Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

P/N + Description + Content Search

Search Word's :
Description : DX SERIES HIGH-DENSITY I/O CONNECTORS

General
DX series high-density I/O connector with bellow contacts are perfect for tomorrows miniaturized electronic devices. This new 1.27 mm (0.050") interconnect design enusres positive locking, effortless coupling, terminal protection and EMI reduction in a miniaturized and rugged package.

Applications
   Office Automation, Computers, Communications Equipment, Factory Automation, Home Automation and other commercial applications needing high density interconnections.

Description : AC 30W 90-264VAC 15VDC 2.0A 2.5mm DC STRT

[Cincon]

Features
* Universal Input Range 90-264VAC
* Continuous Short Circuit Protection
* Over Voltage Protection
* Meets EN60601-1 and EN55011 Class B
* CEC LEVEL IV Compliant (Output Cable Length≦ 1800mm) (TR30RAM050: Output Cable Length≦ 1500mm)
* Efficiency & Standby Power Meet LEVEL V (Option) (Output Cable Length≦ 1800mm) (TR30RAM050、 TR30RAM090: Output Cable Length≦ 1220mm)
* Provide PSE Mark

Description : METALLIZED POLYESTER

EFC Series 1313 are metallized polyester capacitors. This series offers the advantage of small size, self healing and low cost. Suggested applications include: medical electronics, telecommunications and high voltage power supplies. Packaging options include: wrap and fill (TF, TC), radial lead box (EFR), axial lead (EC, EF). Application options include: high voltage (HV), "AC" across the line (AC), noise suppression (RC) and switching power supply (SP).
   
1. TEMPERATURE RANGE
    - 55 °C to + 85 °C at rated voltage.
    To 125 °C at 50% derating.
2. CAPACITANCE
    Capacitors < 1.0 MFD shall be measured
    at 1 KHz + 20 HZ. Capacitors >1.0 MFD
    shall be measured at 120 HZ. Measurements
    shall be taken at 25 °C.
3. DIELECTRIC STRENGTH
    At 25 °C, 150% of rated voltage when applied
    terminal to terminal for one minute through a
    current limiting resistance.
4. INSULATION RESISTANCE
    At 25 °C after 2 minutes charge time at rated voltage
    or 500 VDC, whichever is less, the minimum IR shall
    be 30,000 Megohm-Microfarad, but need not exceed
    50,000 Megohms for voltages greater than 50 VDC,
    and 15,000 Megohm-Microfarads, but need not exceed
    30,000 Megohms for 50 VDC or less.
5. HUMIDITY RESISTANCE
    Series 1313 shall meet the requirements
    of MIL-STD. 202C, Method 103B.
6. DISSIPATION FACTOR
    Shall be 1.0 % max. when measured as in Par. 2.
7. LIFE TEST
    Will withstand the application of 150% rated voltage at +125 °C for 250 hours
    with not more than one failure in 12 permitted.
   

Description : Surface Mount Transient Voltage Suppressor

Surface Mount Transient Voltage Suppressor
Voltage Range 6.8 to 200 Volts 1500 Watts Peak Power

Features
◇ For surface mounted application in order to optimize board space
◇ Low profile package 
◇ Built-in strain relief
◇ Glass passivated junction
◇ Excellent clamping capability
◇ Fast response time: Typically less than 1.0ps from 0 volt to BV min.
◇ Typical IRless than 1μA above 10V
◇ High temperature soldering guaranteed:  260OC / 10 seconds at terminals
◇ Plastic material used carries Underwriters Laboratory
   Flammability Classification 94V-0
◇ 1500 watts peak pulse power capability with a 10 X 1000 us
   waveform by 0.01% duty cycle

Description : 1500W TRANSIENT VOLTAGE SUPPRESSORS

Features
● Glass Passivated Die Construction
● 1500W Peak Pulse Power Dissipation
● 6.8V – 440V Standoff Voltage
● Uni- and Bi-Directional Versions Available
● Excellent Clamping Capability
● Fast Response Time
● Plastic Case Material has UL Flammability
   Classification Rating 94V-O

Description : 1500W TRANSIENT VOLTAGE SUPPRESSORS

Features
● Glass Passivated Die Construction
● 1500W Peak Pulse Power Dissipation
● 6.8V – 440V Standoff Voltage
● Uni- and Bi-Directional Versions Available
● Excellent Clamping Capability
● Fast Response Time
● Plastic Case Material has UL Flammability Classification Rating 94V-O

Description : 1.27mm Pitch Multi-function Two Piece Connector

■ Features

1. Various connection with various product line

2. Easy One-Touch Operation

   The ribbon cable connection type allows easy one-touch operation with either single hand.

3. Board to board type

   ① Flux swell prevention

      The straight through hole type takes the complete fluxtight action from the board back side at solder dipping. The type is prepared, corresponding to whether or not cleaning is required.

   ② Stack height 12mm to 16mm

      The board stack height can be set to every 1 mm unit up to 12 to 16mm.

   ③ Mis-insertion preventive mechanism

      The mating area is designed in a mechanism so as to prevent mis-insertion, and complete countermeasures have been taken aGAINst wrenching.

4. Board to cable type

   ① Complete lock with easy operation

      Employing the inner lock system, complete lock and eject actions can be performed with easy operation.

   ② Applicable cable

      The applicable cable is the AWG#28 flat cable (7/0.127mm), and the jacket size is 0.9±0.1mm.

5. SMT type

   Strength security with metaltab

      The right angle type is equipped with metaltab to secure soldering strength, and constructed so as to fix by screws. The straight type can choose whether or not metaltab are required.

  

■ Applications

  Computers, peripheral equipments, various machines etc.



 


Description : 1500 Watt Transient Voltage Suppressors 6.8V to 550 Volts

Features

• Economical Series and Quick Response

• Available in Both Unidirectional and Bidirectional Construction

• 1500Watts Peak Power Dissipation

• Excellent Clamping Capability

• Lead Free Finish/RoHS Compliant(Note 1) ("P" Suffix designates RoHS Compliant. See ordering information)

• UL Recognized File#E331408

• Epoxy meets UL 94 V-0 flammability rating

• Moisture Sensitivity LEVEL 1



 


Description : 1500 WATT AXIAL TRANSIENT VOLTAGE SUPPRESSORS

Protect sensitive electronics aGAINst voltage transients induced by inductive load switching and lightning. Ideal for the protection of I/O interfaces, Vcc bus, and other integrated circuits used in telecom, computer, datacom and industrial electronics.

FEATURES
● Breakdown voltage range 6.8 to 440 Volts
● Uni-directional and Bi-directional
● Glass passivated junction
● Low clamping factor
● 100% surge tested
● UL recognised

Description : Surface Mount TRANSZORB® Transient Voltage Suppressors

FEATURES
• Low profile package
• Ideal for automated placement
• Glass passivated chip junction
• Available in uni-directional and bi-directional
• 1500 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle): 0.01 %
• Excellent clamping capability
• Very fast response time
• Low incremental surge resistance
• Meets MSL LEVEL 1, per J-STD-020, LF maximum peak of 260 °C
• AEC-Q101 qualified available
   - Automotive ordering code: base P/NHE3 or P/NHM3
• Material categorization: for definitions of compliance please see www.vishay.com/doc?99912

TYPICAL APPLICATIONS
   Use in sensitive electronics protection aGAINst voltage transients induced by inductive load switching and lightning on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, automotive, and telecommunication.

12345678910 Next



All Rights Reserved© datasheetq.com  [Privacy Policy ] [ Request Datasheet] [Contact Us]