have input currents nearly a thousand times lower than devices like the LM106 or LM710. They are also designed to operate over a wider range of supply voltages: from standard ±15V op amp supplies down to the single 5V supply used for IC logic. Their output is compatible with RTL, DTL and TTL as well as MOS circuits. Further, they can drive lamps or relays, switching voltages up to 50V at currents as high as 50 mA.
Both the inputs and the outputs of the LM111, LM211 or the LM311 can be isolated from system ground, and the output can drive loads referred to ground, the positive supply or the negative supply. Offset balancing and strobe capability are provided and outputs can be wire OR’ed. Although slower than the LM106 and LM710 (200 ns response time vs 40 ns) the devices are also much less prone to spurious oscillations. The LM111 has the same pin configuration as th LM106 and LM710.
The LM211 is identical to the LM111, except that its performance is specified over a −25˚C to +85˚C temperature rang instead of −55˚C to +125˚C. The LM311 has a temperatur range of 0˚C to +70˚C.

Features
■ Operates from single 5V supply
■ Input current: 150 nA max. over temperature
■ Offset current: 20 nA max. over temperature
■ Differential input voltage range: ±30V
■ Power consumption: 135 mW at ±15V

View
LM111E-SMD [Voltage Comparator ]

other parts : LM211J  LM111E  LP311M  LP311MX  LM311MWC  LM111QML  LM111MWA  LM311J-8  LM111MDA  LM311N-14 

National-Semiconductor
National ->Texas Instruments

General Description
The LM111 is a voltage comparator that has input currents nearly a thousand times lower than devices such as the LM106 or LM710. It is also designed to operate over a wider range of supply voltages: from standard ±15V op amp supplies down to the single 5V supply used for IC logic. The output is compatible with RTL, DTL and TTL as well as MOS circuits. Further, it can drive lamps or relays, switching voltages up to 50V at currents as high as 50 mA.
Both the inputs and the output of the LM111 can be isolated from system ground, and the output can drive loads referred to ground, the positive supply or the negative supply. Offset balancing and strobe capability are provided and outputs can be wire ORed. Although slower than the LM106 and LM710 (200 ns response time vs 40 ns) the device is also much less prone to spurious oscillations. The LM111 has the same pin configuration as the LM106 and LM710.

Features
■ Available with radiation guaranteed
   — High Dose Rate 50 krad(Si)
   — Low Dose and ELDRS Free 100 krad(Si)
■ Operates from single 5V supply
■ Input current: 200 nA max. over temperature
■ Offset current: 20 nA max. over temperature
■ Differential input voltage range: ±30V
■ Power consumption: 135 mW at ±15V
■ Power supply voltage, single 5V to ±15V
■ Offset voltage null capability
■ Strobe capability

View
LM1117-2.5 [1A Low Dropout Positive Voltage Regulator ]

other parts : LM1117-1.5  LM1117-1.8  LM1117-3.0  LM1117-3.3  LM1117-3.5  LM1117-5.0  LM1117-ADJ  LM1117-2.85 

CYSTEKEC
Cystech Electonics Corp.

Description
The LM1117 series of positive adjustable and fixed regulators are designed to provide 1A with high efficiency. All internal circuitry is designed to operate down to 1.3V input to output differential. On-chip trimming adjusts the reference voltage to 1%.

Features
● Adjustable or Fixed Output
● Output Current of 1A
● Low Dropout, 1.3V max at 1A Output Current
● 0.04% Line Regulation
● 0.2% Load Regulation
● 100% Thermal Limit Burn-in
● Fast Transient Response

Applications
● High Efficiency Linear Regulators
● Post Regulators for Switching Supplies
● Adjustable Power Supply

 

View
LM111E/883 [Voltage Comparator ]

other parts : LM111J  LM111W  LM111WG  LM311MDA  LM111MD8  LM311MWA  JL111SZA  LM111MW8  LM111E-MLS  LM111W-MLS 

National-Semiconductor
National ->Texas Instruments

General Description
The LM111, LM211 and LM311 are voltage comparators that have input currents nearly a thousand times lower than devices like the LM106 or LM710. They are also designed to operate over a wider range of supply voltages: from standard ±15V op amp supplies down to the single 5V supply used for IC logic. Their output is compatible with RTL, DTL and TTL as well as MOS circuits. Further, they can drive lamps or relays, switching voltages up to 50V at currents as high as 50 mA.
Both the inputs and the outputs of the LM111, LM211 or the LM311 can be isolated from system ground, and the output can drive loads referred to ground, the positive supply or the negative supply. Offset balancing and strobe capability are provided and outputs can be wire OR’ed. Although slower than the LM106 and LM710 (200 ns response time vs 40 ns) the devices are also much less prone to spurious oscillations. The LM111 has the same pin configuration as th LM106 and LM710.
The LM211 is identical to the LM111, except that its performance is specified over a −25˚C to +85˚C temperature rang instead of −55˚C to +125˚C. The LM311 has a temperatur range of 0˚C to +70˚C.

Features
■ Operates from single 5V supply
■ Input current: 150 nA max. over temperature
■ Offset current: 20 nA max. over temperature
■ Differential input voltage range: ±30V
■ Power consumption: 135 mW at ±15V

View
LM1117-2.5 [1A Low Dropout Positive Voltage Regulator ]

other parts : LM1117-1.5  LM1117-1.8  LM1117-3.3  LM1117-5.0  LM1117-ADJ  LM1117-XXXJ3 

ETC2
Unspecified

[CYStech Electronics Corp.]

Description
The LM1117 series of positive adjustable and fixed regulators are designed to provide 1A with high  efficiency. All internal circuitry is designed to operate down to 1.4V input to output differential. The product is specifically designed to provide well-regulated supply for low-voltage IC application such as high-speed bus termination and low current 3.3V logic supply, and other applications such as VGA cards.

Features
●Adjustable or Fixed Output
●Output Current of 1A
●Low Dropout, 1.4V max at 1A OutputCurrent
●Good Noise Rejection
●Output Current Limiting
●Built-inThermal Shutdown
●Fast Transient Response

Applications
● High Efficiency Linear Regulators
● Post Regulators for Switching Supplies
● Adjustable Power Supply

View
LM111H-SMD [Voltage Comparator ]

other parts : LM211J  LM111E  LP311M  LP311MX  LM311MWC  LM111QML  LM111MWA  LM311J-8  LM111MDA  LM311N-14 

National-Semiconductor
National ->Texas Instruments

General Description
The LM111 is a voltage comparator that has input currents nearly a thousand times lower than devices such as the LM106 or LM710. It is also designed to operate over a wider range of supply voltages: from standard ±15V op amp supplies down to the single 5V supply used for IC logic. The output is compatible with RTL, DTL and TTL as well as MOS circuits. Further, it can drive lamps or relays, switching voltages up to 50V at currents as high as 50 mA.
Both the inputs and the output of the LM111 can be isolated from system ground, and the output can drive loads referred to ground, the positive supply or the negative supply. Offset balancing and strobe capability are provided and outputs can be wire ORed. Although slower than the LM106 and LM710 (200 ns response time vs 40 ns) the device is also much less prone to spurious oscillations. The LM111 has the same pin configuration as the LM106 and LM710.

Features
■ Available with radiation guaranteed
   — High Dose Rate 50 krad(Si)
   — Low Dose and ELDRS Free 100 krad(Si)
■ Operates from single 5V supply
■ Input current: 200 nA max. over temperature
■ Offset current: 20 nA max. over temperature
■ Differential input voltage range: ±30V
■ Power consumption: 135 mW at ±15V
■ Power supply voltage, single 5V to ±15V
■ Offset voltage null capability
■ Strobe capability

View
LM111H/883 [Voltage Comparator ]

other parts : LM111  LM211  LM311  LM311H  LM211M  LM311M  LM111H  LM211H  LM311N  LM311MX 

National-Semiconductor
National ->Texas Instruments

General Description
The LM111, LM211 and LM311 are voltage comparators that have input currents nearly a thousand times lower than devices like the LM106 or LM710. They are also designed to operate over a wider range of supply voltages: from standard ±15V op amp supplies down to the single 5V supply used for IC logic. Their output is compatible with RTL, DTL and TTL as well as MOS circuits. Further, they can drive lamps or relays, switching voltages up to 50V at currents as high as 50 mA.
Both the inputs and the outputs of the LM111, LM211 or the LM311 can be isolated from system ground, and the output can drive loads referred to ground, the positive supply or the negative supply. Offset balancing and strobe capability are provided and outputs can be wire OR’ed. Although slower than the LM106 and LM710 (200 ns response time vs 40 ns) the devices are also much less prone to spurious oscillations. The LM111 has the same pin configuration as the LM106 and LM710.
The LM211 is identical to the LM111, except that its performance is specified over a −25˚C to +85˚C temperature range instead of −55˚C to +125˚C. The LM311 has a temperature range of 0˚C to +70˚C.

Features
■ Operates from single 5V supply
■ Input current: 150 nA max. over temperature
■ Offset current: 20 nA max. over temperature
■ Differential input voltage range: ±30V
■ Power consumption: 135 mW at ±15V

View
LM1117-3.0 [1A Low Dropout Positive Voltage Regulator ]

other parts : LM1117-1.5  LM1117-1.8  LM1117-2.5  LM1117-3.3  LM1117-3.5  LM1117-5.0  LM1117-ADJ  LM1117-2.85 

CYSTEKEC
Cystech Electonics Corp.

Description
The LM1117 series of positive adjustable and fixed regulators are designed to provide 1A with high efficiency. All internal circuitry is designed to operate down to 1.3V input to output differential. On-chip trimming adjusts the reference voltage to 1%.

Features
● Adjustable or Fixed Output
● Output Current of 1A
● Low Dropout, 1.3V max at 1A Output Current
● 0.04% Line Regulation
● 0.2% Load Regulation
● 100% Thermal Limit Burn-in
● Fast Transient Response

Applications
● High Efficiency Linear Regulators
● Post Regulators for Switching Supplies
● Adjustable Power Supply

 

View
1
Share Link : 

HOME




Language : 한국어     日本語     русский     简体中文     español
@ 2015 - 2018  [ Home ][ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]