Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

P/N + Description + Content Search

Search Word's :
Description : Low Jitter Frequency Translator

Description
The FX-500 is a complete crystal-based frequency translator used in communications applications where low jitter is paramount.
Performance advantages include superior jitter per formance, high output frequencies and small pack age size. Advanced custom ASIC technology results in a highly robust, reliable and predictable device.
The device is packaged in a 6 pin J-Lead ceramic package with a hermetic seam welded lid.

Features
• Complete Frequency Translator to 77.760 MHz
• 3.3 Volt or 5.0 Volt Supply
• Capable of locking to an 8 kHz pulse/ BITS clock
• Tri-State Output allows board test
• Lock Detect
• J-Lead Ceramic Package
• Advanced Custom ASIC Technology
• Absolute Pull Range Performance to ±100 ppm
• CMOS Output
• Commercial or Industrial Temperature Range
• EIA Compatible Tape and Reel Packaging

Applications
• Frequency Translation, Clock Smoothing
• Telecom - SONET/SDH/ATM/DWDM
• Datacom - DSLAM, DSLAR, Access Nodes
• Cable Modem Head End
• Base Station - GSM, CDMA

Description : VOLTAGE Controlled SAW Oscillator

Description
The VS-500 is a SAW based VOLTAGE controlled oscillator that operates at the fundamental frequency of the internal SAW filter. This resonator is a high Q quartz device that enables the circuit to achieve low phase jitter performance over a wide operating temperature range. The oscillator is housed in a hermetically sealed J-lead surface mount package offered on tape and reel. It has an output disable to facilitate on-board testing.

Features
• Improved High Performance ASIC
• Industry Standard Package, 9 x 14 x 4.5 mm
• Output Frequencies from 155 MHz to 850 MHz
• 3.3 V or 5.0 V Operation
• At 155.52 MHz, Jitter < 0.50 ps-rms (12 kHz to 20 MHz)
• At 622.08 MHz, Jitter < 0.30 ps-rms (50 kHz to 80 MHz)
• LV-PECL, PECL, or ECL Configurations
• Complementary Outputs
• Output Disable Feature

Applications
PLL circuits for Clock Smoothing and Frequency Translation
     Description                   Standard
   • 10G Fibre Channel      INCITS/T11 Project 1413-D
   • 10GbE LAN / WAN      IEEE 802.3ae
   • OC-192                        ITU-T G.709
   • SONET / SDH             GR-253-CORE Issue3

Description : VOLTAGE Controlled SAW Oscillator

Description
The VS-500 is a SAW based VOLTAGE controlled oscillator that operates at the fundamental frequency of the internal SAW filter. This resonator is a high Q quartz device that enables the circuit to achieve low phase jitter performance over a wide operating temperature range. The oscillator is housed in a hermetically sealed J-lead surface mount package offered on tape and reel. It has an output disable to facilitate on-board testing.

Features
• Improved High Performance ASIC
• Industry Standard Package, 9 x 14 x 4.5 mm
• Output Frequencies from 155 MHz to 850 MHz
• 3.3 V or 5.0 V Operation
• At 155.52 MHz, Jitter < 0.50 ps-rms (12 kHz to 20 MHz)
• At 622.08 MHz, Jitter < 0.30 ps-rms (50 kHz to 80 MHz)
• LV-PECL, PECL, or ECL Configurations
• Complementary Outputs
• Output Disable Feature

Applications
PLL circuits for Clock Smoothing and Frequency Translation
    Description                          Standard
• 10G Fibre Channel                INCITS/T11 Project 1413-D
• 10GbE LAN / WAN                IEEE 802.3ae
• OC-192                                  ITU-T G.709
• SONET / SDH                       GR-253-CORE Issue3

Description : THROUGH-HOLE BOARD STACKERS

[Samtec]

THROUGH-HOLE BOARD STACKERS

SPECIFICATIONS
    For complete specifi cations see www.samtec.com?TW-TH
    Insulator Material: Black Liquid Crystal Polymer
    Terminal Material: Phosphor Bronze
    Plating: Sn or Au over 50µ" (1,27 µm) Ni
    Current Rating: 3A per contact @ 80°C ambient
    Operating Temp Range: -55°C to +105°C with Tin; -55°C to +125°C with Gold
    RoHS Compliant: Yes
    Lead–Free Solderable: Yes

Description : Basic-type Digital Temperature Controller

New 96 x 96-mm and 48 x 96-mm Basic Temperature Controllers with Enhanced Functions and Performance. Improved Indication Accuracy and Preventive Maintenance Function.



• Indication Accuracy Thermocouple input: ±0.3% of PV (previous models: ±0.5%) Pt input: ±0.2% of PV (previous models: ±0.5%) Analog input: ±0.2% FS (previous models: ±0.5%)

• A PV/SV-status display function can be set to automatically alternate between displaying the status of the Temperature Controller (auto/manual, RUN/STOP, and alarms) and the PV or SV.

• Preventive maintenance for relays in the Temperature Controller using a Control Output ON/OFF Counter.

• Three-level display that simultaneously displays the PV, SV, and MV.

• One-touch operation with PF Key that can be assigned to auto/manual, RUN/STOP, or other functions.


Description : 2 Mbit ROM + 1 Mbit / 2Mbit / 256 Kbit SRAM ROM/RAM Combo

PRODUCT DESCRIPTION
The SST30VR021/022/023 are ROM/RAM combo chips consisting of 2 Mbit Read Only Memory organized as 256 KBytes and Static Random Access Memory organized as 128, 256, and 32 KBytes.

FEATURES:
• ROM + SRAM ROM/RAM Combo
    – SST30VR021: 256K x8 ROM + 128K x8 SRAM
    – SST30VR022: 256K x8 ROM + 256K x8 SRAM
    – SST30VR023: 256K x8 ROM + 32K x8 SRAM
• ROM/RAM combo on a monolithic chip
• Equivalent ComboMemory (Flash + SRAM): SST31LF021E for code development and pre-production
• Wide Operating VOLTAGE Range: 2.7-3.3V
• Chip Access Time
    – SST30VR022 70 ns
    – SST30VR021/023 500 ns
• Low POWER Dissipation:
    – Standby: 3 µW (Typical)
    – Operating: 10 mW (Typical)
• Fully Static Operation
    – No clock or refresh required
• Three state Outputs
• Packages Available
    – 32-pin TSOP (8mm x14mm)

Description : Lamp Holders & Accessories PRESS TO TEST IND

[Dialight]

Important notes about Classic Panel Mount Indicator Catalog Pages

This catalog page is out-of-print and is used with the understanding that the information shown could be out-of-date. In many cases, part numbers shown on this page are discontinued. Most notably, many “Complete Assembly” parts, which consist of a cap and a base, can no longer be ordered by the 14-digit ordering code. To obtain these parts, please order the cap and base part numbers separately. This process provides the components contained with the original “Complete Assembly” part number.

All Dialight Classic Panel Mount Indicators need a leading 3-digit numerical series. In some cases, this catalog will show a 2-digit series. In this case, please add a leading zero. For example, 81-0211-300 becomes 081-0211-300.

Part numbers listed on Dialight catalog pages designate parts with Red lenses. For ordering lens colors other than red, consult the chart below. In most cases, the color is dictated by the 7th digit. For example, 095-0932-003 for a green cap.

Description : Single Channel, High Speed Optocouplers

[HP]

Description
These diode-transistor optocouplers use an insulating layer between a LED and an integrated photodetector to provide electrical insulation between input and output. Separate connections for the photodiode bias and output-transistor collector increase the speed up to a hundred times that of a conventional phototransistor coupler by reducing the base-collector capacitance.

Features
• 15 kV/µs Minimum Common
Mode TRANSIENT Immunity at VCM = 1500 V (4503/0453)
• High Speed: 1 Mb/s
• TTL Compatible
• Available in 8-Pin DIP, SO-8, Widebody Packages
• Open Collector Output
• Guaranteed Performance from Temperature: 0°C to 70°C
• Safety Approval
    UL Recognized – 3750 V rms for 1 minute (5000 V rms for 1 minute for HCNW and Option 020 devices) per UL1577
    CSA Approved
    IEC/EN/DIN EN 60747-5-2
    Approved
        –VIORM = 630 V PEAK for HCPL-4503#060
        –VIORM = 1414 V PEAK for HCNW devices
• Dual Channel Version Available (253X/4534/053X/ 0534)
• MIL-PRF-38534 Hermetic Version Available (55XX/ 65XX/4N55)

Applications
• High VOLTAGE Insulation
• Video Signal Isolation
POWER Transistor Isolation in Motor Drives
• Line Receivers
• Feedback Element in Switched Mode POWER Supplies
• High Speed Logic Ground Isolation – TTL/TTL, TTL/CMOS, TTL/LSTTL
• Replaces Pulse Transformers
• Replaces Slow Phototransistor Isolators
• Analog Signal Ground Isolation

Description : Advanced Digital Temperature Controller

A New High-performance Controller: High Resolution, High Speed, and High Input Accuracy. Logic Operations and Preventive Maintenance Function. Plus Infrared Port on Front Panel.



• High-resolution display with 5 digits/0.01°C display.

• High-speed sampling cycle of 60 ms.

• High Accuracy

     Thermocouple/Pt input: ±0.1% of PV

     Analog input: ±0.1% FS

• Universal inputs on all models (thermocouple, PT, or analog input) to handle various sensors with one Controller. Models also available with Remote SP.

• A PV/SV-status display function can be set to automatically alternate between displaying the status of the Temperature Controller (auto/manual, RUN/STOP, and alarms) and the PV or SV.

• Flexible contact outputs with logic operations (AND, OR, and delays) set from the Support Software (CX-Thermo Ver. 4.0)

• Preventive maintenance for relays in the Temperature Controller using a Control Output ON/OFF Counter.

• Model available with position-proportional control


Description : Very High CMR, Wide VCC Logic Gate Optocouplers

Description

The HCPL-22XX, HCPL-02XX, and HCNW22XX are optically coupled logic gates. The HCPL-22XX, and HCPL-02XX contain a GaAsP LED while the HCNW22XX contains an AlGaAs LED. The detectors have totempole output stages and optical receiver input stages with built-in Schmitt triggers to provide logic compatible waveforms, eliminat ing the need for additional waveshaping.



Features

• 10 kV/µs Minimum Common Mode Rejection (CMR) at VCM = 1000 V(HCPL-2211/2212/0211/2232, HCNW2211)

• Wide Operating VCC Range: 4.5 to 20 Volts

• 300 ns Propagation Delay Guaranteed over the Full Temperature Range

• 5 Mbd Typical Signal Rate

• Low Input Current (1.6 mA to 1.8 mA)

• Hysteresis

• Totem Pole Output (No Pullup Resistor Required)

• Available in 8-Pin DIP, SOIC-8, Widebody Packages

• Guaranteed Performance from -40°C to 85°C

• Safety Approval

   UL Recognized -2500 V rms

   for 1 minute (5000 V rms

   for 1 minute for HCNW22XX) per UL1577 CSA Approved VDE 0884 Approved with VIORM = 630 V PEAK (HCPL-2211/2212 Option 060 only) and VIORM = 1414 V PEAK (HCNW22XX only) BSI Certified (HCNW22XX only)

• MIL-STD-1772 Version Available (HCPL-52XX/62XX)



Applications

• Isolation of High Speed Logic Systems

• Computer-Peripheral Interfaces

• Microprocessor System Interfaces

• Ground Loop Elimination

• Pulse Transformer Replacement

• High Speed Line Receiver

POWER Control Systems



 


12345678910 Next



All Rights Reserved© datasheetq.com  [Privacy Policy ] [ Request Datasheet] [Contact Us]