[B.C.E. ELECTRONICS]
Floating Connector
When the connector is mounted on the printed circuit board, a location error in the two directions of horizontal and vertical(XY direction) may occur at both connectors. In addition, if each printed circuit board is fixed to a case by screws after mating connectors, the connectors may have to compensate for the location error because a gap occurs during screwing to the printed circuit board. A connector having a tolerance to compensate for such an error or gap caused by vibration is called a floating connector. The DY series is a 0.5mm(0.020) fine pitch connector with ±0.5mm(0.020) floating mechanism and ensures sufficient compensation for location errors.
FEATURES
ⶠLocation error offsets ±0.5mm in the XY direction.
ⶠHigh reliable design with effective mating length of 1.25mm(0.049ââ).
ⶠSuction area for automated mounting provided.
ⶠPositioning posts are optional for manual mounting.
ⶠWide variations of contacts (30, 40, 50, 60, 80, 100, 120 and
140 pins) are available.
*Available pin count varies with the product type.
ⶠVertical and Stacked mating combinations.
ⶠStacked mating heights of 5, 6, 7, 8, 9, 10, 11, 12, 13 and 14mm.
(0.197, 0236, 0.276, 0.315, 0.354, 0.394, 0.433, 0.472, 0.512 and 0.551â)
*Available mating height varies with the product type.
ⶠShape of retention clip forming the large fillet.
*Optional type with a dust cap provided on a plug side is also available.
|