256 Megabit, 128 Megabit, 64 Megabit, and 32 Megabit, 3.0 Volt-only Page Mode Flash Memory featuring 0.23 µm MirrorBit Process Technology
General Description
The S29GL256/128/064/032M family of devices are 3.0 V single power Flash memory manufactured using 0.23 µm MirrorBit technology. The S29GL256M is a 256â Mbit, organized as 16,777,216 words or 33,554,432 bytes. The S29GL128M is a 128 Mbit, organized as 8,388,608 words or 16,777,216 bytes. The S29GL064M is a 64 Mbit, organized as 4,194,304 words or 8,388,608 bytes. The S29GL032M is a 32 Mbit, organized as 2,097,152 words or 4,194,304 bytes. Depending on the model number, the devices have an 8-bit wide data bus only, 16-bit wide data bus only, or a 16-bit wide data bus that can also function as an 8-bit wide data bus by using the BYTE# input. The devices can be programmed either in the host system or in standard EPROM programmers.
Distinctive Characteristics
Architectural Advantages
â Single power supply operation
â 3 volt read, erase, and program operations
â Manufactured on 0.23 µm MirrorBit process technology
â Secured Silicon Sector region
â 128-word/256-byte sector for permanent, secure identification through an 8-word/16-byte random Electronic Serial Number, accessible through a command sequence
â May be programmed and locked at the factory or by the customer
â Flexible sector architecture
â 256 Mb: 512 32-Kword (64 Kbyte) sectors
â 128 Mb: 256 32-Kword (64 Kbyte) sectors
â 64 Mb (uniform sector models): 128 32-Kword (64-Kbyte) sectors or 128 32 Kword sectors
â 64 Mb (boot sector models): 127 32-Kword (64-Kbyte) sectors + 8 4Kword (8Kbyte) boot sectors
â 32 Mb (uniform sector models): 64 32-Kword (64-Kbyte) sectors of 64 32-Kword sectors
â 32 Mb (boot sector models): 63 32-Kword (64 Kbyte) sectors + 8 4-Kword (8-Kbyte) boot sectors
â Compatibility with JEDEC standards
â Provides pinout and software compatibility for single power supply flash, and superior inadvertent write protection
â 100,000 erase cycles typical per sector
â 20-year data retention typical
Performance Characteristics
â High performance
â 90 ns access time (128 Mb, 64 Mb, 32 Mb), 100 ns access time (256 Mb)
â 4-word/8-byte page read buffer
â 25 ns page read times (128 Mb, 64 Mb, 32 Mb)
â 30 ns page read times (256 Mb)
â 16-word/32-byte write buffer
â 16-word/32-byte write buffer reduces overall programming time for multiple-word updates
â Low power consumption (typical values at 3.0 V, 5 MHz)
â 18 mA typical active read current (64 Mb, 32 Mb)
â 25 mA typical active read current (256 Mb, 128 Mb)
â 50 mA typical erase/program current
â 1 µA typical standby mode current
â Package options
â 40-pin TSOP
â 48-pin TSOP
â 56-pin TSOP
â 64-ball Fortified BGA
â 48-ball fine-pitch BGA
â 63-ball fine-pitch BGA
Software & Hardware Features
â Software features
â Program Suspend & Resume: read other sectors before programming operation is completed
â Erase Suspend & Resume: read/program other sectors before an erase operation is completed
â Data# polling & toggle bits provide status
â CFI (Common Flash Interface) compliant: allows host system to identify and accommodate multiple flash devices
â Unlock Bypass Program command reduces overall multiple-word programming time
â Hardware features
â Sector Group Protection: hardware-level method of preventing write operations within a sector group
â Temporary Sector Unprotect: VID-level method of charging code in locked sectors
â WP#/ACC input accelerates programming time (when high voltage is applied) for greater throughput during system production. Protects first or last sector regardless of sector protection settings on uniform sector models
â Hardware reset input (RESET#) resets device
â Ready/Busy# output (RY/BY#) detects program or erase cycle completion
|