GENERAL DESCRIPTION
The ISD5100 ChipCorder Series provide high quality, fully integrated, single-chip Record/Playback solutions for 1- to 16-minute messaging applications that are ideal for use in cellular phones, automotive communications, GPS/navigation systems and other portable products. The ISD5100 Series products are an enhancement of the ISD5000 architecture, providing: 1) the I2C serial port - address, control and duration selection are accomplished through an I2C interface to minimize pin count (ONLY two control lines required); 2) the capability of storing digital data, in addition to analog data. This feature allows customers to store phone numbers, system configuration parameters and message address locations for message management capability; 3) Various internal circuit blocks can be individually powered-up or -down for power saving.
FEATURES
Fully-Integrated Solution
⢠Single-chip voice record/playback solution
⢠Dual storage of digital and analog data
⢠Durations
⺠8 to 16-minute (ISD5116)
⺠4 to 8-minute (ISD5108)
⺠2 to 4-minute (ISD5104)
⺠1 to 2-minute (ISD5102)
Low Power Consumption
⢠+2.7 to +3.3V (VCC) Supply Voltage
⢠Supports 2.0V and 3.0V interface logic
⢠Operating Current:
⺠ICC Play = 15 mA (typical)
âºICC Rec = 30 mA (typical)
âºICC Feedthrough = 12 mA (typical)
⢠Standby Current:
⺠ISB = 1µA (typical)
⢠Most stages can be individually powered down to minimize power consumption
Enhanced Voice Features
⢠One or two-way conversation record
⢠One or two-way message playback
⢠Voice memo record and playback
⢠Private call screening
⢠In-terminal answering machine
⢠Personalized outgoing message
⢠Private call announce while on call
Digital Memory Features
⢠Up to 4 Mb available (ISD5116)
⢠Up to 2 Mb available (ISD5108)
⢠Up to 1 Mb available (ISD5104)
⢠Up to 512Kb available (ISD5102)
⢠Storage of phone numbers, system configuration parameters and message address table in cellular application
Easy-to-use and Control
⢠No compression algorithm development required
⢠User-controllable sampling rates
⢠Programmable analog interface
⢠Standard & Fast mode I2C serial interface (100kHz â 400 kHz)
⢠Fully addressable for multiple messages
High Quality Solution
⢠High quality voice and music reproduction
⢠Winbondâs standard 100-year message retention (typical)
⢠100K record cycles (typical) for analog data
⢠10K record cycles (typical) for digital data
Options
⢠Available in die form, TSOP and SOIC and PDIP (ISD5116 Only)
⢠Temperature: Commercial â Packaged (0 to +70°C) & die (0 to +50°C); Industrial (-40 to +85°C)
|