datasheetq language:
Home >>> PMC-Sierra >>> PM8355 Datasheet

PM8355 Datasheet

Part NamePM8355 PMC-Sierra
PMC-Sierra PMC-Sierra
Description4-Channel 2.125, 2.5 and 3.125 Gbit/s Transceiver with Half-rate Support
PM8355 Datasheet PDF : PM8355 pdf   
PM8355 image

GENERAL DESCRIPTION
The QuadPHY-II is a physical layer transceiver ideal for systems requiring high speed point-to-point communication links. It is applicable for PMAPMD connections in 10 GE, Infiniband 1 or 4 x 2.5 Gbit/s links, 1 and 2 Gbit/s Fibre Channel, as well as high speed serial backplanes for high capacity systems.

FEATURES
GENERAL
• 10Gbit/s, bi-directional, XAUI to XGMII link supporting the proposed IEEE 802.3ae (the standard is draft and is subject to change).
• Four independent 2.125, 2.5 and 3.125 Gbit/s Serdes for Fibre Channel, Infiniband, 10 GE line cards and high speed backplane applications.
• Half/Full rate mode selectable per channel.
• Integrated serializer/ deserializer, clock synthesis, clock recovery and 8B/10B encode/decode logic.
• Under 2 Watts typical power.

SERIAL I/O
• Redundant high speed serial I/O channels for convenient switching to redundant fabric.
• High speed outputs with optional preemphasis to drive longer backplanes.
• High speed I/O with on-chip termination resistors to directly drive dual-terminated 50 Ohm lines.

PARALLEL I/O
• 10-bit Dual Data Rate (DDR) parallel interface.
• Selectable source simultaneous or source synchronous transmit and receive parallel interfaces.
• Convenient output clock for user friendly ASIC timing.
• Interoperates with SSTL2 and 1.8V LVCMOS standard.

TRUNKING &TIMING
• Integrated Receive FIFO synchronizes incoming data to local clock domain.
• Trunking feature de-skews and aligns all four channels to form a single 10 Gbit/s logical link

TEST FEATURES
• Extensive control of loopback, BIST, and operating modes via 802.3 compliant MDC/MDIO serial interface.
• On-chip packet generator/checker provides at-speed diagnostics.
• Built-in error counters per channel.
• Support for IEEE 1149.1 JTAG testing on all pins.

PHYSICAL
• 1.8V, 0.18 micron standard CMOS technology with 2.5V tolerant I/O.
• 289-ball PBGA (19mm x 19mm package).

APPLICATIONS
• High speed serial backplanes
• 10 GE links
• Fibre Channel transceivers
• Infiniband transceivers
• XAUI retimers
• Intra-system interconnect

 

Share Link : PMC-Sierra

Other manufacturer searches related to PM8355

PM8355 4-Channel 2.125, 2.5 and 3.125 PM8355 View PMC-Sierra, Inc
PMC-Sierra, Inc  


@ 2015 - 2017  [ Home  ] [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]