datasheetq language:
Home >>> MaximIC >>> MAX5437 Datasheet

MAX5437 Datasheet

Part NameMAX5437 MaximIC
Maxim Integrated MaximIC
Description±15V, 128-Tap, Low-Drift Digital Potentiometers
MAX5437 Datasheet PDF : MAX5437 pdf     

Image Info : [MaximIC] MAX5436

General Description
The MAX5436–MAX5439 are 128-tap high-voltage (±5V to ±15V) digital potentiometers in packages that are half the size of comparable devices in 8-pin SO. They perform the same function as mechanical potentiometers, but replace the mechanics with a simple digital interface. The digital logic is powered by a separate single +2.7V to +5.25V supply voltage (VCC). The resistor string uses its own analog supplies (VDD and VSS) that require VDD - VSS to be greater than 9V and less than 31.5V. This allows for greater flexibility in voltage ranges that can be used with these devices. Examples of analog supply ranges include not only dual voltages of ±5V to ±15V, but single-supply voltages, such as +10V, +15V, +30V, -30V, and more, as long as the ranges of VDD - VSS and VCC - VSS are met.
The MAX5437/MAX5439 include an on-chip, high voltage, uncommitted amplifier, providing additional reductions in board space and cost. Other features include low 35ppm/°C end-to-end and 5ppm/°C ratio metric resistor temperature coefficients, a 3-wire SPI™/QSPI™/MICROWIRE™-compatible serial interface, and a power-on reset to midscale.
The MAX5436/MAX5438 are available in 10-pin µMAX packages. The MAX5437/MAX5439 are available in 14-pin TSSOP package. Each device is guaranteed over the extended temperature range of -40°C to +85°C.

Features
♦ +10V to +30V Single-Supply Operation
♦ -28V to -10V Single Negative Supply Operation
♦ ±5V to ±15V Dual-Supply Operation
♦ 128 Tap Positions
♦ Uncommitted High-Voltage Amplifier (MAX5437/MAX5439)
♦ Low Temperature Coefficient
   35ppm/°C (End-to-End)
   5ppm/°C (Ratiometric)
♦ Small-Footprint Packages
   10-Pin µMAX (MAX5436/MAX5438)
   14-Pin TSSOP (MAX5437/MAX5439)
♦ Glitchless Switching Between the Resistor Taps
♦ 3-Wire SPI/QSPI/MICROWIRE-Compatible Serial Interface
♦ 50kΩ/100kΩ End-to-End Resistances
♦ Power-On Reset: Wiper Goes to Midscale (Position 64)

Applications
   LCD Screen Contrast Adjustment
   Data-Acquisition Systems
   Mechanical Potentiometer Replacement
   Low-Drift Programmable Gain Amplifier
   Audio Volume Control

Share Link : MaximIC

Language : 한국어   日本語   русский   简体中文   español
@ 2015 - 2017  [ Home  ] [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]