Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

P/N + Description + Content Search

Search Word's :
Description : Crystal Clock Oscillator

[SaRonix]

Description
A crystal controlled, low current, low jitter and high frequency oscillator with precise rise and fall times demanded in networking applications. The tri-state function on the NTH enables the output to go high impedance. Device is packaged in a 14 or an 8-pin DIP compatible resistance welded, all metal grounded case to reduce EMI. True SMD DIL14 versions for IR reflow are available, select option "S" in part number builder. See separate data sheet for SMD package dimensions.

Applications & Features
• ADSL, DSL
• DS3, ES3, E1, STS-1, T1
• Ethernet Switch, Gigabit Ethernet
• Fibre Channel Controller
• MPEG
• Network Processors
• Voice Over Packet
• 32 Bit Microprocessors
• Tri-State output on NTH
• LVCMOS / HCMOS compatible
• Available up to 106.25 MHz

Description : FlashFlex MCU

Product Description
The SST89E54RD2A/RDA and SST89E58RD2A/RDA are members of the FlashFlex family of 8-bit Microcontroller products designed and manufactured with SST patented and proprietary SuperFlash CMOS semiconductor process technology. The split-gate cell design and thick-oxide tunneling injector offer significant cost and reliability benefits for SST customers. The devices use the 8051 instruction set and are pin-for-pin compatible with standard 8051 Microcontroller devices.

Features
• 8-bit 8051-Compatible Microcontroller (MCU) with Embedded SuperFlash Memory
   – Fully Software Compatible
   – Development Toolset Compatible
   – Pin-For-Pin Package Compatible
• SST89E5xRD2A Operation
   – 0 to 40 MHz at 5V
• 1 KByte Internal RAM
• Dual Block SuperFlash EEPROM
   – 16/32 KByte primary block + 8 KByte secondary block (128-Byte sector size for both blocks)
   – Individual Block Security Lock with SoftLock
   – Concurrent Operation during In-Application Programming (IAP)
   – Memory Overlay for Interrupt Support during IAP
• Support External Address Range up to 64 KByte of Program and Data Memory
• Three High-Current Drive Ports (16 mA each)
• Three 16-bit Timers/Counters
• Full-Duplex, Enhanced UART
   – Framing Error Detection
   – Automatic Address Recognition
• Ten Interrupt Sources at 4 Priority Levels
   – Four External Interrupt Inputs
Programmable Watchdog Timer (WDT)
Programmable Counter Array (PCA)
• Four 8-bit I/O Ports (32 I/O Pins) and One 4-bit Port
• Second DPTR register
• Low EMI Mode (Inhibit ALE)
• SPI Serial Interface
• Standard 12 Clocks per cycle, the device has an option to double the speed to 6 clocks per cycle.
• TTL- and CMOS-Compatible Logic Levels
• Brown-out Detection
• Low Power Modes
   – Power-down Mode with External Interrupt Wake-up
   – Idle Mode
• Temperature Ranges:
   – Commercial (0°C to +70°C)
• Packages Available
   – 44-lead PLCC
   – 40-pin PDIP (Port 4 feature not available)
   – 44-lead TQFP
• All non-Pb (lead-free) devices are RoHS compliant

Description : FlashFlex51 MCU

PRODUCT DESCRIPTION
The SST89E5xRD2/RD and SST89V5xRD2/RD are members of the FlashFlex family of 8-bit Microcontroller products designed and manufactured with SST’s patented and proprietary SuperFlash CMOS semiconductor process technology. The split-gate cell design and thick-oxide tunneling injector offer significant cost and reliability benefits for SST’s customers. The devices use the 8051 instruction set and are pin-for-pin compatible with standard 8051 Microcontroller devices.

FEATURES:
• 8-bit 8051-Compatible Microcontroller (MCU) with Embedded SuperFlash Memory
    – Fully Software Compatible
    – Development Toolset Compatible
    – Pin-For-Pin Package Compatible
• SST89E5xRD2 Operation
    – 0 to 40 MHz at 5V
• SST89V5xRD2 Operation
    – 0 to 33 MHz at 3V
• 1 KByte Internal RAM
• Dual Block SuperFlash EEPROM
    – 16/32 KByte primary block + 8 KByte secondary block (128-Byte sector size for both blocks)
    – Individual Block Security Lock with SoftLock
    – Concurrent Operation during In-Application Programming (IAP)
    – Memory Overlay for Interrupt Support during IAP
• Support External Address Range up to 64 KByte of Program and Data Memory
• Three High-Current Drive Ports (16 mA each)
• Three 16-bit Timers/Counters
• Full-Duplex, Enhanced UART
    – Framing Error Detection
    – Automatic Address Recognition
• Ten Interrupt Sources at 4 Priority Levels
    – Four External Interrupt Inputs
Programmable Watchdog Timer (WDT)
Programmable Counter Array (PCA)
• Four 8-bit I/O Ports (32 I/O Pins) and One 4-bit Port
• Second DPTR register
• Low EMI Mode (Inhibit ALE)
• SPI Serial Interface
• Standard 12 Clocks per cycle, the device has an option to double the speed to 6 clocks per cycle.
• TTL- and CMOS-Compatible Logic Levels
• Brown-out Detection
• Low Power Modes
    – Power-down Mode with External Interrupt Wake-up
    – Idle Mode
• Temperature Ranges:
    – Commercial (0°C to +70°C)
    – Industrial (-40°C to +85°C)
• Packages Available
    – 40-contact WQFN (Port 4 feature not available)
    – 44-lead PLCC
    – 40-pin PDIP (Port 4 feature not available)
    – 44-lead TQFP
• All non-Pb (lead-free) devices are RoHS compliant

Description : FlashFlex MCU

PRODUCT DESCRIPTION
The SST89E516RDx and SST89V516RDx are members of the FlashFlex family of 8-bit Microcontroller products designed and manufactured with SST’s patented and proprietary SuperFlash CMOS semiconductor process technology. The split-gate cell design and thick-oxide tunneling injector offer significant cost and reliability benefits for SST’s customers. The devices use the 8051 instruction set and are pin-for-pin compatible with standard 8051 Microcontroller devices.
The devices come with 72 KByte of on-chip Flash EEPROM program memory which is partitioned into 2 independent program memory blocks. The primary Block 0 occupies 64 KByte of internal program memory space and the secondary Block 1 occupies 8 KByte of internal program memory space.
The 8-KByte secondary block can be mapped to the lowest location of the 64 KByte address space; it can also be hidden from the program counter and used as an independent EEPROM-like data memory.
In addition to the 72 KByte of EEPROM program memory on-chip and 1024 x8 bits of on-chip RAM, the devices can address up to 64 KByte of external program memory andup to 64 KByte of external RAM.
The Flash memory blocks can be programmed via a standard 87C5x OTP EPROM programmer fitted with a special adapter and the firmware for SST’s devices. During power on reset, the devices can be configured as either a slave to an external host for source code storage or a master to an external host for an in-application programming (IAP) operation. The devices are designed to be programmed in-system and in-application on the printed circuit board for maximum flexibility. The devices are pre-programmed with an example of the bootstrap loader in the memory, demon strating the initial user program code loading or subsequent user code updating via the IAP operation. The sample bootstrap loader is available for the user’s reference and convenience only; SST does not guarantee its functionality or usefulness. Chip-Erase or Block-Erase operations will erase the pre-programmed sample code.

FEATURES:
• 8-bit 8051-Compatible Microcontroller (MCU)
   with Embedded SuperFlash Memory
   – Fully Software Compatible
   – Development Toolset Compatible
   – Pin-For-Pin Package Compatible
• SST89E516RD2 Operation
   – 0 to 40 MHz at 5V
• SST89V516RD2 Operation
   – 0 to 33 MHz at 3V
• 1 KByte Internal RAM
• Dual Block SuperFlash EEPROM
   – 64 KByte primary block +
      8 KByte secondary block
      (128-Byte sector size for both blocks)
   – Individual Block Security Lock with SoftLock
   – Concurrent Operation during
In-Application Programming (IAP)
   – Memory Overlay for Interrupt Support during IAP
• Support External Address Range up to 64
   KByte of Program and Data Memory
• Three High-Current Drive Ports (16 mA each)
• Three 16-bit Timers/Counters
• Full-Duplex, Enhanced UART
   – Framing Error Detection
   – Automatic Address Recognition
• Ten Interrupt Sources at 4 Priority Levels
   – Four External Interrupt Inputs
Programmable Watchdog Timer (WDT)
Programmable Counter Array (PCA)
• Four 8-bit I/O Ports (32 I/O Pins) and
   One 4-bit Port
• Second DPTR register
• Low EMI Mode (Inhibit ALE)
• SPI Serial Interface
• Standard 12 Clocks per cycle, the device has an
   option to double the speed to 6 clocks per cycle.
• TTL- and CMOS-Compatible Logic Levels
• Brown-out Detection
• Low Power Modes
   – Power-down Mode with External Interrupt Wake-up
   – Idle Mode
• Temperature Ranges:
   – Commercial (0°C to +70°C)
   – Industrial (-40°C to +85°C)
• Packages Available
   – 40-contact WQFN (Port 4 feature not available)
   – 44-lead PLCC
   – 40-pin PDIP (Port 4 feature not available)
   – 44-lead TQFP
• All non-Pb (lead-free) devices are RoHS compliant

Description : FlashFlex51 MCU

PRODUCT DESCRIPTION
The SST89E5xRD2/RD and SST89V5xRD2/RD are members of the FlashFlex51 family of 8-bit Microcontroller
products designed and manufactured with SST’s patented and proprietary SuperFlash CMOS semiconductor process technology. The split-gate cell design and thick-oxide tunneling injector offer significant cost and reliability bene fits for SST’s customers. The devices use the 8051 instruc tion set and are pin-for-pin compatible with standard 8051 Microcontroller devices.

FEATURES:
• 8-bit 8051-Compatible Microcontroller (MCU) with Embedded SuperFlash Memory
    – Fully Software Compatible
    – Development Toolset Compatible
    – Pin-For-Pin Package Compatible
• SST89E5xRD2 Operation
    – 0 to 40 MHz at 5V
• SST89V5xRD2 Operation
    – 0 to 33 MHz at 3V
• 1 KByte Internal RAM
• Dual Block SuperFlash EEPROM
    – 8/16/32 KByte primary block + 8 KByte secondary block(128-Byte sector size for both blocks)
    – Individual Block Security Lock with SoftLock
    – Concurrent Operation during In-Application Programming (IAP)
    – Memory Overlay for Interrupt Support during IAP
• Support External Address Range up to 64 KByte of Program and Data Memory
• Three High-Current Drive Ports (16 mA each)
• Three 16-bit Timers/Counters
• Full-Duplex, Enhanced UART
    – Framing Error Detection
    – Automatic Address Recognition
• Ten Interrupt Sources at 4 Priority Levels
    – Four External Interrupt Inputs
Programmable Watchdog Timer (WDT)
Programmable Counter Array (PCA)
• Four 8-bit I/O Ports (32 I/O Pins) and One 4-bit Port
• Second DPTR register
• Low EMI Mode (Inhibit ALE)
• SPI Serial Interface
• Standard 12 Clocks per cycle, the device has an option to double the speed to 6 clocks per cycle.
• TTL- and CMOS-Compatible Logic Levels
• Brown-out Detection
• Low Power Modes
    – Power-down Mode with External Interrupt Wake-up
    – Idle Mode
• Temperature Ranges:
    – Commercial (0°C to +70°C)
    – Industrial (-40°C to +85°C)
• Packages Available
    – 40-contact WQFN (Port 4 feature not available)
    – 44-lead PLCC
    – 40-pin PDIP (Port 4 feature not available)
    – 44-lead TQFP
• All non-Pb (lead-free) devices are RoHS compliant

Description : Polypropylene Pulse/High Frequency Capacitors R76 Series Double Metallized Polypropylene Film, Radial, DC and Pulse Applications (Automotive Grade)

Overview
The R76 Series is constructed of polypropylene film and double metallized polyester film as electrodes with radial leads of tinned wire. The radial leads are electrically welded to the metal layer on the ends of the capacitor winding. The capacitor is encapsulated in a self-extinguishing solvent resistant plastic case with thermosetting resin material meeting the UL 94V–0 requirements.

Benefts
• Voltage range: 250 – 2,000 VDC
• Capacitance range: 100 pF – 15 µF
• Lead Spacing: 7.5 mm – 37.5 mm
• Capacitance tolerance: ±5%, ±10%, ±20%
• Climatic category: 55/105/56 IEC 60068-1
• Operating temperature range of −55˚C to +105˚C
• RoHS compliance and lead-free terminations
• Tape and reel packaging in accordance with IEC 60286–2
• Self-healing
• Automotive (AEC–Q200) grades available up to lead spacing 22.5mm

Description : FlashFlex51 MCU

PRODUCT DESCRIPTION
The SST89E5xxRD2 and SST89V5xxRD2 are members of the FlashFlex51 family of 8-bit Microcontroller products designed and manufactured with SST’s patented and proprietary SuperFlash CMOS semiconductor process technology. The split-gate cell design and thick-oxide tunneling injector offer significant cost and reliability benefits for SST’s customers. The devices use the 8051 instruction set and are pin-for-pin compatible with standard 8051 Microcontroller devices.
The devices come with 16/24/40/72 KByte of on-chip Flash EEPROM program memory which is partitioned into 2 independent program memory blocks. The primary Block 0 occupies 8/16/32/64 KByte of internal program memory space and the secondary Block 1 occupies 8 KByte of internal program memory space.
The 8-KByte secondary block can be mapped to the lowest location of the 8/16/32/64 KByte address space; it can also be hidden from the program counter and used as an independent EEPROM-like data memory.
In addition to the 16/24/40/72 KByte of EEPROM program memory on-chip, the devices can address up to 64 KByte of external program memory. In addition to 1024 x8 bits of on-chip RAM, up to 64 KByte of external RAM can be addressed.

FEATURES:
• 8-bit 8051-Compatible Microcontroller (MCU)
   with Embedded SuperFlash Memory
   – Fully Software Compatible
   – Development Toolset Compatible
   – Pin-For-Pin Package Compatible
• SST89E5xxRD2 Operation
   – 0 to 40 MHz at 5V
• SST89V5xxRD2 Operation
   – 0 to 33 MHz at 3V
• 1 KByte Internal RAM
• Dual Block SuperFlash EEPROM
   – 8/16/32/64 KByte primary block +
      8 KByte secondary block
      (128-Byte sector size for both blocks)
   – Individual Block Security Lock with SoftLock
   – Concurrent Operation during
      In-Application Programming (IAP)
   – Memory Overlay for Interrupt Support during IAP
• Support External Address Range up to 64
   KByte of Program and Data Memory
• Three High-Current Drive Ports (16 mA each)
• Three 16-bit Timers/Counters
• Full-Duplex, Enhanced UART
   – Framing Error Detection
   – Automatic Address Recognition
• Ten Interrupt Sources at 4 Priority Levels
   – Four External Interrupt Inputs
Programmable Watchdog Timer (WDT)
Programmable Counter Array (PCA)
• Four 8-bit I/O Ports (32 I/O Pins) and
   One 4-bit Port
• Second DPTR register
• Low EMI Mode (Inhibit ALE)
• SPI Serial Interface
• Standard 12 Clocks per cycle, the device has an
   option to double the speed to 6 clocks per cycle.
• TTL- and CMOS-Compatible Logic Levels
• Brown-out Detection
• Low Power Modes
   – Power-down Mode with External Interrupt Wake-up
   – Idle Mode
• Temperature Ranges:
   – Commercial (0°C to +70°C)
   – Industrial (-40°C to +85°C)
• Packages Available
   – 44-lead PLCC
   – 40-pin PDIP (Port 4 feature not available)
   – 44-lead TQFP

Description : FlashFlex51 MCU

PRODUCT DESCRIPTION
SST89E564RD, SST89V564RD, SST89E554RC, and SST89V554RC are members of the FlashFlex51 family of 8-bit Microcontrollers. The FlashFlex51 is a family of Microcontroller products designed and manufactured on the state-ofthe-art SuperFlash CMOS semiconductor process technology. The device uses the same powerful instruction set and is pin-for-pin compatible with standard 8xC5x Microcontroller devices.

FEATURES:
• 8-bit 8051 Family Compatible Microcontroller (MCU) with Embedded SuperFlash Memory
• SST89E564RD/SST89E554RC is 5V Operation
    – 0 to 40 MHz Operation at 5V
• SST89V564RD/SST89V554RC is 3V Operation
    – 0 to 25 MHz Operation at 3V
• Fully Software and Development Toolset Compatible as well as Pin-For-Pin Package Compatible with Standard 8xC5x Microcontrollers
• 1 KByte Register/Data RAM
• Dual Block SuperFlash EEPROM
    – SST89E564RD/SST89V564RD: 64 KByte primary block + 8 KByte secondary block (128-Byte sector size)
    – SST89E554RC/SST89V554RC: 32 KByte primary block + 8 KByte secondary block (128-Byte sector size)
    – Individual Block Security Lock
    – Concurrent Operation during In-Application Programming (IAP)
    – Block Address Re-mapping
• Support External Address Range up to 64 KByte of Program and Data Memory
• Three High-Current Drive Pins (16 mA each)
• Three 16-bit Timers/Counters
• Full-Duplex Enhanced UART
    – Framing error detection
    – Automatic address recognition
• Nine Interrupt Sources at 4 Priority Levels
• Watchdog Timer (WDT)
Programmable Counter Array (PCA)
• Four 8-bit I/O Ports (32 I/O Pins)
• Second DPTR register
• Reduce EMI Mode (Inhibit ALE through AUXR SFR)
• SPI Serial Interface
• TTL- and CMOS-Compatible Logic Levels
• Brown-out Detection
• Extended Power-Saving Modes
    – Idle Mode
    – Power Down Mode with External Interrupt Wake-up
    – Standby (Stop Clock) Mode
• PDIP-40, PLCC-44 and TQFP-44 Packages
• Temperature Ranges:
    – Commercial (0°C to +70°C)
    – Industrial (-40°C to +85°C)

Description : Flash flex 51 MCU

PRODUCT DESCRIPTION
SST89E564, SST89V564, SST89E554, and SST89V554 are members of the FlashFlex51 family of 8-bit Microcontrollers. The FlashFlex51 is a family of Microcontroller products designed and manufactured on the state-of-the-art SuperFlash CMOS semiconductor process technology. The device uses the same powerful instruction set and is pin-forpin compatible with standard 8xC5x Microcontroller devices.

FEATURES:
• 8-bit 8051 Family Compatible Microcontroller (MCU) with Embedded SuperFlash Memory
• SST89E564/SST89E554 is 5V Operation
    – 0 to 40 MHz Operation at 5V
• SST89V564/SST89V554 is 3V Operation
    – 0 to 25 MHz Operation at 3V
• Fully Software and Development Toolset Compatible as well as Pin-For-Pin Package Compatible with Standard 8xC5x Microcontrollers
• 1 KByte Register/Data RAM
• Dual Block SuperFlash EEPROM
    – SST89E564/SST89V564: 64 KByte primary block + 8 KByte secondary block (128-Byte sector size)
    – SST89E554/SST89V554: 32 KByte primary block + 8 KByte secondary block (128-Byte sector size)
    – Individual Block Security Lock
    – Concurrent Operation during In-Application Programming (IAP)
    – Block Address Re-mapping
• Support External Address Range up to 64 KByte of Program and Data Memory
• Three High-Current Drive Pins (16 mA each)
• Three 16-bit Timers/Counters
• Full-Duplex Enhanced UART
    – Framing error detection
    – Automatic address recognition
• Eight Interrupt Sources at 4 Priority Levels
• Watchdog Timer (WDT)
• Four 8-bit I/O Ports (32 I/O Pins)
• Second DPTR register
• Reduce EMI Mode (Inhibit ALE through AUXR SFR)
• SPI Serial Interface
• TTL- and CMOS-Compatible Logic Levels
• Brown-out Detection
• Extended Power-Saving Modes
    – Idle Mode
    – Power Down Mode with External Interrupt Wake-up
    – Standby (Stop Clock) Mode
• PDIP-40, PLCC-44 and TQFP-44 Packages
• Temperature Ranges:
    – Commercial (0°C to +70°C)
    – Industrial (-40°C to +85°C)

Description : PCB connectors 2.54 mm Single row / double row Surface mount

PCB connectors 2.54 mm Single row / double row Surface mount

12345678910 Next



All Rights Reserved© datasheetq.com  [Privacy Policy ] [ Request Datasheet] [Contact Us]