DA Series

• General purpose Line Filters for DC applications up
   to 125VDC.
• Compact with a 3-pin Inlet connector
• Available in 3, 6, 10 and 15A versions
• Flange mount with 1/4” or PCB terminals
• Mates with a standard MOLEX* connector
   (HCS Series)

DA Series

• General purpose Line Filters for DC applications up
   to 125VDC.
• Compact with a 3-pin Inlet connector
• Available in 3, 6, 10 and 15A versions
• Flange mount with 1/4” or PCB terminals
• Mates with a standard MOLEX* connector
   (HCS Series)

DA Series

The DA Series Filters were designed as general purpose Line Filters for DC applications up to 125VDC. They are Compact with a 3-pin Inlet connector. They are available in 3, 6, 10 and 15 amp versions. They are flange mount with 1/4” or PCB terminals.
The DA Series addresses the increasing need for DC rated Filters with a standard DC power Inlet. It was designed and first used for communication oriented customer premises equipment and central office equipment, but is not restricted to that. Any internal DC Connection within larger multi-component systems, or external DC Connection between user installed components which require Filtering will benefit. Some examples include desktop servers, routers, switches, multiplexors, aggregators, concentrators, process control equipment as well as DC powered peripheral equipment.
The DA Series mates with a standard MOLEX connector (HCS Series) which is readily available and better prevents accidental Connection to AC power.

ED Series

• Two element circuit provides medium attenuation
• Available with an internal ground-circuit inductor (C versions) to isolate equipment chassis from power Line ground at radio frequencies
• Versions up to 15A*
• Similar to EEJ Series with alternative termination options
• See the EC Series for better differential mode performance

1.8watt 24pins DIP/DIL package
100/200 series

Feature:
l  Low Cost
l  Miniature DIP/DIL Package
l  500Vdc Input/Output Isolation
l  Single and Dual Outputs
l  No External Components required
l  Low Profile and Compact Size

[YCL]

Feature:
● Low Cost
● Miniature DIP/DIL Package
● 500Vdc Input/Output Isolation
● Single and Dual Outputs
● No External Components required
● Low Profile and Compact Size

Power Entry Modules with Line Filter

Description
- Panel Mount:
   Screw-on mounting from front side
- 3 Functions:
   Appliance Inlet Protection class I, Line Switch 2-pole,
   Line Filter in standard and medical version
- Quick connect terminals 6.3 x 0.8 mm
- Alternative: version without Line Filter EC11

Product Description

CAMD’s PRC201/211/221 Tapped Filter is designed to suppress EMI/RFI noise on high speed data Lines and at I/O ports of PCMCIA fax/modem and LAN type cards. This integrated thin film resistor-capacitor network is housed in a ultra low profile, surface mount package suitable for bottom side mounting to the card which minimizes space and routing problems and improves reliability.

Features

• 8 EMI/RFI protection Lines/package

• Stable resistor-capacitor network

• No signal delays

• Saves board space and component cost

• Suitable for PCMCIA interface cards

Applications

• EMI/RFI Filter

• Low Pass Filter

Product Description
High speed microprocessors like Intel’s Pentium® Pro Processor, demand unique, high speed bus termination schemes. The PACR6G series network provides 18 terminations per package. Four termination resistor values are available. The 47, 50 and 56 ohm terminations are suitable for use with the Intel server chip set and the 68 ohm termination is suitable for use with the Intel desktop chip set. The tight resistor tolerance minimizes noise contribution from termination mismatching.

Features
• Highly integrated bus termination network
• 1% absolute tolerance terminations
• Ultra-low crosstalk
• 18 terminating Lines in QSOP package
• Saves board space and improves system reliability
• Reduces assembly cost and rework

Applications
• Pentium® Pro servers & desktop systems
• Engineering workstations
• Embedded processor systems
• GTL, ECL, NTL, HSTL terminator

Product Description
High speed microprocessors like Intel’s Pentium® Pro Processor, demand unique, high speed bus termination schemes. The PACR6G series network provides 18 terminations per package. Four termination resistor values are available. The 47, 50 and 56 ohm terminations are suitable for use with the Intel server chip set and the 68 ohm termination is suitable for use with the Intel desktop chip set. The tight resistor tolerance minimizes noise contribution from termination mismatching.

Features
• Highly integrated bus termination network
• 1% absolute tolerance terminations
• Ultra-low crosstalk
• 18 terminating Lines in QSOP package
• Saves board space and improves system reliability
• Reduces assembly cost and rework

Applications
• Pentium® Pro servers & desktop systems
• Engineering workstations
• Embedded processor systems
• GTL, ECL, NTL, HSTL terminator