Integrated circuits, Transistor, Semiconductors Free Datasheet Search and Download Site

LM111W

  

Datasheet

Match, Like LM111W LM111WG
Start with LM111W-* LM111W/* LM111WG* LM111WL* LM111WP* LM111WR*
End N/A
Included N/A
View Details    
LM111W [Voltage Comparator ]

other parts : LM111J  LM111WG  LM311MDA  LM311MWA  JL111SZA  LM111MW8  LM111MD8  LM111E-MLS  LM111E/883  LM111W-MLS 

National-Semiconductor
National ->Texas Instruments

General Description
The LM111, LM211 and LM311 are voltage comparators that have input currents nearly a thousand times lower than devices like the LM106 or LM710. They are also designed to operate over a wider range of supply voltages: from standard ±15V op amp supplies down to the single 5V supply used for IC logic. Their output is compatible with RTL, DTL and TTL as well as MOS circuits. Further, they can drive lamps or relays, switching voltages up to 50V at currents as high as 50 mA.
Both the inputs and the outputs of the LM111, LM211 or the LM311 can be isolated from system ground, and the output can drive loads referred to ground, the positive supply or the negative supply. Offset balancing and strobe capability are provided and outputs can be wire OR’ed. Although slower than the LM106 and LM710 (200 ns response time vs 40 ns) the devices are also much less prone to spurious oscillations. The LM111 has the same pin configuration as th LM106 and LM710.
The LM211 is identical to the LM111, except that its performance is specified over a −25˚C to +85˚C temperature rang instead of −55˚C to +125˚C. The LM311 has a temperatur range of 0˚C to +70˚C.

Features
■ Operates from single 5V supply
■ Input current: 150 nA max. over temperature
■ Offset current: 20 nA max. over temperature
■ Differential input voltage range: ±30V
■ Power consumption: 135 mW at ±15V

View
LM111WG [Voltage Comparator ]

other parts : LM111W  LM111J  LM311MDA  LM311MWA  JL111SZA  LM111MW8  LM111MD8  LM111W-MLS  LM111E-MLS  LM111E/883 

National-Semiconductor
National ->Texas Instruments

General Description
The LM111, LM211 and LM311 are voltage comparators that have input currents nearly a thousand times lower than devices like the LM106 or LM710. They are also designed to operate over a wider range of supply voltages: from standard ±15V op amp supplies down to the single 5V supply used for IC logic. Their output is compatible with RTL, DTL and TTL as well as MOS circuits. Further, they can drive lamps or relays, switching voltages up to 50V at currents as high as 50 mA.
Both the inputs and the outputs of the LM111, LM211 or the LM311 can be isolated from system ground, and the output can drive loads referred to ground, the positive supply or the negative supply. Offset balancing and strobe capability are provided and outputs can be wire OR’ed. Although slower than the LM106 and LM710 (200 ns response time vs 40 ns) the devices are also much less prone to spurious oscillations. The LM111 has the same pin configuration as th LM106 and LM710.
The LM211 is identical to the LM111, except that its performance is specified over a −25˚C to +85˚C temperature rang instead of −55˚C to +125˚C. The LM311 has a temperatur range of 0˚C to +70˚C.

Features
■ Operates from single 5V supply
■ Input current: 150 nA max. over temperature
■ Offset current: 20 nA max. over temperature
■ Differential input voltage range: ±30V
■ Power consumption: 135 mW at ±15V

View
LM111W-MLS [Voltage Comparator ]

other parts : LM111W  LM111J  LM111WG  LM311MDA  LM311MWA  JL111SZA  LM111MW8  LM111MD8  LM111E-MLS  LM111E/883 

National-Semiconductor
National ->Texas Instruments

General Description
The LM111, LM211 and LM311 are voltage comparators that have input currents nearly a thousand times lower than devices like the LM106 or LM710. They are also designed to operate over a wider range of supply voltages: from standard ±15V op amp supplies down to the single 5V supply used for IC logic. Their output is compatible with RTL, DTL and TTL as well as MOS circuits. Further, they can drive lamps or relays, switching voltages up to 50V at currents as high as 50 mA.
Both the inputs and the outputs of the LM111, LM211 or the LM311 can be isolated from system ground, and the output can drive loads referred to ground, the positive supply or the negative supply. Offset balancing and strobe capability are provided and outputs can be wire OR’ed. Although slower than the LM106 and LM710 (200 ns response time vs 40 ns) the devices are also much less prone to spurious oscillations. The LM111 has the same pin configuration as th LM106 and LM710.
The LM211 is identical to the LM111, except that its performance is specified over a −25˚C to +85˚C temperature rang instead of −55˚C to +125˚C. The LM311 has a temperatur range of 0˚C to +70˚C.

Features
■ Operates from single 5V supply
■ Input current: 150 nA max. over temperature
■ Offset current: 20 nA max. over temperature
■ Differential input voltage range: ±30V
■ Power consumption: 135 mW at ±15V

View
LM111WLQMLV [Voltage Comparator ]

other parts : LP311M  LM111E  LM211J  LP311MX  LM311J-8  LM111MWA  LM111MDA  LM111QML  LM311MWC  LM311N-14 

National-Semiconductor
National ->Texas Instruments

General Description
The LM111 is a voltage comparator that has input currents nearly a thousand times lower than devices such as the LM106 or LM710. It is also designed to operate over a wider range of supply voltages: from standard ±15V op amp supplies down to the single 5V supply used for IC logic. The output is compatible with RTL, DTL and TTL as well as MOS circuits. Further, it can drive lamps or relays, switching voltages up to 50V at currents as high as 50 mA.
Both the inputs and the output of the LM111 can be isolated from system ground, and the output can drive loads referred to ground, the positive supply or the negative supply. Offset balancing and strobe capability are provided and outputs can be wire ORed. Although slower than the LM106 and LM710 (200 ns response time vs 40 ns) the device is also much less prone to spurious oscillations. The LM111 has the same pin configuration as the LM106 and LM710.

Features
■ Available with radiation guaranteed
   — High Dose Rate 50 krad(Si)
   — Low Dose and ELDRS Free 100 krad(Si)
■ Operates from single 5V supply
■ Input current: 200 nA max. over temperature
■ Offset current: 20 nA max. over temperature
■ Differential input voltage range: ±30V
■ Power consumption: 135 mW at ±15V
■ Power supply voltage, single 5V to ±15V
■ Offset voltage null capability
■ Strobe capability

View
LM111WPQMLV [Voltage Comparator ]

other parts : LM111W  LM111J  LM111WG  LM311MWA  JL111SZA  LM111MW8  LM311MDA  LM111MD8  LM111W-MLS  LM111E-MLS 

National-Semiconductor
National ->Texas Instruments

General Description
The LM111, LM211 and LM311 are voltage comparators that have input currents nearly a thousand times lower than devices like the LM106 or LM710. They are also designed to operate over a wider range of supply voltages: from standard ±15V op amp supplies down to the single 5V supply used for IC logic. Their output is compatible with RTL, DTL and TTL as well as MOS circuits. Further, they can drive lamps or relays, switching voltages up to 50V at currents as high as 50 mA.
Both the inputs and the outputs of the LM111, LM211 or the LM311 can be isolated from system ground, and the output can drive loads referred to ground, the positive supply or the negative supply. Offset balancing and strobe capability are provided and outputs can be wire OR’ed. Although slower than the LM106 and LM710 (200 ns response time vs 40 ns) the devices are also much less prone to spurious oscillations. The LM111 has the same pin configuration as th LM106 and LM710.
The LM211 is identical to the LM111, except that its performance is specified over a −25˚C to +85˚C temperature rang instead of −55˚C to +125˚C. The LM311 has a temperatur range of 0˚C to +70˚C.

Features
■ Operates from single 5V supply
■ Input current: 150 nA max. over temperature
■ Offset current: 20 nA max. over temperature
■ Differential input voltage range: ±30V
■ Power consumption: 135 mW at ±15V

View
LM111WG-SMD [Voltage Comparator ]

other parts : LP311M  LM111E  LM211J  LP311MX  LM311J-8  LM111MWA  LM111MDA  LM111QML  LM311MWC  LM311N-14 

National-Semiconductor
National ->Texas Instruments

General Description
The LM111 is a voltage comparator that has input currents nearly a thousand times lower than devices such as the LM106 or LM710. It is also designed to operate over a wider range of supply voltages: from standard ±15V op amp supplies down to the single 5V supply used for IC logic. The output is compatible with RTL, DTL and TTL as well as MOS circuits. Further, it can drive lamps or relays, switching voltages up to 50V at currents as high as 50 mA.
Both the inputs and the output of the LM111 can be isolated from system ground, and the output can drive loads referred to ground, the positive supply or the negative supply. Offset balancing and strobe capability are provided and outputs can be wire ORed. Although slower than the LM106 and LM710 (200 ns response time vs 40 ns) the device is also much less prone to spurious oscillations. The LM111 has the same pin configuration as the LM106 and LM710.

Features
■ Available with radiation guaranteed
   — High Dose Rate 50 krad(Si)
   — Low Dose and ELDRS Free 100 krad(Si)
■ Operates from single 5V supply
■ Input current: 200 nA max. over temperature
■ Offset current: 20 nA max. over temperature
■ Differential input voltage range: ±30V
■ Power consumption: 135 mW at ±15V
■ Power supply voltage, single 5V to ±15V
■ Offset voltage null capability
■ Strobe capability

View
LM111WGPQMLV [Voltage Comparator ]

other parts : LM111W  LM111J  LM111WG  LM311MWA  JL111SZA  LM111MW8  LM311MDA  LM111MD8  LM111W-MLS  LM111E-MLS 

National-Semiconductor
National ->Texas Instruments

General Description
The LM111, LM211 and LM311 are voltage comparators that have input currents nearly a thousand times lower than devices like the LM106 or LM710. They are also designed to operate over a wider range of supply voltages: from standard ±15V op amp supplies down to the single 5V supply used for IC logic. Their output is compatible with RTL, DTL and TTL as well as MOS circuits. Further, they can drive lamps or relays, switching voltages up to 50V at currents as high as 50 mA.
Both the inputs and the outputs of the LM111, LM211 or the LM311 can be isolated from system ground, and the output can drive loads referred to ground, the positive supply or the negative supply. Offset balancing and strobe capability are provided and outputs can be wire OR’ed. Although slower than the LM106 and LM710 (200 ns response time vs 40 ns) the devices are also much less prone to spurious oscillations. The LM111 has the same pin configuration as th LM106 and LM710.
The LM211 is identical to the LM111, except that its performance is specified over a −25˚C to +85˚C temperature rang instead of −55˚C to +125˚C. The LM311 has a temperatur range of 0˚C to +70˚C.

Features
■ Operates from single 5V supply
■ Input current: 150 nA max. over temperature
■ Offset current: 20 nA max. over temperature
■ Differential input voltage range: ±30V
■ Power consumption: 135 mW at ±15V

View
LM111WRLQMLV [Voltage Comparator ]

other parts : LP311M  LM111E  LM211J  LP311MX  LM111MWA  LM111MDA  LM311MWC  LM111QML  LM311J-8  LM311N-14 

National-Semiconductor
National ->Texas Instruments

General Description
The LM111 is a voltage comparator that has input currents nearly a thousand times lower than devices such as the LM106 or LM710. It is also designed to operate over a wider range of supply voltages: from standard ±15V op amp supplies down to the single 5V supply used for IC logic. The output is compatible with RTL, DTL and TTL as well as MOS circuits. Further, it can drive lamps or relays, switching voltages up to 50V at currents as high as 50 mA.
Both the inputs and the output of the LM111 can be isolated from system ground, and the output can drive loads referred to ground, the positive supply or the negative supply. Offset balancing and strobe capability are provided and outputs can be wire ORed. Although slower than the LM106 and LM710 (200 ns response time vs 40 ns) the device is also much less prone to spurious oscillations. The LM111 has the same pin configuration as the LM106 and LM710.

Features
■ Available with radiation guaranteed
   — High Dose Rate 50 krad(Si)
   — Low Dose and ELDRS Free 100 krad(Si)
■ Operates from single 5V supply
■ Input current: 200 nA max. over temperature
■ Offset current: 20 nA max. over temperature
■ Differential input voltage range: ±30V
■ Power consumption: 135 mW at ±15V
■ Power supply voltage, single 5V to ±15V
■ Offset voltage null capability
■ Strobe capability

View
LM111WGLQMLV [Voltage Comparator ]

other parts : LP311M  LM111E  LM211J  LP311MX  LM111MWA  LM111MDA  LM311MWC  LM111QML  LM311J-8  LM311N-14 

National-Semiconductor
National ->Texas Instruments

General Description
The LM111 is a voltage comparator that has input currents nearly a thousand times lower than devices such as the LM106 or LM710. It is also designed to operate over a wider range of supply voltages: from standard ±15V op amp supplies down to the single 5V supply used for IC logic. The output is compatible with RTL, DTL and TTL as well as MOS circuits. Further, it can drive lamps or relays, switching voltages up to 50V at currents as high as 50 mA.
Both the inputs and the output of the LM111 can be isolated from system ground, and the output can drive loads referred to ground, the positive supply or the negative supply. Offset balancing and strobe capability are provided and outputs can be wire ORed. Although slower than the LM106 and LM710 (200 ns response time vs 40 ns) the device is also much less prone to spurious oscillations. The LM111 has the same pin configuration as the LM106 and LM710.

Features
■ Available with radiation guaranteed
   — High Dose Rate 50 krad(Si)
   — Low Dose and ELDRS Free 100 krad(Si)
■ Operates from single 5V supply
■ Input current: 200 nA max. over temperature
■ Offset current: 20 nA max. over temperature
■ Differential input voltage range: ±30V
■ Power consumption: 135 mW at ±15V
■ Power supply voltage, single 5V to ±15V
■ Offset voltage null capability
■ Strobe capability

View
LM111WGRLQMLV [Voltage Comparator ]

other parts : LP311M  LM111E  LM211J  LP311MX  LM111MWA  LM111MDA  LM311MWC  LM111QML  LM311J-8  LM311N-14 

National-Semiconductor
National ->Texas Instruments

General Description
The LM111 is a voltage comparator that has input currents nearly a thousand times lower than devices such as the LM106 or LM710. It is also designed to operate over a wider range of supply voltages: from standard ±15V op amp supplies down to the single 5V supply used for IC logic. The output is compatible with RTL, DTL and TTL as well as MOS circuits. Further, it can drive lamps or relays, switching voltages up to 50V at currents as high as 50 mA.
Both the inputs and the output of the LM111 can be isolated from system ground, and the output can drive loads referred to ground, the positive supply or the negative supply. Offset balancing and strobe capability are provided and outputs can be wire ORed. Although slower than the LM106 and LM710 (200 ns response time vs 40 ns) the device is also much less prone to spurious oscillations. The LM111 has the same pin configuration as the LM106 and LM710.

Features
■ Available with radiation guaranteed
   — High Dose Rate 50 krad(Si)
   — Low Dose and ELDRS Free 100 krad(Si)
■ Operates from single 5V supply
■ Input current: 200 nA max. over temperature
■ Offset current: 20 nA max. over temperature
■ Differential input voltage range: ±30V
■ Power consumption: 135 mW at ±15V
■ Power supply voltage, single 5V to ±15V
■ Offset voltage null capability
■ Strobe capability

View
1
Share Link : 

HOME




Language : 한국어     日本語     русский     简体中文     español
@ 2015 - 2018  [ Home ][ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]