Subminiature size saves space on PC boards. Specifcally developed for logic-level applications. Totally sealed body construction prevents contact contamination and allows time- and moneysaving automated soldering and cleaning.
Award-winning STC contact mechanism with benefts unavailable in conventional mechanisms: smoother, positive detent actuation, increased contact stability and unparalleled logic-level reliability. (Additional STC details in Terms & Acronyms; see Supplement section.)
Molded-in, epoxy sealed or ultrasonically welded terminals lock out ﬂux, solvents, and other contaminants. .100” x .100” (2.54mm x 2.54mm) terminal spacing conforms to standard PC board grid spacing. Matching indicators available and shown at the end of Section M.
DESCRIPTIONS The MPT 30 Watt DC/DC Converters will provide a new level of performance with-out the high price and long lead times of other class H or class K devices. Utilizing thick film hybrid technology, industry leading manufacturing techniques and DC/DC converter design expertise, MPT can provide a new source for DC/DC Converters in the commercial, military, aerospace, and space markets. In a 2.125” x 1.125” x 0.400”, pin for pin compatible, hermetically sealed package, the MPT 30 Watt Converters will offer industry standard performance up to 30 Watts at efficiencies up to 83% at the standard military temperature range of –55C to 125C for class H and K devices.
FEATURES • COMMERCIAL, CLASS H and CLASS K SCREENING • PIN FOR PIN COMPATABILITY • 16 – 40 VOLT & 36 – 80 VOLT INPUT RANGES • OUTPUT VOLTAGES TO INCLUDE: 3.3, 5, 12, 15, ±5, ±12, ±15 • FULLY ISOLATED • SHORT CIRCUIT PROTECTION • INPUT UNDERVOLTAGE LOCKOUT • OUTPUT OVERVOLTAGE LIMIT • INHIBIT FUNCTION & OPTIONAL SYNC
These series of fixed-voltage monolithic integrated-circuit voltage regulators are designed for a wide range of applications. These applications include on-card regulation for elimination of noise and distribution problems associated with single-point regulation. In addition, they can be used with power-pass elements to make high current voltage regulators. Each of these regulators can deliver up to 100mA of output current. The internal limit ing and thermal shutdown features of these regulators make them essentially immune to overload. When used as a replacement for a Zener diode-resistor combination, an effective improvement in output impedance can be obtained together with lower-bias current.
· Three-Terminal Regulators
· Maximum Input Voltage : 30V
· Output Voltages of 5V, 12V
· Output Current Up to 100mA
· No External Components
· Internal Thermal Overload Protection
· Internal Short-Circuit Limiting
· Output Voltage Offered in 4% Tolerance
· SOP-8, SOT-89, and TO-92/TO-92A Packages
· Lead Free and Green Devices Available (RoHS Compliant)
DATEL’s TPB Model, 25-40 Watt, triple-output DC/DC power Converters bring you efficient "on-board" power processing in a cost-effective smaller package with a standard pinout. The 2" x 3" TPB "footprint" conforms with the industry-standard pinout and pin geometries of most 3" x 3" devices (a 33% space savings) while delivering as much as 60% more power (40W vs. 25W). Applicable to a wide range of telecom, computer and other OEM applications, TPB Model DC/DC’s operate from four input voltage ranges (10-36V for "Q12" models, 18- 36V for "D24" models, 18-72V for "Q48" models, and 36-72V for "D48" models). Available output voltages are +5 and ±12V or +5 and ±15V.
Features ■ 25/30/35/40W output power ■ Standard pinout! Smaller size! ■ New 2" x 3" package fits 3" x 3" footprint ■ Output voltages: +5V/±12V or +5V/±15V ■ Four input voltage ranges: 10-36V, 18-36V 18-72V, 36-72V ■ High efficiencies (to 86%) ■ Fully isolated, 750Vdc guaranteed ■ Thermal shutdown ■ VOUT trim and on/off control ■ Safety approvals pending ■ Modifications and customs for OEMs
Summary The IMS 6 series of board mountable 6 W DC-DC Converters has been designed according to the latest industry requirements and standards. The Converters are particularly suitable for use in mobile or stationary applications in transport, industry or telecommunications where variable input voltages or high transient voltages are prevalent. Covering a total input voltage range from 18 V DC up to 75 V DC.
6 Watt SMD and through hole DC/DC Converters
Input to output electric strength test up to 2 kV DC Input voltage ranges: 18...36 and 36...75 V DC Single and dual outputs of 5, 12, 15 V DC
• Wide input voltage ranges • Electrical isolation, single and dual outputs • Immunity to IEC/EN 61000-4-2, -3, -4, -5 and -6 • High efficiency (typ. 82%) • Flex power: flexible load distribution • No load and short-circuit proof • High reliability and no derating • Operating ambient temperature –40...+ 71°C • Industrial, alternative and SMD pinout • DIL 24 case with 9.0 mm profile o
Compared to standard 2 Watt packages, space savings of 80% and 77% respectively are achieved by these RTS & RTD 2 Watts SMD-Miniature DC/DC Converters. They have been specifically designed for applications where board space is at a premium since these 2 Watt Converters have only a slightly larger foot print than conventional 1 Watt Converters.
With efficiencies up to 85%, external cooling is not needed, as the full output power is available over the operating temperature range -40°C to +85°C. All Converters have an I/O-Isolation of 1kVDC, or optionally 3kV,
Description Compared to standard 2 Watt packages, space savings of 80% and 77% respectively are achieved by these RTS & RTD 2 Watts SMD-Miniature DC/DC Converters. They have been specifically designed for applications where board space is at a premium since these 2 Watt Converters have only a slightly larger foot print than conventional 1 Watt Converters.
Features Unregulated Converters ● 1kVDC and 3kVDC Isolation Options ● Approved for Medical Applications ● Suitable for Automated Assembly ● High Power Density ● Optional Continuous Short Circuit Protection ● Efficiency to 85 % ● RoHS 5/6 Conform