Integrated circuits, Transistor, Semiconductors Free Datasheet Search and Download Site

LS3

  

Datasheet

Match, Like LS35
Start with LS30* LS32* LS33* LS35* LS37* LS39*
End *6LS3 *8LS3 *0LS3 *1LS3
Included *LS3-* *LS30* *LS31* *LS32* *LS33* *LS34* *LS35* *LS36* *LS37* *LS38* *LS39* *LS3A* *LS3B* *LS3C* *LS3E*
View Details    
DM74LS367A [Hex TRI-STATE Buffers ]

other parts : 54LS367  74LS367  54LS367A  DM54LS367A  DM54LS367AJ  DM54LS367AW  DM74LS367AM  DM74LS367AN  54LS367ADMQB  54LS367AFMQB 

National-Semiconductor
National ->Texas Instruments

General Description
This device contains six independent gates each of which performs a non-inverting buffer function. The outputs have the TRI-STATE feature. When enabled, the outputs exhibit the low impedance characteristics of a standard LS output with additional drive capability to permit the driving of bus lines without external resistors.

Features
Alternate military/aerospace device (54LS367A) is available. Contact a National Semiconductor sales of fice/distributor for specifications.

 

View
DS26LS31MEFQML [Quad High Speed Differential Line Driver ]

other parts : DS26LS31MQML  AM26LS31MW/883  DS26LS31ME-SMD  DS26LS31MJ-SMD  DS26LS31MJ/883  DS26LS31MJFQML  DS26LS31MW/883  DS26LS31MWFQML  DS26LS31MWFQMLV  DS26LS31MJ/883Q 

Texas-Instruments
Texas Instruments

DESCRIPTION
The DS26LS31MQML is a quad differential line driver designed for digital data transmission over balanced lines. The DS26LS31MQML meets all the requirements of EIA Standard RS-422 and Federal Standard 1020. It is designed to provide unipolar differential drive to twisted-pair or parallel-wire transmission lines.
The circuit provides an enable and disable function common to all four drivers. The DS26LS31MQML features TRI-STATE outputs and logically ANDed complementary outputs. The inputs are all LS compatible and are all one unit load.
The DS26LS31 features a power up/down protection circuit which keeps the output in a high impedance state (TRI-STATE) during power up or down preventing erroneous glitches on the transmission lines.

FEATURES
• Operation from Single 5V Supply
• Outputs Wont Load Line When VCC = 0V
• Four Line Drivers in One Package for
   Maximum Package Density
• Output Short-Circuit Protection
• Complementary Outputs
• Meets the Requirements of EIA Standard RS-
   422
• Pin Compatible with AM26LS31
• Glitch Free Power Up/Down

View
ZLLS350TA [40V LOW LEAKAGE SCHOTTKY DIODE ]

other parts : ZLLS350 

Diodes
Diodes Incorporated.

Description
Packaged in the SOD523 package offering an ideal low VF /IR performance combined with a low package height making the device suitable for various converter, charger and LED driver circuits.

Features
• Low VF
• 380mA continuous current rating
• Low profile SOD523 package
• Totally Lead-Free & Fully RoHS compliant (Notes 1 & 2)
• Halogen and Antimony Free. “Green” Device (Note 3)
• Qualified to AEC-Q101 Standards for High Reliability

View
DM74LS367A [Synchronous 4-Bit Binary Counters ]

other parts : 74LS367  DM74LS367AM  DM74LS367AN  DM74LS367AMX  DM74LS367ANX 

Fairchild
Fairchild Semiconductor

General Description
This device contains six independent gates each of which performs a non-inverting buffer function. The outputs have the 3-STATE feature. When enabled, the outputs exhibit the low impedance characteristics of a standard LS output with additional drive capability to permit the driving of bus lines without external resistors. When disabled, both the output transistors are turned OFF presenting a high-imped ance state to the bus line. Thus the output will act neither as a significant load nor as a driver. To minimize the possibility that two outputs will attempt to take a common bus to opposite logic levels, the disable time is shorter than the enable time of the outputs.

 

View
AM26LS31MFK [Quadruple Differential Line Driver ]

other parts : 26LS31  AM26LS31  AM26LS31M  AM26LS31C  AM26LS31CN  AM26LS31CD  AM26LS31MW  AM26LS31-W  AM26LS31MJ  AM26LS31CNS 

TI
Texas Instruments

Description
The AM26LS31 family of devices is a quadruple complementary-output line driver designed to meet the requirements of ANSI TIA/EIA-422-B and ITU (formerly CCITT) Recommendation V.11. The 3-state outputs have high-current capability for driving balanced lines such as twisted-pair or parallel-wire transmission lines, and they are in the high impedance state in the power-off condition. The enable function is common to all four drivers and offers the choice of an active-high or active-low enable (G, G) input. Low-power Schottky circuitry reduces power consumption without sacrificing speed.

Features
• Meets or Exceeds the Requirements of ANSI
   TIA/EIA-422-B and ITU
• Operates From a Single 5-V Supply
• TTL-Compatible
• Complementary Outputs
• High Output Impedance in Power-Off Conditions
• Complementary Output-Enable Inputs
• Available MIL-PRF-38535-Qualified Options (M):
   All Parameters Are Tested Unless Otherwise
   Noted. On All Other Products, Production
   Processing Does Not Necessarily Include Testing
   of All Parameters.

Applications
• Motor Encoders
• Field Transmitters: Pressure Sensors and
   Temperature Sensors
• Military and Avionics Imaging
• Temperature Sensors or Controllers Using
   Modbus

View
AM26LS32ACPWRG4 [QUADRUPLE DIFFERENTIAL LINE RECEIVER ]

other parts : SA32A  26LS32A  M26LS33  26LS33AC  26LS32AI  AM26LS33  AM26LS32A  AM26LS32AC  AM26LS33AC  AM26LS32AM 

TI
Texas Instruments

DESCRIPTION
The AM26LS32A and AM26LS33A devices are quadruple differential line receivers for balanced and unbalanced digital data transmission. The enable function is common to all four receivers and offers a choice of active-high or active-low input. The 3-state outputs permit connection directly to a bus-organized system. Fail-safe design ensures that, if the inputs are open, the outputs always are high.
Compared to the AM26LS32 and the AM26LS33, the AM26LS32A and AM26LS33A incorporate an additional stage of amplification to improve sensitivity. The input impedance has been increased, resulting in less loading of the bus line. The additional stage has increased propagation delay; however, this does not affect interchangeability in most applications.
The AM26LS32AC and AM26LS33AC are characterized for operation from 0°C to 70°C. The AM26LS32AI is characterized for operation from –40°C to 85°C. The AM26LS32AM and AM26LS33AM are characterized for operation over the full military temperature range of –55°C to 125°C.

FEATURES
• AM26LS32A Devices Meet or Exceed the
   Requirements of ANSI TIA/EIA-422-B,
   TIA/EIA-423-B, and ITU Recommendations V.10
   and V.11
• AM26LS32A Devices Have ±7-V
   Common-Mode Range With ±200-mV
   Sensitivity
• AM26LS33A Devices Have ±15-V
   Common-Mode Range With ±500-mV
   Sensitivity
• Input Hysteresis . . . 50 mV Typical
• Operate From a Single 5-V Supply
• Low-Power Schottky Circuitry
• 3-State Outputs
• Complementary Output-Enable Inputs
• Input Impedance . . . 12 kΩ Minimum
• Designed to Be Interchangeable With
   Advanced Micro Devices AM26LS32™ and
   AM26LS33™

View
AM26LS31MFKB [Quadruple Differential Line Driver ]

other parts : 26LS31  AM26LS31  AM26LS31M  AM26LS31C  AM26LS31MW  AM26LS31CD  AM26LS31MJ  AM26LS31-W  AM26LS31CN  AM26LS31CNS 

TI
Texas Instruments

Description
The AM26LS31 family of devices is a quadruple complementary-output line driver designed to meet the requirements of ANSI TIA/EIA-422-B and ITU (formerly CCITT) Recommendation V.11. The 3-state outputs have high-current capability for driving balanced lines such as twisted-pair or parallel-wire transmission lines, and they are in the high impedance state in the power-off condition. The enable function is common to all four drivers and offers the choice of an active-high or active-low enable (G, G) input. Low-power Schottky circuitry reduces power consumption without sacrificing speed.

Features
• Meets or Exceeds the Requirements of ANSI
   TIA/EIA-422-B and ITU
• Operates From a Single 5-V Supply
• TTL-Compatible
• Complementary Outputs
• High Output Impedance in Power-Off Conditions
• Complementary Output-Enable Inputs
• Available MIL-PRF-38535-Qualified Options (M):
   All Parameters Are Tested Unless Otherwise
   Noted. On All Other Products, Production
   Processing Does Not Necessarily Include Testing
   of All Parameters.

Applications
• Motor Encoders
• Field Transmitters: Pressure Sensors and
   Temperature Sensors
• Military and Avionics Imaging
• Temperature Sensors or Controllers Using
   Modbus

View
AM26LS31MJ [Quadruple Differential Line Driver ]

other parts : 26LS31  AM26LS31  AM26LS31M  AM26LS31C  AM26LS31CD  AM26LS31MW  AM26LS31-W  AM26LS31CN  AM26LS31CNS  AM26LS31CDB 

TI
Texas Instruments

Description
The AM26LS31 family of devices is a quadruple complementary-output line driver designed to meet the requirements of ANSI TIA/EIA-422-B and ITU (formerly CCITT) Recommendation V.11. The 3-state outputs have high-current capability for driving balanced lines such as twisted-pair or parallel-wire transmission lines, and they are in the high impedance state in the power-off condition. The enable function is common to all four drivers and offers the choice of an active-high or active-low enable (G, G) input. Low-power Schottky circuitry reduces power consumption without sacrificing speed.

Features
• Meets or Exceeds the Requirements of ANSI
   TIA/EIA-422-B and ITU
• Operates From a Single 5-V Supply
• TTL-Compatible
• Complementary Outputs
• High Output Impedance in Power-Off Conditions
• Complementary Output-Enable Inputs
• Available MIL-PRF-38535-Qualified Options (M):
   All Parameters Are Tested Unless Otherwise
   Noted. On All Other Products, Production
   Processing Does Not Necessarily Include Testing
   of All Parameters.

Applications
• Motor Encoders
• Field Transmitters: Pressure Sensors and
   Temperature Sensors
• Military and Avionics Imaging
• Temperature Sensors or Controllers Using
   Modbus

View
DNLS350Y_Rev4-2 [LOW VCE(SAT) NPN SURFACE MOUNT TRANSISTOR ]

other parts : DNLS350Y-13_Rev4-2 

Diodes
Diodes Incorporated.

Features
• Epitaxial Planar Die Construction
• Complementary PNP Type Available (DPLS350Y)
• Ideally Suited for Automated Assembly Processes
• Ideal for Medium Power Switching or Amplification Applications
• Lead Free By Design/RoHS Compliant (Note 1)
• "Green" Device (Note 2)

View
DS26LS31MJ [Quad High Speed Differential Line Driver ]

other parts : DS26LS31  DS26LS31C  DS26LS31M  DS26LS31MW  DS26LS31ME  DS26LS31CN  DS26LS31CM  DS26LS31ME/883  DS26LS31MJ/883  DS26LS31MW/883 

National-Semiconductor
National ->Texas Instruments

General Description
The DS26LS31 is a quad differential line driver designed for digital data transmission over balanced lines. The DS26LS31 meets all the requirements of EIA Standard RS-422 and Federal Standard 1020. It is designed to provide unipolar differential drive to twisted-pair or parallel-wire transmission lines.

Features
Output skew —2.0 ns typical
Input to output delay —10 ns typical
Operation from single 5V supply
Outputs won’t load line when VCC=0V
Four line drivers in one package for maximum package density
Output short-circuit protection
Complementary outputs
Meets the requirements of EIA Standard RS-422
Pin compatible with AM26LS31
Available in military and commercial temperature range

View
1
Share Link : 

HOME

Language : 한국어     日本語     русский     简体中文     español
@ 2015 - 2018  [ Home ][ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]