Integrated circuits, Transistor, Semiconductors Free Datasheet Search and Download Site

LM111J

  

Datasheet

Match, Like LM111J LM111J8 LM111JG
Start with LM111J-* LM111J/* LM111J8* LM111JG*
End N/A
Included N/A
View Details    
LM111J [Voltage Comparator ]

other parts : LM111W  LM111WG  LM311MDA  LM111MD8  LM311MWA  JL111SZA  LM111MW8  LM111E-MLS  LM111E/883  LM111W-MLS 

National-Semiconductor
National ->Texas Instruments

General Description
The LM111, LM211 and LM311 are voltage comparators that have input currents nearly a thousand times lower than devices like the LM106 or LM710. They are also designed to operate over a wider range of supply voltages: from standard ±15V op amp supplies down to the single 5V supply used for IC logic. Their output is compatible with RTL, DTL and TTL as well as MOS circuits. Further, they can drive lamps or relays, switching voltages up to 50V at currents as high as 50 mA.
Both the inputs and the outputs of the LM111, LM211 or the LM311 can be isolated from system ground, and the output can drive loads referred to ground, the positive supply or the negative supply. Offset balancing and strobe capability are provided and outputs can be wire OR’ed. Although slower than the LM106 and LM710 (200 ns response time vs 40 ns) the devices are also much less prone to spurious oscillations. The LM111 has the same pin configuration as th LM106 and LM710.
The LM211 is identical to the LM111, except that its performance is specified over a −25˚C to +85˚C temperature rang instead of −55˚C to +125˚C. The LM311 has a temperatur range of 0˚C to +70˚C.

Features
■ Operates from single 5V supply
■ Input current: 150 nA max. over temperature
■ Offset current: 20 nA max. over temperature
■ Differential input voltage range: ±30V
■ Power consumption: 135 mW at ±15V

View
LM111J8 [Voltage Comparator ]

other parts : LM111  LM311  LM111A  LT111A  LT311A  LM311H  LM111H  LM311J8  LT111AH  LT311AH 

Linear
Linear Technology


View
LM111JG [Differential Comparators ]

other parts : LM111  LM211  LM311  LM111P  LM211P  LM211D  LM111D  LM311D  LM311P  LM211Q 

TI
Texas Instruments

Description
The LM111, LM211, and LM311 devices are single high-speed voltage comparators. These devices are designed to operate from a wide range of power supply voltages, including ±15-V supplies for operational amplifiers and 5-V supplies for logic systems. The output levels are compatible with most TTL and MOS circuits. These comparators are capable of driving lamps or relays and switching voltages up to 50 V at 50 mA. All inputs and outputs can be isolated from system ground. The outputs can drive loads referenced to ground, VCC+ or VCC−. Offset balancing and strobe capabilities are available, and the outputs can be wire-OR connected. If the strobe is low, the output is in the off state, regardless of the differential input.

Features
• Fast Response Time: 165 ns
• Strobe Capability
• Maximum Input Bias Current: 300 nA
• Maximum Input Offset Current: 70 nA
• Can Operate From Single 5-V Supply
• Available in Q-Temp Automotive
   – High-Reliability Automotive Applications
   – Configuration Control and Print Support
   – Qualification to Automotive Standards
• On Products Compliant to MIL-PRF-38535,
   All Parameters Are Tested Unless Otherwise
   Noted. On All Other Products, Production
   Processing Does Not Necessarily Include Testing
   of All Parameters

Applications
• Desktop PCs
• Body Control Modules
• White Goods
• Building Automation
• Oscillators
• Peak Detectors

View
LM111JGB [Differential Comparators ]

other parts : LM111  LM211  LM311  LM111P  LM211P  LM211D  LM111D  LM311D  LM311P  LM211Q 

TI
Texas Instruments

Description
The LM111, LM211, and LM311 devices are single high-speed voltage comparators. These devices are designed to operate from a wide range of power supply voltages, including ±15-V supplies for operational amplifiers and 5-V supplies for logic systems. The output levels are compatible with most TTL and MOS circuits. These comparators are capable of driving lamps or relays and switching voltages up to 50 V at 50 mA. All inputs and outputs can be isolated from system ground. The outputs can drive loads referenced to ground, VCC+ or VCC−. Offset balancing and strobe capabilities are available, and the outputs can be wire-OR connected. If the strobe is low, the output is in the off state, regardless of the differential input.

Features
• Fast Response Time: 165 ns
• Strobe Capability
• Maximum Input Bias Current: 300 nA
• Maximum Input Offset Current: 70 nA
• Can Operate From Single 5-V Supply
• Available in Q-Temp Automotive
   – High-Reliability Automotive Applications
   – Configuration Control and Print Support
   – Qualification to Automotive Standards
• On Products Compliant to MIL-PRF-38535,
   All Parameters Are Tested Unless Otherwise
   Noted. On All Other Products, Production
   Processing Does Not Necessarily Include Testing
   of All Parameters

Applications
• Desktop PCs
• Body Control Modules
• White Goods
• Building Automation
• Oscillators
• Peak Detectors

View
LM111J-8-SMD [Voltage Comparator ]

other parts : LP311M  LM111E  LM211J  LP311MX  LM311MWC  LM111QML  LM111MWA  LM111MDA  LM311J-8  LM311N-14 

National-Semiconductor
National ->Texas Instruments

General Description
The LM111 is a voltage comparator that has input currents nearly a thousand times lower than devices such as the LM106 or LM710. It is also designed to operate over a wider range of supply voltages: from standard ±15V op amp supplies down to the single 5V supply used for IC logic. The output is compatible with RTL, DTL and TTL as well as MOS circuits. Further, it can drive lamps or relays, switching voltages up to 50V at currents as high as 50 mA.
Both the inputs and the output of the LM111 can be isolated from system ground, and the output can drive loads referred to ground, the positive supply or the negative supply. Offset balancing and strobe capability are provided and outputs can be wire ORed. Although slower than the LM106 and LM710 (200 ns response time vs 40 ns) the device is also much less prone to spurious oscillations. The LM111 has the same pin configuration as the LM106 and LM710.

Features
■ Available with radiation guaranteed
   — High Dose Rate 50 krad(Si)
   — Low Dose and ELDRS Free 100 krad(Si)
■ Operates from single 5V supply
■ Input current: 200 nA max. over temperature
■ Offset current: 20 nA max. over temperature
■ Differential input voltage range: ±30V
■ Power consumption: 135 mW at ±15V
■ Power supply voltage, single 5V to ±15V
■ Offset voltage null capability
■ Strobe capability

View
LM111J-8LQMLV [Voltage Comparator ]

other parts : LP311M  LM111E  LM211J  LP311MX  LM111QML  LM111MWA  LM311MWC  LM111MDA  LM311J-8  LM311N-14 

National-Semiconductor
National ->Texas Instruments

General Description
The LM111 is a voltage comparator that has input currents nearly a thousand times lower than devices such as the LM106 or LM710. It is also designed to operate over a wider range of supply voltages: from standard ±15V op amp supplies down to the single 5V supply used for IC logic. The output is compatible with RTL, DTL and TTL as well as MOS circuits. Further, it can drive lamps or relays, switching voltages up to 50V at currents as high as 50 mA.
Both the inputs and the output of the LM111 can be isolated from system ground, and the output can drive loads referred to ground, the positive supply or the negative supply. Offset balancing and strobe capability are provided and outputs can be wire ORed. Although slower than the LM106 and LM710 (200 ns response time vs 40 ns) the device is also much less prone to spurious oscillations. The LM111 has the same pin configuration as the LM106 and LM710.

Features
■ Available with radiation guaranteed
   — High Dose Rate 50 krad(Si)
   — Low Dose and ELDRS Free 100 krad(Si)
■ Operates from single 5V supply
■ Input current: 200 nA max. over temperature
■ Offset current: 20 nA max. over temperature
■ Differential input voltage range: ±30V
■ Power consumption: 135 mW at ±15V
■ Power supply voltage, single 5V to ±15V
■ Offset voltage null capability
■ Strobe capability

View
LM111J-8RLQMLV [Voltage Comparator ]

other parts : LP311M  LM111E  LM211J  LP311MX  LM111QML  LM111MWA  LM311MWC  LM111MDA  LM311J-8  LM311N-14 

National-Semiconductor
National ->Texas Instruments

General Description
The LM111 is a voltage comparator that has input currents nearly a thousand times lower than devices such as the LM106 or LM710. It is also designed to operate over a wider range of supply voltages: from standard ±15V op amp supplies down to the single 5V supply used for IC logic. The output is compatible with RTL, DTL and TTL as well as MOS circuits. Further, it can drive lamps or relays, switching voltages up to 50V at currents as high as 50 mA.
Both the inputs and the output of the LM111 can be isolated from system ground, and the output can drive loads referred to ground, the positive supply or the negative supply. Offset balancing and strobe capability are provided and outputs can be wire ORed. Although slower than the LM106 and LM710 (200 ns response time vs 40 ns) the device is also much less prone to spurious oscillations. The LM111 has the same pin configuration as the LM106 and LM710.

Features
■ Available with radiation guaranteed
   — High Dose Rate 50 krad(Si)
   — Low Dose and ELDRS Free 100 krad(Si)
■ Operates from single 5V supply
■ Input current: 200 nA max. over temperature
■ Offset current: 20 nA max. over temperature
■ Differential input voltage range: ±30V
■ Power consumption: 135 mW at ±15V
■ Power supply voltage, single 5V to ±15V
■ Offset voltage null capability
■ Strobe capability

View
LM111J-8 [Voltage Comparator ]

other parts : LM111  LM211  LM311  LM311H  LM311N  LM311M  LM111H  LM211H  LM211M  LM311MX 

National-Semiconductor
National ->Texas Instruments

General Description
The LM111, LM211 and LM311 are voltage comparators that have input currents nearly a thousand times lower than devices like the LM106 or LM710. They are also designed to operate over a wider range of supply voltages: from standard ±15V op amp supplies down to the single 5V supply used for IC logic. Their output is compatible with RTL, DTL and TTL as well as MOS circuits. Further, they can drive lamps or relays, switching voltages up to 50V at currents as high as 50 mA.
Both the inputs and the outputs of the LM111, LM211 or the LM311 can be isolated from system ground, and the output can drive loads referred to ground, the positive supply or the negative supply. Offset balancing and strobe capability are provided and outputs can be wire OR’ed. Although slower than the LM106 and LM710 (200 ns response time vs 40 ns) the devices are also much less prone to spurious oscillations. The LM111 has the same pin configuration as the LM106 and LM710.
The LM211 is identical to the LM111, except that its performance is specified over a −25˚C to +85˚C temperature range instead of −55˚C to +125˚C. The LM311 has a temperature range of 0˚C to +70˚C.

Features
■ Operates from single 5V supply
■ Input current: 150 nA max. over temperature
■ Offset current: 20 nA max. over temperature
■ Differential input voltage range: ±30V
■ Power consumption: 135 mW at ±15V

View
LM111J-8 [Voltage Comparator ]

other parts : LM211N  LM111H  LM311M  LM111N  LM311N  LM311H  LM311-N  LM111-N  LM211-N  LM311MX 

TI
Texas Instruments

DESCRIPTION
The LM111-N, LM211-N and LM311-N are voltage comparators that have input currents nearly a thousand times lower than devices like the LM106 or LM710. They are also designed to operate over a wider range of supply voltages: from standard ±15V op amp supplies down to the single 5V supply used for IC logic. Their output is compatible with RTL, DTL and TTL as well as MOS circuits. Further, they can drive lamps or relays, switching voltages up to 50V at currents as high as 50 mA.
Both the inputs and the outputs of the LM111-N, LM211-N or the LM311-N can be isolated from system ground, and the output can drive loads referred to ground, the positive supply or the negative supply. Offset balancing and strobe capability are provided and outputs can be wire ORed. Although slower than the LM106 and LM710 (200 ns response time vs 40 ns) the devices are also much less prone to spurious oscillations. The LM111-N has the same pin configuration as the LM106 and LM710.
The LM211-N is identical to the LM111-N, except that its performance is specified over a −25°C to +85°C temperature range instead of −55°C to +125°C. The LM311-N has a temperature range of 0°C to +70°C.

FEATURES
• Operates From Single 5V Supply
• Input Current: 150 nA Max. Over Temperature
• Offset Current: 20 nA Max. Over Temperature
• Differential Input Voltage Range: ±30V
• Power Consumption: 135 mW at ±15V

View
LM111J/883 [Voltage Comparator ]

other parts : LM111  LM211  LM311  LM211M  LM311H  LM311M  LM111H  LM211H  LM311N  LM311MX 

National-Semiconductor
National ->Texas Instruments

General Description
The LM111, LM211 and LM311 are voltage comparators that have input currents nearly a thousand times lower than devices like the LM106 or LM710. They are also designed to operate over a wider range of supply voltages: from standard ±15V op amp supplies down to the single 5V supply used for IC logic. Their output is compatible with RTL, DTL and TTL as well as MOS circuits. Further, they can drive lamps or relays, switching voltages up to 50V at currents as high as 50 mA.
Both the inputs and the outputs of the LM111, LM211 or the LM311 can be isolated from system ground, and the output can drive loads referred to ground, the positive supply or the negative supply. Offset balancing and strobe capability are provided and outputs can be wire OR’ed. Although slower than the LM106 and LM710 (200 ns response time vs 40 ns) the devices are also much less prone to spurious oscillations. The LM111 has the same pin configuration as the LM106 and LM710.
The LM211 is identical to the LM111, except that its performance is specified over a −25˚C to +85˚C temperature range instead of −55˚C to +125˚C. The LM311 has a temperature range of 0˚C to +70˚C.

Features
■ Operates from single 5V supply
■ Input current: 150 nA max. over temperature
■ Offset current: 20 nA max. over temperature
■ Differential input voltage range: ±30V
■ Power consumption: 135 mW at ±15V

View
1
Share Link : 

HOME

Language : 한국어     日本語     русский     简体中文     español
@ 2015 - 2018  [ Home ][ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]