MFG CO.
Philips Electronics
DESCRIPTION
The 74LVC126A is a high-performance, low-power, low-voltage, Si-gate CMOS device, superior to most advanced CMOS compatible TTL families.
Inputs can be driven from either 3.3 or 5 V devices. In 3-state operation, outputs can handle 5 V.
The 74LVC126A consists of four non-inverting buffers/line drivers with 3-state outputs (nY) which are controlled by the output enable input (nOE). A LOW at nOE causes the outputs to assume a high-impedance OFF-state.
FEATURES
⢠5 V tolerant inputs/outputs for interfacing with 5 V logic
⢠Wide supply voltage range from 1.2 to 3.6 V
⢠CMOS low power consumption
⢠Direct interface with TTL levels
⢠Inputs accept voltages up to 5.5 V
⢠Complies with JEDEC standard no. 8-1A
⢠ESD protection:
HBM EIA/JESD22-A114-A exceeds 2000 V
MM EIA/JESD22-A115-A exceeds 200 V.
⢠Specified from â40 to +85 °C and â40 to +125 °C.
Part Name
Description
PDF
MFG CO.
Quad buffer/line driver with 5 V tolerant input/outputs; 3-state
Nexperia B.V. All rights reserved
Quad buffer/line driver with 5 V tolerant input/outputs; 3-state
Nexperia B.V. All rights reserved
Quad buffer/line driver with 5 V tolerant input/outputs; 3-state
NXP Semiconductors.
Quad buffer/line driver with 5 V tolerant input/outputs; 3-state
Nexperia B.V. All rights reserved
Quad buffer/line driver with 5 V tolerant input/outputs; 3-state ( Rev : 2013 )
Nexperia B.V. All rights reserved
Quad buffer/line driver with 5 V tolerant inputs/outputs; 3-state
Nexperia B.V. All rights reserved
Octal buffer/line driver with 5-volt tolerant inputs/outputs 3-Statetitle
NXP Semiconductors.
Octal buffer/line driver with 5 V tolerant inputs/outputs; 3-state
NXP Semiconductors.
Octal buffer/line driver with 5 V tolerant inputs/outputs; 3-state
NXP Semiconductors.
Octal buffer/line driver with 5 V tolerant inputs/outputs; inverting; 3-state
NXP Semiconductors.