Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits
Home >>> MaximIC >>> MAX680ESA Datasheet

MAX680ESA Datasheet

Part Name
Description
MFG CO.
MAX680ESA
MaximIC
Maxim Integrated MaximIC
Other PDF
  not available.
PDF
DOWNLOAD     
MAX680ESA image

General Description
The MAX680/MAX681 are monolithic, CMOS, dual charge-pump voltage converters that provide ±10V outputs from a +5V input voltage. The MAX680/MAX681 provide both a positive step-up charge pump to develop +10V from +5V input and an inverting charge pump to generate the -10V output. Both parts have an on-chip, 8kHz oscillator. The MAX681 has the capacitors internal to the package, and the MAX680 requires four external capacitors to produce both positive and negative voltages from a single supply.
The output source impedances are typically 150Ω, providing useful output currents up to 10mA. The low quiescent current and high efficiency make this device suitable for a variety of applications that need both positive and negative voltages generated from a single supply.
The MAX864/MAX865 are also recommended for new designs. The MAX864 operates at up to 200kHz and uses smaller capacitors. The MAX865 comes in the smaller µMAX package.

Features
♦ 95% Voltage-Conversion Efficiency
♦ 85% Power-Conversion Efficiency
♦ +2V to +6V Voltage Range
♦ Only Four External Capacitors Required (MAX680)
♦ No Capacitors Required (MAX681)
♦ 500µA Supply Current
♦ Monolithic CMOS Design

Applications
   The MAX680/MAX681 can be used wherever a singlepositive supply is available and where positive and negative voltages are required. Common applications include generating ±6V from a 3V battery and generating ±10V from the  standard +5V logic supply (for use with analog circuitry). Typical applications include:
   ±6V from 3V Lithium Cell
   Hand-Held Instruments
   Data-Acquisition Systems
   Panel Meters
   ±10V from +5V Logic Supply
   Battery-Operated Equipment
   Operational Amplifier Power Supplies

Page Link's: 1  2  3  4  5  6  7  8 
 

Part Name
Description
PDF
MFG CO.
+5V To ±10V Voltage Converter
Microchip Technology
+5V TO ±10V VOLTAGE CONVERTER
TelCom Semiconductor Inc => Microchip
*5V, +10V Precision Voltage References
Maxim Integrated
10V/5V Low Dropout Dual Regulator with ENABLE
Cherry semiconductor
10V/5V Low Dropout Dual Regulator with Independent Output Enables
ON Semiconductor
(5V,5.6V,8V,9V,10V,12V,15V) 3-TERMINAL FIXED POSITIVE OUTPUT VOLTAGE REGULATOR (WITH FOLD-BACK PROTECTION CIRCUIT)
Mitsumi
10V/5V Low Dropout Dual Regulator with Independent Output Enables
Cherry semiconductor
(5V,5.6V,8V,9V,10V,12V,15V) 3-TERMINAL FIXED POSITIVE OUTPUT VOLTAGE REGULATOR (WITH FOLD-BACK PROTECTION CIRCUIT)
MITSUBISHI ELECTRIC
(5V,5.6V,8V,9V,10V,12V,15V) 3-TERMINAL FIXED POSITIVE OUTPUT VOLTAGE REGULATOR (WITH FOLD-BACK PROTECTION CIRCUIT)
Renesas Electronics
Integrated Circuit Positive 3 Terminal Voltage Regulator, Low Dropout Voltage, 10V, 1A
NTE Electronics

Share Link: 

All Rights Reserved© datasheetq.com  [ Privacy Policy ] [ Request Datasheet ] [ Contact Us ]