Description
The SA Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
Features
⢠500W peak pulse capability at 10/1000μs waveform, repetition rate
(duty cycles):0.01%
⢠VBR @ TJ= VBR@25°C x (1+α T x (TJ - 25))
(α T:Temperature Coeffcient, typical value is 0.1%)
⢠Glass passivated chip junction in DO-15 Package
⢠Fast response time: typically less than 1.0ps from 0 Volts to BV min
⢠Excellent clamping capability
⢠Typical failure mode is short from over-specifed voltage or current
⢠Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c
⢠IEC-61000-4-2 ESD 30kV(Air), 30kV (Contact)
⢠ESD protection of data lines in accordance with IEC 61000-4-2
⢠EFT protection of data lines in accordance with IEC 61000-4-4
⢠Low incremental surge resistance
⢠Typical IR less than 1μA when VBR max>13V
⢠High temperature to reï¬ow soldering guaranteed:
260°C/40sec/0.375â,(9.5mm) lead length, 5 lbs., (2.3kg) tension
⢠Plastic package is ï¬ammability rated V-0 per Underwriters Laboratories
⢠Matte tin leadâfree plated
⢠Halogen free and RoHS compliant
⢠Pb-free E3 means 2nd level interconnect is Pb-free and
the terminal fnish material is tin(Sn) (IPC/JEDEC J-STD-609A.01)
Applications
TVS devices are ideal for the protection of I/O interfaces,
VCC bus and other vulnerable circuits used in telecom,
computer, industrial and consumer electronic applications.
|