Integrated circuits, Transistor, Semiconductors Free Datasheet Search and Download Site

S630

  

Datasheet

Match, Like N/A
Start with N/A
End *TS630 *LS630 *CS630 *-S630 *PS630 *RS630 *8S630 *2S630 *FS630 *1S630
Included *S630* *S6300* *S6301* *S6302* *S6303* *S6304* *S6305* *S6306* *S6307* *S6308* *S630A* *S630B* *S630D* *S630H* *S630K* *S630M* *S630S*
View Details    
TPS63010 [HIGHLY EFFICIENT, SINGLE INDUCTOR BUCK-BOOST CONVERTER WITH 2-A SWITCHES ]

other parts : TPS63010YFF  TPS63010YFFR  TPS63010YFFT  TPS63011  TPS63011YFF  TPS63011YFFR  TPS63011YFFT 

TI
Texas Instruments

DESCRIPTION
The TPS6301x devices provide a power supply solution for products powered by either a two-cell or three-cell alkaline, NiCd or NiMH battery, or a one-cell Li-Ion or Li-polymer battery. Output currents can go as high as 1200 mA while using a single-cell Li-Ion or Li-Polymer Battery, and discharge it down to
2.5 V or lower. The buck-boost converter is based on a fixed frequency, pulse-width-modulation (PWM)
controller using synchronous rectification to obtain maximum efficiency. At low load currents, the converter enters Power Save mode to maintain high efficiency over a wide load current range. The Power

FEATURES
• Up to 96% Efficiency
• 1200-mA Output Current at 3.3 V in Step Down Mode (VIN = 3.6 V to 5.5 V)
• Up to 800-mA Output Current at 3.3 V in Boost Mode (VIN > 2.4 V)
• Automatic Transition between Step Down and Boost Mode
• Device Quiescent Current less than 50µA
• Input Voltage Range: 2 V to 5.5 V
• Fixed and Adjustable Output Voltage Options from 1.2 V to 5.5 V
• Power Save Mode for Improved Efficiency at Low Output Power
• Forced Fixed Frequency Operation and Synchronization possible
• Load Disconnect During Shutdown
• Output Overvoltage Protection
• Overtemperature Protection
• Available in Small 20 pin 2.14 mm x 1.93 mm, WCSP Package

APPLICATIONS
• All Two-Cell and Three-Cell Alkaline, NiCd or NiMH or Single-Cell Li Battery Powered Products
• Portable Audio Players
• PDAs
• Cellular Phones
• Personal Medical Products
• White LEDs

View
Q67060-S6300-A2 [Smart Two Channel Highside Power Switch ]

other parts : BTS610L1 

Siemens
Siemens AG

General Description
N channel vertical power FET with charge pump, ground referenced CMOS compatible input and diagnostic feedback, monolithically integrated in Smart SIPMOS technology. Fully protected by embedded protection functions.

Features
• Overload protection
• Current limitation
• Short circuit protection
• Thermal shutdown
• Overvoltage protection (including load dump)
• Reverse battery protection1)
• Undervoltage and overvoltage shutdown with
   auto-restart and hysteresis
• Open drain diagnostic output
• Open load detection in ON-state
• CMOS compatible input
• Loss of ground and loss of Vbb protection
• Electrostatic discharge (ESD) protection

Application
• µC compatible power switch with diagnostic
   feedback for 12 V DC grounded loads
• Most suitable for resistive and lamp loads

View
Q67060-S6300-A2 [Smart Two Channel Highside Power Switch ]

other parts : BTS610L1 

Infineon
Infineon Technologies

General Description
N channel vertical power FET with charge pump, ground referenced CMOS compatible input and diagnostic feedback, monolithically integrated in Smart SIPMOS technology. Fully protected by embedded protection functions.

Features
• Overload protection
• Current limitation
• Short circuit protection
• Thermal shutdown
• Overvoltage protection (including load dump)
• Reverse battery protection1)
• Undervoltage and overvoltage shutdown with
   auto-restart and hysteresis
• Open drain diagnostic output
• Open load detection in ON-state
• CMOS compatible input
• Loss of ground and loss of Vbb protection
• Electrostatic discharge (ESD) protection

Application
• µC compatible power switch with diagnostic
   feedback for 12 V DC grounded loads
• Most suitable for resistive and lamp loads

View
TPS63030 [High Efficiency Single Inductor Buck-Boost Converter With 1-A Switches ]

other parts : TPS63030DSK  TPS63030DSKR  TPS63030DSKRG4  TPS63030DSKT  TPS63030DSKTG4  TPS63031  TPS63031DSK 

TI
Texas Instruments

Description
The TPS6303x devices provide a power supply solution for products powered by either a two-cell or three-cell alkaline, NiCd or NiMH battery, or a one-cell Li-ion or Li-polymer battery. Output currents can go as high as 600 mA while using a single-cell Li-ion or Li-polymer battery, and discharge it down to 2.5 V or lower. The buck-boost converter is based on a fixed frequency, pulse width modulation (PWM) controller using synchronous rectification to obtain maximum efficiency. At low load currents, the converter enters power-save mode to maintain high efficiency over a wide load current range. The power-save mode can be disabled, forcing the converter to operate at a fixed switching frequency. The maximum average current in the switches is limited to a typical value of 1000 mA. The output voltage is programmable using an external resistor divider, or is fixed internally on the chip. The converter can be disabled to minimize battery drain. During shutdown, the load is disconnected from the battery.
The TPS6303x devices operate over a free air temperature range of –40°C to 85°C. The devices are packaged in a 10-pin VSON package measuring 2.5 mm × 2.5 mm (DSK).

Features
• Input Voltage Range: 1.8 V to 5.5 V
• Fixed and Adjustable Output Voltage Options from 1.2 V to 5.5 V
• Up to 96% Efficiency
• 800-mA Output Current at 3.3 V in Step-Down Mode (VIN = 3.6 V to 5.5 V)
• Up to 500-mA Output Current at 3.3 V in Boost Mode (VIN > 2.4 V)
• Automatic Transition Between Step-Down and Boost Mode
• Device Quiescent Current less than 50 μA
• Power-Save Mode for Improved Efficiency at Low Output Power
• Forced Fixed Frequency Operation and Synchronization Possible
• Load Disconnect During Shutdown
• Overtemperature Protection
• Available in a Small 2.5-mm × 2.5-mm 10-Pin VSON Package (QFN)

Applications
• All Two-Cell and Three-Cell Alkaline, NiCd or NiMH or Single-Cell Li Battery Powered Products
• Portable Audio Players
• Mobile Phones
• Personal Medical Products
• White LEDs

 

View
CS630 [Phase Control Thyristor ]

other parts : CS630-12IO1  CS630-14IO1  CS630-16IO1 

IXYS
IXYS CORPORATION

ITRMS = 1400 A
ITAVM = 630 A
VRRM = 1200 - 1600

Features
● Thyristor for line frequency
● International standard package
● Long-term stability of blocking voltages
● Gate and auxiliary cathode pin connection
● Amplifying gate

Typical Applications
● DC Motor control
● Power converter
● AC power controller

 

View
STRS6307 [STRS6307 Circuit ]

other parts : STRS-6307 

ETC
Unspecified

[micro electronic]

STRS6307 Circuit

View
SN54LS630 [16-BIT PARALLEL ERROR DETECTION AND CORRECTION CIRCUITS ]

other parts : SDLS187  SN54LS631  SN74LS630  SN74LS631 

TI
Texas Instruments
View
TPS63020 [HIGH EFFICIENCY SINGLE INDUCTOR BUCK-BOOST CONVERTER WITH 4-A SWITCHES ]

other parts : TPS63020DSJ  TPS63020DSJR  TPS63020DSJT  TPS63021  TPS63021DSJ  TPS63021DSJR  TPS63021DSJT 

TI
Texas Instruments
View
TPS63000 [HIGH EFFICIENT SINGLE INDUCTOR BUCK-BOOST CONVERTER WITH 1.8-A SWITCHES ]

other parts : TPS63000DRC  TPS63000DRCR  TPS63000DRCRG4  TPS63000DRCT  TPS63000DRCTG4  TPS63001  TPS63001DRC 

TI
Texas Instruments

DESCRIPTION
The TPS6300x devices provide a power supply solution for products powered by either a two-cell or three-cell alkaline, NiCd or NiMH battery, or a one-cell Li-Ion or Li-polymer battery. Output currents can go as high as 1200 mA while using a single-cell Li-Ion or Li-Polymer Battery, and discharge it down to 2.5V or lower. The buck-boost converter is based on a fixed frequency, pulse-width-modulation (PWM) controller using synchronous rectification to obtain maximum efficiency. At low load currents, the converter enters Power Save mode to maintain high efficiency over a wide load current range. The Power Save mode can be disabled, forcing the converter to operate at a fixed switching frequency. The maximum average current in the switches is limited to a typical value of 1800 mA. The output voltage is programmable using an external resistor divider, or is fixed internally on the chip. The converter can be disabled to minimize battery drain. During shutdown, the load is disconnected from the battery. The device is packaged in a 10-pin QFN PowerPAD™ package measuring 3 mm × 3 mm (DRC).

FEATURES
• Up to 96% Efficiency
• 1200-mA Output Current at 3.3V in Step Down Mode (VIN = 3.6V to 5.5V)
• Up to 800-mA Output Current at 3.3V in Boost Mode (VIN > 2.4V)
• Automatic Transition between Step Down and Boost Mode
• Device Quiescent Current less than 50µA
• Input Voltage Range: 1.8V to 5.5V
• Fixed and Adjustable Output Voltage Options from 1.2V to 5.5V
• Power Save Mode for Improved Efficiency at Low Output Power
• Forced Fixed Frequency Operation and Synchronization possible
• Load Disconnect During Shutdown
• Over-Temperature Protection
• Available in Small 3 mm × 3 mm, QFN-10 Package

APPLICATIONS
• All Two-Cell and Three-Cell Alkaline, NiCd or NiMH or Single-Cell Li Battery Powered Products
• Portable Audio Players
• PDAs
• Cellular Phones
• Personal Medical Products
• White LEDs

View
IRFS630B [200V N-Channel MOSFET ]

other parts : IRF630B 

Fairchild
Fairchild Semiconductor

General Description
These N-Channel enhancement mode power field effect transistors are produced using Fairchild’s proprietary, planar, DMOS technology. This advanced technology has been especially tailored to minimize on-state resistance, provide superior switching performance, and withstand high energy pulse in the avalanche and commutation mode. These devices are well suited for high efficiency switching DC/DC converters,
switch mode power supplies, DC-AC converters for uninterrupted power supply and motor control.

Features
• 9.0A, 200V, RDS(on)= 0.4Ω@VGS= 10 V
• Low gate charge ( typical 22 nC)
• Low Crss ( typical 22 pF)
• Fast switching
• 100% avalanche tested
• Improved dv/dt capability

View
1 2 3 4 5 6 7 8 9 10 Next

HOME




Language : 한국어     日本語     русский     简体中文     español
@ 2015 - 2018  [ Home ][ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]