datasheetQ language:

MC28

  

Datasheet

Match, Like N/A
Start with MC280* MC282* MC283* MC284* MC285* MC28F* MC28G*
End *SMC28
Included *HMC28* *GMC28* *0MC28* *SMC28*

View Details

Manufacturer Part no Description View
Silabs
Silicon Laboratories
530MC289M000DG CRYSTAL OSCILLATOR(XO) (10MHZ TO 1.4GHZ)

Description
The Si530/531 XO utilizes Silicon Laboratories’ advanced DSPLL® circuitry to provide a low jitter clock at high frequencies. The Si530/531 is available with any-rate output frequency from 10 to 945 MHz and select frequencies to 1400 MHz. Unlike a traditional XO, where a different crystal is required for each output frequency, the Si530/531 uses one fixed crystal to provide a wide range of output frequencies.


other parts : 530AA182M000DG 530AA455M000DG 530AA465M000DG 530AA59M0000DGR 530AA600M000DG 530AA607M000DG 530AA629M000DG 530AA715M000DG 530AA786M000DGR 530AA823M000DGR 
Hittite
Hittite Microwave
HMC282 GaAs MMIC LOW NOISE AMPLIFIER, 36 - 40 GHz

General Description
The HMC282 chip is a four stage GaAs MMIC Low Noise Amplifier (LNA) which covers the frequency range of 36 to 40 GHz. The chip can easily be integrated into Multi-Chip Modules (MCMs) due to its small (2.30 mm2) size. The chip utilizes a GaAs PHEMT process offering 26 dB gain from a bias supply of +3.5V @ 90mA with a noise figure of 3.5 dB. All data is with the chip in a 50 ohm test fixture connected via ribbon bonds of minimal length. The HMC282 may be used in

Motorola
Motorola => Freescale
1SMC28A PLASTIC SURFASE MOUNT ZENER OVERVOLTAGE TRANSIENT SUPPRESSORS 1500W PEAK POWER 5.0 WATTS STEADY STATE
other parts : 1SMC10 1SMC100 1SMC100A 1SMC10A 1SMC11 1SMC110 1SMC110A 1SMC11A 1SMC12 1SMC120 
EIC
Electronics Industry
1SMC28C SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Stand-off Voltage : 5.0 to 188V
Peak Pulse Power : 1500 W

FEATURES :
* 1500W surge capability at 1ms
* Excellent clamping capability
* Low zener impedance
* Fast response time : typically less then 1.0 ps from 0 volt to V BR(min.)
* Typical IR less then 1μA above 10V
* Pb / RoHS Free

MECHANICAL DATA
* Case : SMC Molded plastic
* Epoxy : UL94V-O rate flame retardant
* Lead : Lead Formed for Surface


other parts : 1SMC100A 1SMC100C 1SMC100CA 1SMC10A 1SMC10C 1SMC10CA 1SMC110A 1SMC110C 1SMC110CA 1SMC11A 
Hittite
Hittite Microwave
HMC284MS8G SPDT NON-REFLECTIVE SWITCH, DC - 3.5 GHz

General Description
The HMC284MS8G & HMC284MS8GE are low-cost SPDT switches in 8-lead grounded base MSOP packages.


other parts : HMC284MS8GE 
ON-Semiconductor
ON Semiconductor
1SMC28AT3 PLASTIC SURFACE MOUNT ZENER TRANSIENT VOLTAGE SUPPRESSORS 5.0−78 VOLTS 1500 WATT PEAK POWER

1500 Watt Peak Power Zener Transient Voltage Suppressors Unidirectional*

The SMC series is designed to protect voltage sensitive components from high voltage, high energy transients. They have
excellent clamping capability, high surge capability, low zener impedance and fast response time. The SMC series is supplied in ON Semiconductor’s  exclusive,  cost-effective,  highly  reliable Surmetic package and is ideally suited for use in


other parts : 1SMC10AT3 1SMC10AT3G 1SMC12AT3 1SMC12AT3G 1SMC13AT3 1SMC13AT3G 1SMC14AT3 1SMC14AT3G 1SMC15AT3 1SMC15AT3G 
EIC
Electronics Industry
1SMC28CA SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Stand-off Voltage : 5.0 to 188V
Peak Pulse Power : 1500 W

FEATURES :
* 1500W surge capability at 1ms
* Excellent clamping capability
* Low zener impedance
* Fast response time : typically less then 1.0 ps from 0 volt to V BR(min.)
* Typical IR less then 1μA above 10V
* Pb / RoHS Free

MECHANICAL DATA
* Case : SMC Molded plastic
* Epoxy : UL94V-O rate flame retardant
* Lead : Lead Formed for Surface


other parts : 1SMC100A 1SMC100C 1SMC100CA 1SMC10A 1SMC10C 1SMC10CA 1SMC110A 1SMC110C 1SMC110CA 1SMC11A 
Hittite
Hittite Microwave
HMC283 GaAs MMIC MEDIUM POWER AMPLIFIER, 17 - 40 GHz

General Description
The HMC283 chip is a four stage GaAs MMIC Medium Power Amplifi er (MPA) which covers the frequency range of 17 to 40 GHz. The chip can easily be inte grated into Multi-Chip Modules (MCMs) due to its small size. The chip utilizes a GaAs PHEMT process offering 21 dB gain and +21 dBm output power from a bias supply of +3.5V @ 300 mA. The HMC283 may be used as a frequency doubler. A B.I.T. (Built-In-Test) pad (Vdet) allows monitoring microwave output power. All data is

Hittite
Hittite Microwave
HMC286 GaAs MMIC POWER AMPLIFIER 5.0 - 6.0 GHz

General Description
The HMC286 & HMC286E are low cost Low Noise Amplifi ers (LNA) for 2.3 to 2.5 GHz spread spectrum applications. The LNA provides 19 dB of gain and a 1.7 dB noise fi gure from a single positive +3V power supply that consumes only 8.5mA. The typical output 1 dB compression point is +6 dBm at 2.4 GHz. The compact LNA design utilizes on-chip matching for repeatable gain and noise fi gure performance. In addition, eliminating the external matching circuitry also


other parts : HMC286E 
Central-Semiconductor
Central Semiconductor
1SMC28CA SURFACE MOUNT BI-DIRECTIONAL GLASS PASSIVATED JUNCTION SILICON TRANSIENT VOLTAGE SUPPRESSOR 1500 WATTS, 5.0 THRU 170 VOLTS

DESCRIPTION:
The CENTRAL SEMICONDUCTOR 1SMC5.0CA Series types are Surface Mount Bi-Directional Glass Passivated Junction Transient Voltage Suppressors designed to protect voltage sensitive components from high voltage transients.

THIS DEVICE IS MANUFACTURED WITH A GLASS PASSIVATED CHIP FOR OPTIMUM RELIABILITY.
Note: For Uni-directional devices, please refer to the 1SMC5.0A Series data sheet.

MARKING CODE: SEE ELECTRICAL CHARACTERISTICS TABLE


other parts : 1SMC100CA 1SMC10CA 1SMC110CA 1SMC11CA 1SMC120CA 1SMC12CA 1SMC130CA 1SMC13CA 1SMC14CA 1SMC150CA 

1

234567


Key Word
System  Voltage  Analog  Audio  Axial  Battery  Bipolar  Bridge  Camera  Chip  Clock  Color  Connector  Control  Controller  Converter  Counter  Crystal  Decoder  Digital 

Language : 한국어   日本語   русский   简体中文   español
@ 2015 - 2017  [ Home ][ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]