Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

P/N + Description + Content Search

Search Word's :
Description : Voltage Controlled Crystal Oscillator

Description
Vectron’s V-Type Voltage Controlled Crystal Oscillator (VCXO) is a quartz stabilized square wave generator with a CMOS output and is tested at CMOS and TTL (5.0 volt operation) logic levels.
The V-Type’s small footprint and low profile make it ideally suitable for PCMCIA applications as well as any other where size is limited but performance is required.

Features
• Output frequencies to 80.000 MHz
• 5.0 or 3.3 V operation
• Tri-State Output
• Low jitter < 6ps rms
• VCXO with CMOS outputs
• APR to 100 ppm
• 0/70 or –40/85 °C temperature range
• Hermetically sealed ceramic SMD package

Applications
• SONET/SDH
• DWDM
• xDSL/PCMCIA cards
• Digital Video

Description : 1.25 Gbps Single Mode Transceiver

Features
• SC Duplex Single Mode Transceiver
• Industry Standard 1x9 Footprint
• Gigabit Ethernet Compliant
• Single +3.3/5V Power Supply
• PECL Differential Inputs and Outputs
• PECL/LVPECL Signal Detection Output [C-13-1250-T(3)-SSC(2)]
• TTL/LVTTL Signal Detection Output [C-13-1250C-T(3)-SSC(2)]
• Wave Solderable and Aqueous Washable
• Uncooled laser diode with MQW structure
• Complies with Telcordia (Bellcore) GR-468-CORE
• Gigabit Ethernet Application
• RoHS compliance available

Description : 400W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Features
• 400W Peak Pulse Power Dissipation
• Glass Passivated Die Construction
• Unidirectional and Bidirectional Versions Available
• Excellent Clamping Capability
• Fast Response Time
• Lead Free Finish/RoHS Compliant (Note 1)
• Green Molding Compound (No Halogen and Antimony) (Note 2)

Description : Crystal Clock Oscillator

[SaRonix]

Description
A crystal controlled, low current, low jitter and high frequency oscillator with precise rise and fall times demanded in networking applications. The tri-state function on the NTH enables the output to go high impedance. Device is packaged in a 14 or an 8-pin DIP compatible resistance welded, all metal grounded case to reduce EMI. True SMD DIL14 versions for IR reflow are available, select option "S" in part number builder. See separate data sheet for SMD package dimensions.

Applications & Features
• ADSL, DSL
• DS3, ES3, E1, STS-1, T1
• Ethernet Switch, Gigabit Ethernet
• Fibre Channel Controller
• MPEG
• Network Processors
• Voice Over Packet
• 32 Bit Microprocessors
• Tri-State output on NTH
• LVCMOS / HCMOS compatible
• Available up to 106.25 MHz

Description : 600W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

Features
• 600W Peak Pulse Power Dissipation
• 5.0V - 170V Standoff Voltages
• Glass Passivated Die Construction
• Uni- and Bi-Directional Versions Available
• Excellent Clamping Capability
• Fast Response Time
• Lead Free Finish/RoHS Compliant (Note 1)
• Green Molding Compound (No Halogen and Antimony) (Note 2)

Description : FlashFlex MCU

Product Description
The SST89E54RD2A/RDA and SST89E58RD2A/RDA are members of the FlashFlex family of 8-bit microcontroller products designed and manufactured with SST patented and proprietary SuperFlash CMOS semiconductor process technology. The split-gate cell design and thick-oxide tunneling injector offer significant cost and reliability benefits for SST customers. The devices use the 8051 instruction set and are pin-for-pin compatible with standard 8051 microcontroller devices.

Features
• 8-bit 8051-Compatible Microcontroller (MCU) with Embedded SuperFlash Memory
   – Fully Software Compatible
   – Development Toolset Compatible
   – Pin-For-Pin Package Compatible
• SST89E5xRD2A Operation
   – 0 to 40 MHz at 5V
• 1 KByte Internal RAM
• Dual Block SuperFlash EEPROM
   – 16/32 KByte primary block + 8 KByte secondary block (128-Byte sector size for both blocks)
   – Individual Block Security Lock with SoftLock
   – Concurrent Operation during In-Application Programming (IAP)
   – Memory Overlay for Interrupt Support during IAP
• Support External Address Range up to 64 KByte of Program and Data Memory
• Three High-Current Drive Ports (16 mA each)
• Three 16-bit Timers/Counters
• Full-Duplex, Enhanced UART
   – Framing Error Detection
   – Automatic Address Recognition
• Ten Interrupt Sources at 4 Priority Levels
   – Four External Interrupt Inputs
• Programmable Watchdog Timer (WDT)
• Programmable Counter Array (PCA)
• Four 8-bit I/O Ports (32 I/O Pins) and One 4-bit Port
• Second DPTR register
• Low EMI Mode (Inhibit ALE)
• SPI Serial Interface
• Standard 12 Clocks per cycle, the device has an option to double the speed to 6 clocks per cycle.
• TTL- and CMOS-Compatible Logic Levels
• Brown-out Detection
• Low Power Modes
   – Power-down Mode with External Interrupt Wake-up
   – Idle Mode
• Temperature Ranges:
   – Commercial (0°C to +70°C)
• Packages Available
   – 44-lead PLCC
   – 40-pin PDIP (Port 4 feature not available)
   – 44-lead TQFP
• All non-Pb (lead-free) devices are RoHS compliant

Description : DDR2 Registered Memory MODULEs

Description
The INFINEON HYS72Taaabcd[G/H]R MODULE family are low profile Registered DIMM MODULEs with 30,00 mm height based on DDR2 technology. DIMMs are available in 64M x 72 (512MByte), 128M x 72 (1GByte) and 256M x 72 (2GByte) organisation and density, intended for mounting into 240 pin connector sockets.

Low Profile 240-pin Registered DDR2 SDRAM MODULEs
512 MByte, 1 GByte & 2 GByte MODULEs PC2-3200R, PC2-4300R

• 240-pin Registered 8-Byte ECC Dual-In-Line DDR2 SDRAM MODULE for PC, Workstation and Server main memory applications
• One rank 64Mb x 72, 128Mb x 72 and two ranks 128Mb × 72 and 256Mb x 72 organizations
• JEDEC standard Double Data Rate 2 Synchronous DRAMs (DDR2 SDRAMs) with + 1.8 V (± 0.1 V) power supply
• 512MB and 1 GB MODULEsMODULEs built with 512Mb DDR2 SDRAMs in 60-ball FBGA chipsize packages
• Two versions of 2 GB MODULEs built with 63-ball FBGA dual die chipsize packages (2 x 512Mb components) or 60-ball FBGA packages
• Programmable CAS Latencies (3, 4 & 5), Burst Length (4 & 8) and Burst Type.
• Auto Refresh and Self Refresh
• All inputs and outputs SSTL_1.8 compatible
• Re-drive for all input signals using register and PLL devices.
• OCD (Off-Chip Driver Impedance Adjustment) and ODT (On-Die Termination)
• Serial Presence Detect with E2PROM
• Low Profile MODULEs form factor: 133.35 mm x 30,00 mm (MO-237)
• Based on JEDEC standard reference card designs

Description : FlashFlex51 MCU

PRODUCT DESCRIPTION
The SST89E5xRD2/RD and SST89V5xRD2/RD are members of the FlashFlex family of 8-bit microcontroller products designed and manufactured with SST’s patented and proprietary SuperFlash CMOS semiconductor process technology. The split-gate cell design and thick-oxide tunneling injector offer significant cost and reliability benefits for SST’s customers. The devices use the 8051 instruction set and are pin-for-pin compatible with standard 8051 microcontroller devices.

FEATURES:
• 8-bit 8051-Compatible Microcontroller (MCU) with Embedded SuperFlash Memory
    – Fully Software Compatible
    – Development Toolset Compatible
    – Pin-For-Pin Package Compatible
• SST89E5xRD2 Operation
    – 0 to 40 MHz at 5V
• SST89V5xRD2 Operation
    – 0 to 33 MHz at 3V
• 1 KByte Internal RAM
• Dual Block SuperFlash EEPROM
    – 16/32 KByte primary block + 8 KByte secondary block (128-Byte sector size for both blocks)
    – Individual Block Security Lock with SoftLock
    – Concurrent Operation during In-Application Programming (IAP)
    – Memory Overlay for Interrupt Support during IAP
• Support External Address Range up to 64 KByte of Program and Data Memory
• Three High-Current Drive Ports (16 mA each)
• Three 16-bit Timers/Counters
• Full-Duplex, Enhanced UART
    – Framing Error Detection
    – Automatic Address Recognition
• Ten Interrupt Sources at 4 Priority Levels
    – Four External Interrupt Inputs
• Programmable Watchdog Timer (WDT)
• Programmable Counter Array (PCA)
• Four 8-bit I/O Ports (32 I/O Pins) and One 4-bit Port
• Second DPTR register
• Low EMI Mode (Inhibit ALE)
• SPI Serial Interface
• Standard 12 Clocks per cycle, the device has an option to double the speed to 6 clocks per cycle.
• TTL- and CMOS-Compatible Logic Levels
• Brown-out Detection
• Low Power Modes
    – Power-down Mode with External Interrupt Wake-up
    – Idle Mode
• Temperature Ranges:
    – Commercial (0°C to +70°C)
    – Industrial (-40°C to +85°C)
• Packages Available
    – 40-contact WQFN (Port 4 feature not available)
    – 44-lead PLCC
    – 40-pin PDIP (Port 4 feature not available)
    – 44-lead TQFP
• All non-Pb (lead-free) devices are RoHS compliant

Description : 1.25 Gbps bi-directional SC Receptacle single Fiber Transceiver

Features
• Single Mode Single Fiber 2x5 SFF SC Receptacle connector
• Gigabit Ethernet Compliant
• Single +3.3V Power Supply
• Tx 1310nm/Rx 1550 nm [B-13/15-1250C-F(DFB)-SSCx]
• Tx 1550nm/Rx 1310 nm [B-15/13-1250C-F(DFB)-SSCx]
• LVPECL Differential Inputs and Outputs
• LVTTL Signal Detection Output
• Class 1 Laser Int. Safety Standard IEC-825 Compliant
• EMI Shielding Finger Optional
• RoHS compliance available

Description : FlashFlex MCU

PRODUCT DESCRIPTION

The SST89E516RDx and SST89V516RDx are members of the FlashFlex family of 8-bit microcontroller products designed and manufactured with SST’s patented and proprietary SuperFlash CMOS semiconductor process technology. The split-gate cell design and thick-oxide tunneling injector offer significant costand reliability benefits for SST’s customers. The devices use the 8051 instruction set and are pin-for-pin compatible with standard 8051 microcontrol ler devices.



FEATURES:

• 8-bit 8051-Compatible Microcontroller (MCU) with Embedded SuperFlash Memory

– Fully Software Compatible

– Development Toolset Compatible

– Pin-For-Pin Package Compatible

• SST89E516RD2 Operation

– 0 to 40 MHz at 5V

• SST89V516RD2 Operation

– 0 to 33 MHz at 3V

• 1 KByte Internal RAM

• Dual Block SuperFlash EEPROM

– 64 KByte primary block + 8 KByte secondary block (128-Byte sector size for both blocks)

– Individual Block Security Lock with SoftLock

– Concurrent Operation during In-Application Programming (IAP)

– Memory Overlay for Interrupt Support during IAP

• Support External Address Range up to 64 KByte of Program and Data Memory

• Three High-Current Drive Ports (16 mA each)

• Three 16-bit Timers/Counters

• Full-Duplex, Enhanced UART

– Framing Error Detection

– Automatic Address Recognition

• Ten Interrupt Sources at 4 Priority Levels

– Four External Interrupt Inputs

• Programmable Watchdog Timer (WDT)

• Programmable Counter Array (PCA)

• Four 8-bit I/O Ports (32 I/O Pins) and One 4-bit Port

• Second DPTR register

• Low EMI Mode (Inhibit ALE)

• SPI Serial Interface

• Standard 12 Clocks per cycle, the device has an option to double the speed to 6 clocks per cycle.

• TTL- and CMOS-Compatible Logic Levels

• Brown-out Detection

• Low Power Modes

– Power-down Mode with External Interrupt Wake-up

– Idle Mode

• Temperature Ranges:

– Commercial (0°C to +70°C)

– Industrial (-40°C to +85°C)

• Packages Available

– 40-contact WQFN (Port 4 feature not available)

– 44-lead PLCC

– 40-pin PDIP (Port 4 feature not available)

– 44-lead TQFP

• All non-Pb (lead-free) devices are RoHS compliant


12345678910 Next



All Rights Reserved© datasheetq.com  [Privacy Policy ] [ Request Datasheet] [Contact Us]